Panasonic Lifi Hdtv Pt 50lcz70 Operating Instructions

							21
Getting Start ed
These diagrams show our recommendations for how to connect this Projecti\
on Display to your various equipment.
For other connections, consult the instructions and the specifications f\
or each piece of equipment. (p. 63)
For additional assistance, please visit our website at:  www.panasonic.com
 www.panasonic.ca
Notes
The picture and audio input signals connected to a terminal specified in\
 “Monitor out” (p. 50) cannot be output from “OUTPUT” 
terminals. However, audio output can be obtained from “DIGITAL AUDIO \
OUT” terminal.
To prevent howling and image oscillation, set the “Monitor out” se\
tting when connecting the VCR with loop-connection. (p. 50)
When equipment (STB, DVD, etc.) is connected to HDMI or COMPONENT term\
inals, only audio signals can be obtained. From the 
output terminals, no video signals can be passed.
When receiving digital channel signals, all digital formats are down-con\
verted to composite NTSC video to be output through the 
OUTPUT terminals.
•
•
•
• SD Card Slot
To watch DVDs
DVD Player/Set Top Box
■To listen to the TV 
through speakers
Amplifier
■To watch PC■To watch camcorder 
images
Camcorder/VCR/DVD 
Player
■
DVD Recorder/ VCR■
or
or
Back of the unit
Front of the unit
Recommended AV Connections
or
Cable TV
Cable Box
Power Cord
(Connect after all the 
other connections.)
or or
or
or
or
or
or
Or
Or
Or
AC 120 V 
60 Hz 
						

							22
 EZ Sync™ Connections
Follow the connection diagrams below for HDAVI control 
of a single AV piece of equipment such as a Panasonic 
DIGA-DVD recorder, RAM theater, or Player theater system. 
Refer to pages 52-54 for Setup Menu settings and additional 
control information.Optional HDMI and/or optical cables are not provided.
•
If the connection (or settings) of equipment compatible with 
HDAVI control has been changed, switch the power of this 
unit Off then On again while the power of all equipment is 
On (so that the unit can correctly recognize the connected 
equipment) and check that DIGA, RAM theater, and Player 
theater playback operate.
Note
HDMI 1 is recommended. When connecting to HDMI 2 or HDMI 3, set the inpu\
t mode to HDMI 2 or HDMI 3 (p. 29) initially before 
connecting to HDMI 2 or HDMI 3. After connection, confirm the HDMI contr\
ol functions (p. 52-54).
•
One AV amp and one DIGA recorder can be operated with this unit.
Be sure to connect the AV amp between this unit and the DIGA recorder.
Setting this unit after connections
After making connections as shown above, set “EZ Sync” (under “\
EZ Sync setting”) first to “Off” and then “On” using 
the Setup Menu. (p. 52-53)
•
•
■
DIGA
(Panasonic DVD 
Recorder)
Connecting this unit to the DIGA, RAM 
theater, Player theater, or HD Camcorder
For DIGA : Connect with HDMI cable
For RAM theater and Player theater :
Connect with the HDMI and audio cables. If audio cable 
is not connected, you cannot listen to the TV program 
through the theater system.
For HD Camcorder : Connect with HDMI cable
(HDMI 3 is recommended when connecting to a 
Camcorder via HDMI.)
■
•
•
•
Connecting this unit to a DVD recorder and 
AV amp
When using an “EZ Sync” audio-video amplifier 
and a compatible DIGA recorder, use a daisy chain 
connection as shown below.
■
Notes
Individual HDMI equipment may require additional menu settings specific \
to each model. Please refer to their respective operating 
instruction manuals.
When audio from other equipment connected to this unit via HDMI is outpu\
t using “DIGITAL AUDIO OUT” of this unit, the system 
switches to 2CH audio. (p. 52-53)
(When connecting to an AV amp via HDMI, you can enjoy higher sound qual\
ity.)
•
• or
Panasonic AV amp
Panasonic RAM theater/
Panasonic Player theaterDIGA
(Panasonic DVD 
Recorder) Panasonic HD 
Camcorder
HDMI
(AV OUT)
HDMI
(AV OUT)
AUDIO 
IN
HDMI
(AV IN)
HDMI
(AV OUT)
Recommended AV Connections (continued)
HDMI
(AV OUT)
or
or 
						

