Panasonic Live Switcher Aw Sw350 Operating Instructions

21 20
The AW-SW350 Live Switcher comes with a function for transferring images from the host
computer using the USB (Universal Serial Bus). The image data transferred from the host
computer can be used as the key input signals or main input signals of the AW-SW350.
When the image transfer function is to be used for the first time, the dedicated device driver
and application program must be installed in the host computer. They can be installed from
the CD-ROM that is supplied with the AW-SW350. For...

23 22
INSTALLING THE DEVICE DRIVERThis section describes how to install the device driver used with the USB image transfer
program for the AW-SW350. In the example of the procedure given below, Windows XP is
used as the operating system.
Insert the CD-ROM supplied with the AW-SW350 in the CD-ROM drive of the host
computer. (In this example, E: is the drive used.)
Set the AW-SW350s Power Switch to ON, check that the Power Indicator has lighted,
and connect one end of the A-B type USB cable to the USB...

25 24
INSTALLING THE APPLICATION PROGRAMThis section describes how to install the application program used with the USB image
transfer program for the AW-SW350. In the example of the procedure given below,
Windows XP is used as the operating system.
Insert the CD-ROM supplied with the AW-SW350 in the CD-ROM drive of the host
computer. (In this example, E: is the drive used.)
Run the “Microsoft .Net Framework” setup file (E:\JPN\DOTNETFX.EXE).
The installer program shown in Fig.6 now starts. Proceed with...

27 26
OPERATION METHODThis section describes how to operate the application program used with the USB image
transfer program for the AW-SW350.
Connect the host computer to the AW-SW350. 
(Check that the AW-SW350s power is on.)
The main screen shown in Fig.9 appears when the application program used with the
USB image transfer program for the AW-SW350 is started up.
When the “Open File” button is clicked, the file selection dialog box shown in Fig.10
appears. Select the image file (BMP, JPG or JPEG) to...

29 28
When the target image appears in the image display area, specify the start or cutout
position of the image. Which position is to be specified is determined by the number of
pixels in the image file.
• No. of pixels that can be displayed: 720 (H) x 487 (V)
• When the file is smaller than the number of pixels that can be displayed:
The spaces around the image are displayed in black. Move the image to the position
where it is to be displayed.
• When the file is larger than the number of pixels that...

31 30
Click the “RAM” radio button or “RAM+ROM” radio button to select the type of memory
in which the data will be saved. (Fig.13) If “RAM” is selected, the image data is saved
only in the frame memory and so it cannot be used after the AW-SW350 power has
been turned off and back on again. If “RAM+ROM” is selected, the image data is saved
in the flash memory and so it can be used after the AW-SW350 power has been turned
off and back on again. However, the actual transfer takes longer than when “RAM” is...

33 32
CONNECTION FOR EXTERNAL SYNCHRONIZATION 
(Frame Synchronizer OFF)Adjust the horizontal and color phases of the cameras.
(Read the manual for the camera.)
CONNECTION WITHOUT EXTERNAL SYNCHRONIZATION
(Frame Synchronizer ON)CONNECTIONSFor installation and connection, be sure to ask the store where you purchased the product.
Before making any connection, switch off all the components of the system.
Carefully read the manuals for the individual devices connected to the Live Switcher.
Use coaxial...

35 34
CONNECTION TO PERSONAL COMPUTER
E600
E600
E600
E600
Windows PC
BBOUT
GLIN
/BBOUTPVW
OUTTALLY & INCOM
PGM  OUT
2
54
DC 12V IN
SET  UPUSBEXT
TAKE
PGMY / COUT
1342
GND
32111
75Ω
AUTO 2 3 4 5
1 2 3 4 5
VIDEO
IN
OUT
Y / C  IN
AW-SW350
Convertible  Camera AW —
E600
Convertible  Camera AW —
E600
Convertible  Camera AW —
E600
OUT
VIDEO OUTVIDEO OUT
Convertible  Camera AW —
E600
VIDEO OUT
These switches operate whether the FS
switch is in the ON or OFF position. Color monitors
Connected with 
USB cable
AC...

37 36
EXAMPLE FOR THE CONNECTION WITH PAN/TILT HEADS
AND CONTROL PANELThe cameras can be locally controlled by using the pan/tilt head AW-PH300A, 
multi-hybrid control panel AW-RP505, and multi-port hub AW-HB505.
TALLYDC12V IN
AUX  CONTROL  IN
1 2 3 4
5 
PREVIEW IN OUT G/L  OUTPREVIEW MONITOR OUT
CONTROL CONTROL  OUTPAN/TILT CAMERA
TD  MULTI  PORT  HUBG / L  IN
E600
E600
E600
VIDEO OUT 1-4
E600
G/L IN G/L OUT
CAMERA
CONTROL OUTCAMERA
CONTROL IN VIDEO OUTPAM/TILT
CONTROL OUTPAM/TILT
CONTROL IN
S-VIDEO...

39 38
RACK MOUNTINGRACK MOUNTINGDo not mount the Live Switcher on a closed rack or bookshelf. 
(Otherwise, heat will build up inside and may cause a fire.)
Keep the ventilation port open to secure good flow of air.
POW
ERIN
C
O
M
L
E
V
E
L
G
E
N
-L
O
C
K
 P
H
A
S
E
WIPE  PATTERN
T
R
A
N
S
I
T
IO
N
  T
I
M
EKEY
SETTINGCOLORW
H
1
S
F
0WH2
SF1WH3
AUTO  TAKEKEY  AUTO
A
G
A
I
NSOURCEI
N
5FMEM
KEY  AUTOCLIP
SF2
Y
L
W
M
W
RCYN
INTGRN
FRZ
M
G
TREDBLEN
N / R
RINV
HS
CSC FINE
ONOFF
A
1234
5
F
M
E
MB
L
A
C
K
W...