Panasonic Lcd Tv Tc 22lh30 Operating Instructions

							21
1
2
Press to select PICTURE ADJUST.
Press to select the sub-menu.
Adjust the setting watching the picture
behind the menu.
Press to activate the setting if necessary.
PIC MODE
Press to display the PICTURE ADJUST screen.
CH
CH VOL VOLO K
MENUADJUST
PICTURE
AUDIOSET  UP
PICTURE  ADJUST
POSITION / SIZE
AUDIO  ADJUST
PICTURE  ADJUST  PAGE 2/2
NORMAL
PIC  MODE
BACK  LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI  PICTURE+ 20
+ 20
0
0
0
0
OFF     ON
CUSTOM
PICTURE  ADJUST  PAGE 1/2
COLOR TEMP
NORMAL
ADVANCED ADJUST  
OFF  ON
NORMAL
 MID
MID
MID EDGE TRANS.
GRAY EMPHASIS
GAMMA ADJUST
 + 8
+ 8 BLACK EXTENSION
WHITE CHAR CORR
ADVANCED ADJUST
3ADVANCED ADJUST
Press to select ADVANCED ADJUST.
Press to select ON.
CH
CH VOL VOLO K
NORMAL / NORMALIZE
Select “NORMALIZE” and press “OK” to return each PIC MODE to the factory default setting.
Notes:
•“NORMAL” means the PIC MODE is in the factory default setting. “NORMAL” changes to “NORMALIZE”
when you change the setting of BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS, AI
PICTURE, COLOR TEMP or ADVANCED ADJUST.
•You can normalize each PIC MODE separately.
MODE
STANDARD
CINEMA
VIVID
CUSTOM
Function
Displays a standard image.
Ideal for watching movies in a dark room.
Displays a clear image with high contrast.
You can customize the picture settings to suit your preference (see page 22,
ADVANCED ADJUST).
4CH
CH VOL VOLO K
Press to display the sub-menu.
PICTURE MODE is stored for TV, VIDEO1, VIDEO2, COMPONENT1,COMPONENT2 and HDMI individually.
The CUSTOM setting is stored for TV, VIDEO1, VIDEO2, COMPONENT1, COMPONENT2 and HDMI
individually.
CH
CH VOL
VOLO K
PICTURE ADJUST
Press the MENU button to display the MENU screen and select ADJUST. 
						

							22
Item
EDGE TRANS.
GRAY EMPHASIS
GAMMA ADJUST
BLACK EXTENTION
WHITE CHAR CORR
 Function
Improves edges in the background to reduce overshooting and improve the sense of depth.
Emphasizes the sharpness in density of many color differences.
Increases the brightness of the center ranges to improve detail and contrast in dark scenes.
Contrast level will be improved.
It makes white characters brighter.
ADVANCED ADJUST
PICTURE ADJUST
 Function
Luminance of the back light is adjusted.
Selects proper brightness and density for the room.
Adjusts for easier viewing of dark pictures such as night scenes.
Adjusts the level of color.
Adjusts for flesh tone color.
Adjusts the degree of sharpness.
Controls dark areas without affecting the black level or brightness in the overall picture.
Increases or decreases WARM (red) and COOL (blue) colors to suit personal
preference. BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS, AI PICTURE, COLOR TEMP
You can change the level of each Item (BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT,
SHARPNESS,  AI PICTURE and COLOR TEMP) for each MENU (STANDARD, CINEMA, VIVID and
CUSTOM) according to your personal preference.
Sub-menu
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI PICTURE
COLOR TEMP
(Color temperature)
(Only when you selected CUSTOM in PIC MODE) 
						

							23
For “ZOOM”  mode (see page 25)
•POSITION
Press to move the picture up or down.
•Press OK to return to the original position.
For “NORMAL” and “JUST” mode (see page 25)
•SIZE
Press to select the size.
Size 1: reduces black bar.
Size 2: widens black bar.
•Press OK to return to the original setting. Press to select POSITION/SIZE.
Press to display POSITION/SIZE screen.
POSITION/SIZE  
NORMAL 
POSITIONNORMALIZE
  SIZE
     1
RETURN
ZOOM
Size1
Size2
CH
CH VOL
VOLO K
MENUADJUST
PICTURE
AUDIOSET  UP
PICTURE  ADJUST
POSITION / SIZE
AUDIO  ADJUST
CH
CH VOL VOLO K
•SIZE
Press to shrink the picture vertically
[by 15 steps: 15 (original setting) down
to 1].
•Press OK to return to the original
setting.ZOOM
POSITION/SIZE 
						

