Panasonic Live Switcher Aw Sw350 Operating Instructions

POWERINCOM
LEVEL
GEN-LOCK PHASE
WIPE  PATTERN
TRANSITION  TIMEKEY
SETTING COLOR
WH1
SF0WH2
SF1WH3AUTO  TAKE KEY  AUTO
A
GAINSOURCEIN5FMEM
KEY  AUTOCLIP
SF2
YLW
MWRCYN
INTGRN
FRZ
MGT RED BLE
N
N / R
R INV
H
SCSC FINEONOFF
A
12 3 4
5
FMEMBLACK
MIX FRZWIPEAUTO    TAKE
BAR COLOR
B
B
Live Switcher  AW-SW350
Model No. 
AW-SW350P
Before attempting to connect, operate or adjust this product, please
read these instructions completely.
Live Switcher 

3 2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point...

5 4
CONTENTS
WARNING/CAUTION FOR SAFETY ..................................................................................... 5
PREFACE .............................................................................................................................. 6
FEATURES ........................................................................................................................... 6
PRECAUTIONS...

7 6
The AW-SW350 has five video inputs, wipe, mix and key synthesis functions despite its
compact dimensions. Since it has a built-in frame synchronizer, it accepts the input of
asynchronous signals. Moreover, it enables systems to be configured using the black burst
signals which it outputs, and it supports external synchronization (or genlock) to external sync
signals as well. Its image transfer function enables the images and text created using a
personal computer to be captured in the switcher...

QPower Indicator [POWER]
Lights (green) when power is supplied to DC Power Input Terminal Land Power Switch W
set to the ON position, and goes out when Power Switch Wis set to the OFF position.
WPower Switch [POWER ON/OFF]
Power is switched on and Power Indicator Qlights when this switch is set to the ON
position, provided that power is supplied to DC Power Input Terminal L. Power is switched
off and Power Indicator Qgoes out when the switch is set to the OFF position.
9 8
MAJOR OPERATING CONTROLS AND...

11 10
INV: This is used to invert the polarity of the key signal.
Use the inversion mode when the input is black text on a white base.
When the INV function is used with VIDEO IN 5 selected for the key source
and with the FS switch in the OFF position, only the Video Input 5 signal will
be set to the FS ON status.
TColor Background Color Selector Switch [COLOR]
This functions as the shift key of the Wipe Pattern Selection Switches. While it is pressed,
the Wipe Pattern Selection Switches can select the...

13 12
KEY AUTO: This switch is used to set the key synthesis to ON or OFF.
When it is pressed, it lights, and key synthesis is performed for the text, etc.
KEY AUTO Uis used to set the transition time for the key synthesis. When
the switch is pressed again, it goes off, and the input signals used for the
key synthesis will be synthesized as they are with the base image but,
depending on the level of the input signals, it may not be possible to
achieve clean and clear images.
SOURCE: This selects whether...

tMix Switch [MIX]
Press it to switch the signal selected with A-Bus Input Selection Switch }to the signal
selected with B-Bus Input Selection Switch qor vice versa by the mix effect. The switch
lights when MIX is selected.
yWipe Switch [WIPE]
Press it to switch the signal selected with A-Bus Input Selection Switch }to the signal
selected with B-Bus Input Selection Switch qor vice versa by the wipe effect. The switch
lights when WIPE is selected.
uAuto Take Switch [AUTO TAKE]
This switch is used for...

DGenlock Input/BB Output Connector [GLIN/BBOUT]
In compliance with the setting of the SETUP switch K, either the genlock input or BB
output is selected.
Genlock input: To apply genlock to the switcher, connect this signal to the signal generator
or other device.
BB output: At this position, the BB sync signal is output to apply genlock to a camera or
other input device by synchronizing it to the switcher. In this case, the same
signal as BBOUT Fis output.
FBlack Burst Signal Output Connector [BBOUT]
Used...

RBus Selector Switch [BUS A/B /F.F.]
This selects the bus switching system.
A/B: Set here when undertaking bus operations using the A/B bus system.
F.F.: Set here when undertaking bus operations using the flip-flop system.
LDC Power Input Terminal [DC 12V IN]
Apply 12-V DC power. (Use the AC adaptor AW-PS505.)
✽The AW-CA4T1 cable (sold separately) is required.
:Tally/Intercom Connectors [TALLY & INCOM 1, 2, 3, 4, 5]
Use these jacks to connect the Live Switcher to the tally/intercom connectors on a...