							23
Getting Start ed
HDMI connection
HDMI (high-definition multimedia interface) allows you to enjoy high-d\
efinition digital images and high-quality sound by 
connecting this Projection Display and the devices.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, su\
ch as a Set Top Box or a DVD player, can be 
connected to the HDMI connector using an HDMI compliant (fully wired) \
cable.
HDMI is the world’s first complete digital consumer AV interface comp\
lying with a non-compression standard.
If the external equipment has only a DVI output, connect to the HDMI ter\
minal via a DVI to HDMI adapter cable (*2).
When the DVI to HDMI adapter cable is used, connect the audio cable to t\
he audio input terminal.
Audio settings can be made on the “HDMI 1 in”, “HDMI 2 in” o\
r “HDMI 3 in” menu screen. (p. 39)
Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz\
, 32 kHz
(*1): The HDMI logo is displayed on an HDMI-compliant device.
(*2): Enquire at your local digital equipment retailer shop.
Notes
Use with a PC is not assumed.
All signals are reformatted before being displayed on the screen.
If the connected device has an aspect adjustment function, set the aspec\
t ratio to “16:9”.
This HDMI connector is “type A”.
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital \
Content Protection) copyright protection.
A device having no digital output terminal may be connected to the input\
 terminal of either “COMPONENT”, “S VIDEO”, or “VIDEO”\
 
to receive analog signals.
The HDMI input terminal can be used with only the following image signal\
s:  480i,   480p,  720p,  1080i and  1080p. Match the output 
setting of the digital device.
For details of the applicable HDMI signals, see below.
About  HDMI
HDMI is the first all digital consumer electronics A/V interface that su\
pports several uncompressed standards, enhanced 
and high-definition video formats as well as all existing multichannel a\
udio formats. One jack supports both video and 
audio information. The HDMI/HDCP*
1 input can be connected to an EIA/CEA 861/861D*2 compliant consumer electronic 
device, such as a Set Top Box or DVD player equipped with a HDMI output \
connection. By inputting a High-bandwidth 
Digital Content Protection (HDCP) high-definition picture source to th\
e HDMI terminal of this unit, high-definition pictures 
can be displayed on the screen in their digital form. The HDMI input ter\
minal is not intended to be used with personal 
computers. This unit is compatible with 1080p, 1080i, 720p, 480p and 480\
i formats. Select the output of the connected 
device to match that of the unit.
*1  HDMI/HDCP = High-Definition Multimedia Interface / High-Bandwidth Digita\
l Copy Protection.
*2  EIA/CEA-861/861D Profiles compliance covers profiles for transmission of\
 uncompressed digital video including high bandwidth  digital content protection.
Input signals that can be displayed
*Mark : Applicable input signal for Component (Y, PB, PR) and HDMI
Notes
Signals other than those shown above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Horizontal frequency (kHz) Vertical frequency (Hz) COMPONENT
HDMI
480i 15.75/15.73 60/59.94
**
480p 31.50/31.47 60/59.94
**
720p 45.00/44.96 60/59.94
**
 1080i 33.75/33.72 60/59.94
**
1080p 67.50/67.43 60/59.94
*Horizontal frequency (kHz) Vertical frequency (Hz) COMPONENT HDMI
480i 15.75/15.73 60/59.94
**
480p 31.50/31.47 60/59.94
**
720p 45.00/44.96 60/59.94
**
 1080i 33.75/33.72 60/59.94
**
1080p 67.50/67.43 60/59.94
* 
						

							24
Turning the Power ON and OFF
Always be sure to follow the procedure given below to 
turn the Projection Display power ON and OFF.
The lamp cooling fan will continue to operate for 
approximately 3 minutes after the power is turned off. During 
this time, the POWER indicator will blink Red.
Do not disconnect the power cord from the outlet 
and do not open the circuit breaker (unless 
necessary) while the cooling fan is still operating. Do 
not disconnect the power cord from the power outlet 
while the power indicator blinks Red.
•
POWER indicator
 POWER  button
POWER indicator
 POWER  button
Power ON / OFF
Notes
If the POWER button is accidentally turned off during use, 
after power is turned back on, it may take a short period 
before the lamp automatically comes on.
This unit consumes approx. 0.4 W in OFF condition when 
plugged into an AC outlet.
Power ON
Press  POWER on Projection Display or Remote Control 
to turn power on.
The Power Indicator blinks Green for about 10 seconds and 
then turns solid Green.
Picture display may be delayed when the unit has not been 
used for a long time or ambient temperature is low.
The fan rotating sound may be increased in high temperature 
condition.
Power OFF
Press POWER on Projection Display or Remote Control 
to turn power off.
Power shuts off after a Black Screen is displayed for about 
3 minutes. If the POWER button is pressed during the Black 
Screen display, Power is turned back on.
The Power Indicator blinks Red for about 3 minutes and then 
LED turns off.
•
•
•
•
•
•
• The Power Indicator
LED
ACTION
Off Power – OFF
Red (blinking) Power – OFF (Now cooling)
Green Power – ON
Green (blinking) Power – ON (Preparing to light lamp)
The Power IndicatorLED
ACTION
Off Power – OFF
Red (blinking) Power – OFF (Now cooling)
Green Power – ON
Green (blinking) Power – ON (Preparing to light lamp)
 Auto shut off
If “No signal shut-off” has been selected “Set”, the TV will\
 