							24
1
2
Press to select AUDIO ADJUST.
Press to display the AUDIO ADJUST
screen.
Press to select the sub-menu.
Select the setting while listening to the
sound.
Press to activate the setting if necessary.
MODE
• Red display : With signal
White display : No signal
White display (All modes) : MONO
• 
To change the mode using SAP button (see page 11).
STEREO / SAP / MONO
BASS
TREBLE
BALANCE
SURROUND
EQUALIZER
BASS, TREBLE, BALANCE, SURROUND,
EQUALIZER
You can change the level of each sub-menu (BASS,
TREBLE, BALANCE, SURROUND, EQUALIZER) for
each MODE (AUTO, STANDARD and DYNAMIC)
according to your personal preference.
STEREO
SAP
MONO
HDMI INWhen using HDMI connection (see page 9), this feature will let you switch between Analog Input and Digital Input.
AUTOAutomatically selects Analog / Digital signal.
DIGITALDigital Input only.
ANALOGAnalog Input only.
CH
CH VOL
VOLO K
CH
CH VOL VOLO K
AUDIO  ADJUST
NORMAL
 +   6
+   9
0 DYNAMIC
OFF     ON
OFF     ON
AUTO MODE
BASS
TREBLE
BALANCE
SURROUND
EQUALIZER
STEREO    SAP      MONO
HDMI INPAGE1/2
MENUADJUST
PICTURE
AUDIOSET  UP
PICTURE  ADJUST
POSITION / SIZE
AUDIO  ADJUST
NORMAL / NORMALIZE
Select “NORMALIZE” and press “OK” to return each MODE to the factory default setting.
Notes:
• “NORMAL” means the MODE is in the factory default setting. “NORMAL”
changes to “NORMALIZE” when you change the setting of BASS, TREBLE,
BALANCE, SURROUND, EQUALIZER or AUDIO LEVELER.
• You can normalize each MODE separately.
AUDIO  ADJUST
PAGE2/2
NORMAL
0
AUDIO LEVELER
AUDIO LEVELER
You can adjust the volume level for each of the input mode (TV, VIDEO1, VIDEO2, COMPONENT1,
COMPONENT2 and HDMI).Two channel Audio reception.
Second Audio  Programming
( typically used for bilingual audio ).
Select when stereo signal is weak.
Adjusts low frequencies.
Adjusts high frequencies.
Adjusts left and right volume.
To enjoy a concert hall effect,
select ON when stereo is playing.
Makes voice sound clear.
Normally set to ON.
AUTO
STANDARD
DYNAMIC
Automatically adjusts for a wide Dynamic Range.
Emits the original sound.
Gives contrast to sound.
AUDIO ADJUST
Press the MENU button to display the MENU screen and select ADJUST. 
						

							25
Each time you press the button:
NORMAL mode will display a 4:3 picture
at its standard 4:3 size without any
stretching.
ZOOM mode magnifies the central
section of the picture.
FULL will display the picture at its
maximum size but with slight elongation. JUST mode will display a 4:3 picture at
its maximum size but with aspect
correction applied to the sides of the
screen so that elongation is only
apparent at the left and right edges of
the screen. The size of the picture will
depend on the original signal.
Mode
Picture Explanation
NORMAL
ZOOM
FULL JUST
ASPECT Controls
This feature allows you to enjoy viewing the picture at its maximum size, including wide screen cinema
format picture.
Notes:
• This feature does not work for 1080i and 720p input signals.
• The aspect setting is stored separately for TV, VIDEO1, VIDEO2,
COMPONENT1, COMPONENT2 and HDMI.
JUST4
3
ZOOM4
3
FULL4
3
NORMAL
3 4
JUST ZOOMFULLNORMAL
ASPECT
TV/VCR
PLAY
R-TUNEPROG
STOP
T V
PAUSEREC
FF REW
VCR/DBS CH
0
ASPECT
TV/VCR 
						

							26
Press to select the code.
• The code starts from the current device.
• Press POWER button to test the operation.
• Repeat the steps until the component code is
found. It may take many attempts before the
correct code is found.
Press to store the code.
Operating peripheral equipment using the remote control
1
2
3
Enter the 3-digit infrared code
(see pages 27, 28).
•Factory default setting :
Panasonic
•Press POWER to test the
operation. Press and hold POWER and
OK together, for at least 5
seconds.
•The mode selection buttons
flashes, and then  release the
POWER and OK.
POWER  +
123
456
78
09
CH
CH VOL VOLO K
VCRDVD
DBS/CBL
TV
Select the type of the component.
•The selected button light and all
others go out.
Programming the remote control code
You can operate other manufacturers’ components using this TV’s remote control.
Preparations:
•Connect the plug of the external component to the wall outlet.
•Make sure the component is turned off.
Notes:
•If the component does not operate with the remote control, repeat
the procedure using another code. (Some brands have multiple
codes).
•If an incorrect code is entered, or if the procedure takes longer
than 30 seconds, the programming will fail.
To find the code not listed in the index
RETURN
EXITMENU
PLAY R-TUNESLEEP
PROGGUIDE RECALL MUTE TV/VIDEO
STOP
T V
PAUSEREC
FF REW
ASPECT
TV/VCR
VCR/DBS CH
SAP
CHO K
CH VOL VOL
POWER
VCRDVD
DBS/CBL
TV
123
456
78
09
After step 2 above, 
						

							27
Infrared Code Index
The Universal Remote Control is capable of operating many component brands after entering a code. Some
components may not operate because the codes are not available due to limited memory. The Universal
Remote Control does not control all features found in each model.
Write the code numbers from tables in this space. This will serve as a reference if you need to
program your Remote Control.
VCR
DVD
Operating peripheral equipment using the remote control
Codes for VCR
Brand Code
Orion 320, 326
Panasonic 321, 322, 323, 324
J.C.Penney300, 305, 310, 311, 324,
339, 345
Pentax 300, 311, 345
Philco320, 323, 324, 326, 331, 343
Philips 323, 324, 331
Pioneer 323
Proscan 300, 301, 302, 323, 324,
331, 333, 345, 346
Quasar 321, 322, 323, 324
Radio Shack305, 309, 324, 333, 336, 340
RCA 300, 301, 302, 323, 324,
331, 333, 345, 346
Realistic 305, 309, 324, 336, 340
Samsung 302, 304, 333
Sansui 320, 326, 339, 352
Sanyo 305, 309, 313
Scott 301, 302, 304, 309, 320,
326, 338, 340, 347, 348
Sears 300, 305, 306, 307, 308
Sharp 335, 336
Shintom 317
Signature 2000 335
Singer 317
Sony 328, 329, 330
Sylvania 323, 324, 331
Tashiro 306
Tatung 310, 311, 339
Teac 310, 311, 339
Technics 321, 322, 323, 324
Teknika 324
Toshiba 301, 346
Vector Research311
Wards 306, 309, 335, 336, 344
Yamaha 305, 310, 311, 339
Zenith 306, 344
Brand Code
Admiral 335
Aiwa 332
Akai 314, 315, 316, 329
Audio Dynamic311, 339
Bell &Howell 305, 313
Broksonic 320, 326
Canon 323, 325
Citizen 306
Craig 305, 306, 329
Curtis Mathes 324, 345
Daewoo 301, 324, 343
DBX 310, 311, 339
Dimensia 345
Emerson303, 319, 320, 325, 326, 343
Fisher 305, 307, 308, 309, 313
Funai 320, 326, 334
GE 324, 333, 345
Goldstar 306
Gradiente 334
Hitachi 300, 323, 345
Instant Replay 323, 324
Jensen 339
JVC 310, 311, 334, 339
Kenwood 306, 310, 311, 339
LXI300, 305, 306, 307, 308, 309
Magnavox 323, 324, 331
Marantz 310, 311, 339
Marta 306
Memorex 309, 324
MGA 338, 340, 341, 347, 348
Minolta 300, 345
Mitsubishi 338, 340, 341, 347, 348
Multitech 304, 347
NEC 310, 311, 334, 339
Olympic 323, 324
Optimus 306, 321, 328, 335
CABLEDBS
VCR
Brand Code
Panasonic Replay100
Philips Tivo 101
Sony Tivo 102
Codes for Personal Video Recorders
VCR 
						

							28
         Brand Code
ABC 124
Archer 125, 132
Cableview 105, 132
Citizen 105, 122
Curtis 112, 113
Diamond 124, 125, 132
Eagle 129
Eastern 134
GC Brand 105, 132
Gemini 122
General 111, 119, 120, 121, 122,
Instrument/ 123, 124, 125, 126, 127
Jerrold
Hamlin 112, 118, 140, 141, 142,
145
Hitachi 103, 124
Macom 103, 104, 105
Magnavox 133
Memorex 130
Movietime 105, 132
Oak 102, 137, 139
Panasonic 109, 110, 114
Philips 106, 107, 128, 129, 130
Pioneer 101, 116
Pulsar 105, 132
Codes for Cable Box
         Brand Code
Puser 132
RCA 115
Realistic 132
Regal 112, 118, 140, 141, 142,
145
Regency 134
Rembrandt 105, 132, 137
Samsung 105
Scientific Atlanta111, 112, 113
Slmark 101, 105
Sprucer 105, 110
Stargate 105, 132
Tel eview 101, 105
Texscan 144
Tocom 135
Toshiba 104
Unika 125, 132
Universal 122, 132
Videoway 106
Viewstar 129, 130
Zenith 100, 117
Zenith /Drae 100
Satellite
         Brand Code
Dish Network 105, 115, 116
Echo Star 105
(Echostar)
Express VU 105, 115
G.E. 106
G.I. 108
(General Instrument)
Gradiente 114
Hitachi 103, 111, 112
HNS (Hughes) 103
Codes for DBS
         Brand Code
Magnavox 101, 102
Panasonic 104
Philips 101, 102
Primestar 108
Proscan 106, 109, 110, 113
RCA 106, 109, 110, 113
Sony 107
Star Choice 103, 108
Toshiba 100
Uniden 101, 102
Operating peripheral equipment using the remote control
Brand Code
Denon 100
Ferguson 101
JVC 109
Mitsubishi 105
Nordmende 101
Panasonic 100
Philips 103
Pioneer 102
RCA 101
Codes for DVD
Brand Code
Saba 101
Samsung 110
Sharp 108
Sony 104
Technics 100
Thomson 101
Toshiba 103
Yamaha 100
Zenith 107
DVD
DBS/CBL
DBS/CBL 
						