automatically turn off if NO SIGNAL is present for more 
than 10 minutes. (p. 54-55)
If “No action shut-off” has been selected “Set”, the TV will\
 
automatically turn off if no key has been pressed for more 
than 3 hours. (p. 54-55)
•
•
 Auto shut off
If “No signal shut-off” has been selected “Set”, the TV will\
 
automatically turn off if NO SIGNAL is present for more 
than 10 minutes. (p. 54-55)
If “No action shut-off” has been selected “Set”, the TV will\
 
automatically turn off if no key has been pressed for more 
than 3 hours. (p. 54-55)
•
• 
						

							25
Basic Operation
 First Time Setup
For your convenience, First Time Setup menu will 
be displayed on screen when the set is turned on 
for the first time. If needed, follow the menus and 
procedures displayed on-screen for setting up the 
features.
Language
The language of the on-screen display is set to English 
as the factory setting. You can select English, Spanish or 
French as the on-screen display language.
Procedure
1. Press ▲▼ to select “Language”.
2.  Press OK to display the Language menu.
3. Press  ◄► to select “English,” “Español” or 
“Français”.
4.  Press RETURN to go to previous screen.
Auto program
You can scan All (Analog and Digital) channels. If 
needed, follow the menus and procedures displayed 
on-screen for setting up the features. You can also make 
the settings in Setup menu.
Procedure
1. Press  ▲▼ to select “Auto program”.
2.  Press OK to display the Program channel  menu.
3. Press  ▲▼ to select “ANT in”.
4. Press  ◄► to select “Cable” or “Antenna”.
Language
Auto program
 Picture
First time setup
Language
Auto program
 Picture
First time setup
 Language  English
Language
 Language English
Language
Language
 Auto program
 Picture
First time setup
Language
 Auto program
 Picture
First time setup
 ANT in
 Auto Cable
Program channel
 ANT in
 AutoCable
Program channel
5. Press 
▲▼ to select “Auto”.
6.  Press OK to display the Auto program menu.
7. Press  ▲▼ to select “All channels”, “Analog 
only”, or “Digital only”.
8.  Press OK to start scan.
Channels available for reception will be set automatically.
9.  After Auto program is complete, the unit will  return to Manual program mode. To place 
the channels that were located by auto scan 
in memory, move the cursor to “Apply” and 
press OK. (p. 27-28)
If OK is not pressed after selecting APPLY, 
the channels will not be memorized.
10. Press  ▲▼ to select “Picture”.
11. Press OK to display the Picture menu. (p. 35)
Notes
After “Auto program” is completed the unit tunes to the first 
channel found during “Auto program”.
If setup is incomplete, check connection of Antenna/Cable to 
the RF IN Terminal, then try “Auto program” again. (p. 26-27)
“Auto program” must be done when you select the input 
signal for the first time or whenever you change the antenna 
configuration.
Depending on conditions, “Auto program” may take a while. •
•
•
•
•
 ANT in
 Auto Cable
Program channel
 ANT in
 AutoCable
Program channel
All channels
 Analog only
 Digital only
Auto program
Auto programScanning digital channel
Progress
Quit 40%
All channels
 Analog only
 Digital only
Auto program
Auto programScanning digital channel
Progress
Quit 40%
 Language
 Auto program
 Picture
First time setup
 Language
 Auto program
 Picture
First time setup 
						

							26
 Switching languages for display
Allows you to select the language used for 
On-Screen Displays.
Procedure
1.  Press MENU to display the Main Menu screen.
2. Press  ▲▼ to select “Setup” icon.
3.  Press OK to display the Setup menu.
4. Press  ▲▼ to select “Language”.
EZ Sync
  Picture
  Audio Timer
  Lock Memory card
Setup
Menu
EZ Sync  Picture
  Audio Timer
  Lock Memory card
Setup
Menu
5.  Press OK to display the Language menu.
6. Press  ◄► to select “English,” “Español” or 
“Français”.
7.  Press RETURN to go to previous screen.
 Automatic program setting
Automatically searches and adds receivable 
channels to memory.
Procedure
1.  Press MENU to display the Main Menu  screen.
2. Press  ▲▼ to select “Setup” icon.
3.  Press OK to display the Setup menu.
4. Press  ▲▼ to select “Program channel”.
5.  Press OK to display the Program channel  menu.
 Surf mode
All
 Language
 Program channel
 External devices
 CC
 EZ Sync setting
Setup1/2
 Surf mode All
 Language
 Program channel
 External devices
 CC
 EZ Sync setting
Setup1/2
 Language  English
Language
 Language English
Language
EZ Sync
  Picture
  Audio Timer
  Lock Memory card
Setup
Menu
EZ Sync  Picture
  Audio Timer
  Lock Memory card
Setup
Menu
 Surf mode All
 Language
 Program channel
 External devices
 CC
 EZ Sync setting
Setup1/2
 Surf mode All
 Language
 Program channel
 External devices
 CC
 EZ Sync setting
Setup1/2
Tuning channels 
						

							27
Basic Operation
6. Press ▲▼ to select “ANT in”.
7. Press  ◄► to select “Antenna” or “Cable”.
8. Press  ▲▼ to select “Auto”.
9.  Press OK to display the Auto program menu.
10. Press  ▲▼ to select “All channels”, “Analog 
only”, or “Digital only”.
11. Press OK to start scan.
12. After Auto program is complete, the unit will  return to Manual program mode. To place 
the channels that were located by auto scan 
in memory, move the cursor to “Apply” and 
press OK. (p. 27-28)
If OK is not pressed after selecting APPLY, 
the channels will not be memorized.
Notes
Some channels with very weak signals may be locked into 
memory. If desired, these channels can be deleted man u al ly 
using the “Manual program setting”. (p. 27-28)
“Auto program” must be done when you select the input 
signal for the first time or whenever you change the antenna 
configuration.
•
•
 ANT in
 Auto
 Manual
 Signal meter
Cable
Program channel
 ANT in
 Auto
 Manual
 Signal meterCable
Program channel
 ANT in
 Auto
 Manual
 Signal meterCable
Program channel
 ANT in
 Auto
 Manual
 Signal meterCable
Program channel
All channels
 Analog only
 Digital only
Auto program
Auto programScanning digital channel
Progress
Quit 40%
All channels
 Analog only
 Digital only
Auto program
Auto programScanning digital channel
Progress
Quit 40%
 Manual program setting
Use this procedure when changing setting of 
receiving channels or changing the channel dis play.
Also, use to add or delete channels from channel list 
manually.
Procedure
1.  Press MENU to display the Main Menu 
screen.
2. Press  ▲▼ to select “Setup” icon.
3.  Press OK to display the Setup menu.
4. Press  ▲▼ to select “Program channel”.
5.  Press OK to display the Program channel  menu.
If Lock (p. 41) has been set, you must enter your 
password to display the Program channel menu.
6. Press  ▲▼ to select “Manual”.
7.  Press OK to enter the Manual program  screen.
•
EZ Sync
  Picture
  Audio Timer
  Lock Memory card
Setup
Menu
EZ Sync
  Picture
  Audio Timer
  Lock Memory card
Setup
Menu
 Surf mode All
 Language
 Program channel
 External devices
 CC
 EZ Sync setting
Setup1/2
 Surf mode All
 Language
 Program channel
 External devices
 CC
 EZ Sync setting
Setup1/2
 ANT in
 Auto
 Manual
 Signal meter Cable
Program channel
 ANT in
 Auto
 Manual
 Signal meterCable
Program channel 
						