							29
Operating peripheral equipment using the remote control
Mode Operational Key Chart
This chart defines which keys are operational after programming (if needed), while in the selected remote
control mode DTV, CABLE, DBS, VCR, DVD ...etc.
   KEY NAME TV MODE  CABLE MODE DBS MODE VCR MODE DVD MODE (DVD)
POWER POWER POWER POWER POWER
SAP ON/OFF-STB AUDIO TRACK--
MUTE TV MUTE STB MUTE TV MUTE TV MUTE
TV INPUT SW TV INPUT SW TV INPUT SW TV INPUT SW TV INPUT SW
ACTION ENTER STB ACTION TV ACTION-
VOL + / -CABLE VOL +/-TV VOLUME +/-TV VOLUME +/-
MENU-STB MENU--
DISPLAY-- -
EXIT-STB EXIT--
--STB GUIDE--
Select Channel Select Channel Select Channel Select Channel-
CABLE PREVIOUSSTB PREVIOUS--
SLEEP---
--VCR REW/FF
-- -PLAY PLAY
-- -PAUSE PAUSE
-- -STOP STOP
-- -VCR RECORD-
ASPECT-STB ASPECT TV/VCR  SWITCH OPEN/CLOSE
--PAGE UP/DOWN SLOW +/-
PREVIOUS CHAN
OR VIDEO MODE
CHANNEL
UP/DOWNCABLE CHANNELUP/DOWNSTB NAVIGATION
UP/DOWN
STB NAVIGATION
RIGHT/LEFTTV CHANNEL
UP/DOWNNEXT/PREVIOUSCHAPTER
ONSCREEN VCR
DISPLAY
VCR CHANNEL
UP/DOWNSKIP SEARCH
FF
STB PROGRAM/
DASH
POWER
SAP
MUTE
TV/VIDEO
MENU
RECALL
RETURNEXIT
GUIDE
R-TUNE
SLEEP
PROG
FF REW
PLAY
PAUSE
STOP
ASPECT
TV/VCR
VCR/DBS CH
CH
CH VOL VOLCH
CH VOL
VOLO K
123
456
78
09
REC 
						

							30
Estimado cliente de Panasonic
Bienvenido a la familia de clientes de Panasonic.
Esperamos sinceramente que disfrute durante muchos años de su nuevo  televisor
LCD.
Para obtener el máximo beneficio de su aparato, lea estas instrucciones antes
de hacer cualquier ajuste, y guárdelas para poder utilizarlas como referencia
en el futuro.
Guarde también el recibo de su compra, y anote el número del modelo y el
número de serie de su aparato en el espacio provisto en la cubierta posterior de
estas instrucciones.
Manuel de instrucciones [Resumen]
 
Precauciones relacionadas con la utilización de las pilas
La instalación incorrecta de las pilas puede causar fugas en las mismas que podrían estropear el transmisor
de mando a distancia.
1.   Utilice siempre pilas nuevas cuando reemplace las viejas.
2.   No intente cargar, cortocircuitar, desarmar, calentar o quemar las pilas usadas.
3.   El cambio de las pilas resulta necesario cuando el mando a distancia funciona esporádicamente o no
puede controlar esta unidad.3. Vuelva a colocar la cubierta. Se necesitan dos pilas AA.
1. Abra la cubierta de las pilas. 2. Instale las pilas. Tenga en cuenta las
polaridades (+ y -) al instalar las pilas.
Dos pilas tamaño AA
Instalación de las pilas del mando a distancia
El ángulo del soporte se puede ajustar entre 5° hacia delante y 10° hacia atrás, y se puede girar 20° hacia
la derecha/izquierda.
Ajuste el soporte con el ángulo deseado
POWERTV/VIDEO VOL CH