							28
8. Press ◄► to select “Edit”.
9.  Press OK to enter the edit mode.
10. Press  ▲▼ to select the desired preset 
channel line.
11. Press  ◄► to select edit area (“Channel,” 
“Caption,” “Favorite,” “Add”).
Edit (Caption)
When a preset Caption has been entered.
1.  Press OK to display the Caption select  menu.
2. Press  ▲▼ to select “Caption”.
3. Press  ◄► to select Broadcast station.
4. Press  ▲▼ to select “Apply”.
5.  Press OK to enter the Caption.
When selecting a desired Caption manually.
1.  Press OK to display the Caption select  menu.
2. Press  ▲▼ to select “Caption detail”.
3.  Press OK to display the Caption detail  menu.
4. Press  ▲▼ to select “Caption”.
5.  Press OK to enter input field.
■
Edit ApplyCancelManual program
1...
Yes
...
2 ...
Yes
...
3 ...
Yes
...
4 ...
Yes
...
5 ...
Yes
...
6 ...
Yes
...
7 ...
Yes
...
8 ...
Yes
...Channel Caption
Favorite Add
Prev. page Next pageYGBOK
SelectRETURNR
Edit ApplyCancelManual program
1...
Yes
...
2 ...
Yes
...
3 ...
Yes
...
4 ...
Yes
...
5 ...
Yes
...
6 ...
Yes
...
7 ...
Yes
...
8 ...
Yes
...Channel Caption
Favorite Add
Prev. page Next pageYGBOK
SelectRETURNR
Caption
Caption detail
 Apply                   Cancel ---
Caption select
Caption
Caption detail
 Apply                   Cancel ---
Caption select
Caption
 Apply                   Cancel ---
Caption detail
Caption
 Apply                   Cancel ---
Caption detail
6. Press 
▲▼ to select the character to input/
change.
7. Press  ◄► to move to the character to 
input/change.
8.  Press OK to enter your selection.
9. Press  ▲▼ to select “Apply”.
10. Press OK to enter the Caption.
Edit (Favorite) 1.  Press OK to display the Set favorite menu.  (p. 31)
Edit (Add)
Setting of register/delete in Program channel.
1.  Press OK to select “Yes” or “No”.
12. Press RETURN to move cursor to “Apply”.
13. Press OK to enter your program.
■
■
Edit ApplyCancelManual program
1...
Yes
...
2 ...
Yes
...
3 ...
Yes
...
4 ...
Yes
...
5 ...
Yes
...
6 ...
Yes
...
7 ...
Yes
...
8 ...
Yes
...Channel Caption
Favorite Add
Prev. page Next pageYGBOK
SelectRETURNR
Edit ApplyCancelManual program
1...
Yes
...
2 ...
Yes
...
3 ...
Yes
...
4 ...
Yes
...
5 ...
Yes
...
6 ...
Yes
...
7 ...
Yes
...
8 ...
Yes
...Channel Caption
Favorite Add
Prev. page Next pageYGBOK
SelectRETURNR
Tuning channels (continued) 
						

							29
Basic Operation
 Selecting Input Mode
Procedure
1.  Press TV/VIDEO to display the Input select menu.
2.  Press corresponding NUMBER keys to select  the input of your choice. Or, press  ▲▼ to 
select the input of your choice, then press 
OK.
If, during selection, no action is taken for several seconds, 
the Input selection menu is exited and the current input is 
automatically selected.
•
 TV
Component 1
 Component 2
 HDMI 1
 HDMI 2
 HDMI 3
 Video 1
 Video 2
 Video 3
 PC
1
2
3
4
5
6
7
8
9
0
Input select
 TV
Component 1
 Component 2
 HDMI 1
 HDMI 2
 HDMI 3
 Video 1
 Video 2
 Video 3
 PC
1
2
3
4
5
6
7
8
9
0
Input select
Note
If SKIP is set as the Input Label setting, the mode will not be 
changed. (p. 50)
Card input mode (Photo viewer) is selected.
Procedure
1.  Press SD to display Photo viewer mode.
 Rapid Tuning
Switches between the current and last channel or input 
modes.
Procedure
1.  Press R-TUNE to switch to previously viewed 
channel or input modes.
Note
When Photo viewer (p. 46) is used, Rapid Tuning is not 
available.
Using the  CH/ VOL Button
Select desired channel:
Press CH < > or NUMBER keys.
Adjust to desired volume level:
Press VOL+ or VOL-.
Notes
The channel number and volume level are stored even after 
the unit is turned off.
Power consumption can be reduced if the volume level is 
lowered.
•
■
•
■
■
•
•
Component 1
Signal of source connected to COMPONENT 
VIDEO INPUT 1 is displayed.
Component 2 Signal of source connected to COMPONENT 
VIDEO INPUT 2 is displayed.
 HDMI 1 Signal of source connected to HDMI IN 1 is 
displayed.
HDMI 2 Signal of source connected to HDMI IN 2 is 
displayed.
HDMI 3 Signal of source connected to HDMI IN 3 is 
displayed.
Video 1 Signal of source connected to VIDEO INPUT 
1 is displayed.
Signal of source connected to S VIDEO 
INPUT is displayed.
Video 2 Signal of source connected to VIDEO INPUT 
2 is displayed.
Video 3 Signal of source connected to VIDEO INPUT 
3 is displayed.
 PC Signal of source connected to PC IN is 
displayed.Component 1 Signal of source connected to COMPONENT 
VIDEO INPUT 1 is displayed.
Component 2 Signal of source connected to COMPONENT 
VIDEO INPUT 2 is displayed.
 HDMI 1 Signal of source connected to HDMI IN 1 is 
displayed.
HDMI 2 Signal of source connected to HDMI IN 2 is 
displayed.
HDMI 3 Signal of source connected to HDMI IN 3 is 
displayed.
Video 1 Signal of source connected to VIDEO INPUT 
1 is displayed.
Signal of source connected to S VIDEO 
INPUT is displayed.
Video 2 Signal of source connected to VIDEO INPUT 
2 is displayed.
Video 3 Signal of source connected to VIDEO INPUT 
3 is displayed.
 PC Signal of source connected to PC IN is 
displayed.
Photo
(Photo viewer) Signal of source connected to CARD SLOT 
is displayed.Photo
(Photo viewer) Signal of source connected to CARD SLOT 
is displayed.
Projection Display Operation 
						

							30
 Channel and Program Tuning
Channel and Program tuning in digital television differs 
from conventional television. With  DTV, many programs 
can exist within a single 6 MHz channel. These channels 
behave as sub-channels within a single channel. When 
tuning to a digital channel, the unit will also tune to a 
program and will indicate the channel and program in the 
on-screen Channel Banner display.
In order to select channels properly, Auto program must 
be performed. (p. 26-27)
Follow the procedure below to directly enter the channel 
number using the NUMBER keys.
Select analog channel
Procedure
1.  Press the  NUMBER keys to enter the Channel number. Press OK.
The following is an example of tuning to channel 15.
Note
If, during channel selection, no action is taken for several 
seconds, the Channel Banner is exited and the currently input 
channel is automatically selected.
Select digital channel
Procedure
1.  If tuning a digital channel and your channel contains more than one program, press 
PROG- and enter the program (1, 2, 3 etc.) 
using the NUMBER keys. Press OK.
The following is an example of tuning to channel 15-1.
Note
If, during channel selection, no action is taken for several 
seconds, the Channel Banner is exited and the currently input 
channel is automatically selected.•
•
•
• Direct Tuning Example
Step Action Channel Banner Display
1 Press 1 1
2 Press 5 15
3 Press OK 15
Direct Tuning ExampleStep Action Channel Banner Display
1 Press 1 1
2 Press 5 15
3 Press OK 15
Direct Tuning Example
Step Action Channel Banner Display 1 Press 1 1
2 Press 5 15
3 Press PROG- 15-
4 Press 1 15-1
5 Press OK 15-1
Direct Tuning ExampleStep Action Channel Banner Display
1 Press 1 1
2 Press 5 15
3 Press PROG- 15-
4 Press 1 15-1
5 Press OK 15-1
Projection Display operation (continued)
 Unit Status Display
Press CH < > or  RECALL, except when the MENU 
screen is dis played, to display current unit status 
information.
Channel Banner: Minimized
Procedure
1. Press CH < > to minimize the displayed 
channel banner.
It will display the channel number, and the station 
identification (if available).
Channel Banner: Maximized
Procedure
1.  Press RECALL to maximize the displayed  channel banner.
 Audio Mute
Press  MUTE to instantly mute the sound. Press again to 
restore the previous sound level.
Procedure
1.  Press MUTE to mute the sound. Press again to reactivate sound.
Sound is also reactivated when power is turned off or 
volume level is changed.
Note
The audio output from AV OUT is not muted.•
•
•
15-2
ABC-HD
Channel Number
Station Identifier
15-2
ABC-HD
Channel NumberStation Identifier
CC SAP Andrew’s cooking show TV-G 4:31080i Standard
15-2
ABC-HD
30
Closed Caption
Channel, Program and Station identifier
SAP indication
Signal resolutionPicture mode
Aspect ratioTime remaining 
in Sleep Timer
Rating Level
Program title
CC SAP Andrew’s cooking show
TV-G 4:31080i Standard
15-2
ABC-HD
30
Closed Caption
Channel, Program and Station identifier
SAP indication
Signal resolutionPicture mode
Aspect ratioTime remaining 
in Sleep Timer
Rating Level
Program title