Panasonic Lcd Tv Tc 14la1 Operating Instructions

							 LCD TV
Operating Instructions
TQBC0543
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
English
Model No.TC-14LA1
TC-17LA1
TC-20LA1
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : [email protected]
or visit us at www.panasonic.com                                (U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com                      (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca                                 (Canada) 
						

							2
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance.

 Note to CATV System Installer: This reminder is provided to direct the CATV system installer’s
attention to Article 820–40 of the NEC that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.

 Important Safety Instructions for LCD TV
1)   Read these instructions and apply them with your LCD TV.
2)   Keep these instructions.
3)   Heed all warnings.
4)   Follow all instructions.
5)   Do not use this apparatus near water. For example: Avoid placing it near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
6)   Clean only with dry cloth. Unplug this LCD TV from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners.
7)   Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure
reliable operation of the LCD TV and to protect it from overheating. These openings must not be blocked
or covered. There should be at least 10 cm of space from these openings. The openings should never
be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface. This LCD TV should not
be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
8)   Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9)   Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
10) 
Only use attachments/accessories specified by the manufacturer. Otherwise it may cause hazards.
11) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus.  When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
12) Unplug this apparatus during lightning storms or when unused for long periods of time. This will prevent
damage to the receiver due to lightning and power-line surges.
13) Refer all servicing to qualified service personnel.  Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Upon completion of any service or repairs to this LCD TV, ask the service technician to perform routine
safety checks to determine that the television is in safe operating condition.
14) Operate only from the type of power source indicated on the marking label. If you are not sure of the
type of power supplied to your home consult your television dealer or local power company.
15) Follow all warnings and instructions marked on the LCD TV.
16) Never push objects of any kind into this LCD TV through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the LCD TV.
The lightning flash with arrow
head within a triangle is intended
to tell the user that parts inside
the product are a risk of electric
shock to persons. 
						

							3
17) If an outside antenna is connected to the
television
 equipment, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built up static
charges. In the U.S. Selection 810-21 of the
National Electrical Code provides information
with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to  an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
18) An outside antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.
19) Unplug this LCD TV from the wall outlet, and refer servicing to qualified service personnel under the
following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the LCD TV.
c. If the LCD TV has been exposed to rain or water.
d. If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore
the LCD TV to normal operation.
e. If the LCD TV has been dropped or the cabinet has been damaged.
f.  When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
20) When replacement parts are required, be sure the service technician to use replacement parts specified by
the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
21) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
22) CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG WITH A RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
23) CAUTION: USE WITH OTHER STAND MAY RESULT IN INSTABILITY CAUSING POSSIBLE INJURY.
24) CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
Important Safety Instructions
EXAMPLE OF ANTENNA
GROUNDING AS PER (NEC)
NATIONAL ELECTRICAL
CODE
GROUND
CLAMPANTENNA
LEAD-IN WIRE
ANTENNA
DISCHARGE UNIT
 
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
 (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT

 Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.
The extended use of fixed image program material can cause a permanent shadow image on the LCD panel.
This background image is viewable on normal programs in the form of a stationary fixed image. This type of
irreversible LCD panel deterioration can be limited by observing the following steps:
A.   Reduce the brightness/contrast setting to a minimum viewing level.
B.   Do not display the fixed image for extended periods of time.
C.   Turn the power off when not in actual use.

 
This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. Disposal of
these materials may be regulated in your community due to environmental considerations. For disposal or recycling
information please contact your local authorities, or the Electronics Industries Alliance: 
www.eiae.org.
NOTE: • This equipment is designed to operate in the U.S.A. and other countries where the broadcasting
system and AC house current is exactly the same as in the U.S.A.
• The marking or retained image on the LCD panel resulting from fixed image use is not an operating
defect and as such is not covered by Warranty. This product is not designed to display fixed image
patterns for extended periods of time. 
						

							4
Dear Panasonic Customer
Welcome to the Panasonic family of customers.
We hope that you will have many years of enjoyment from your new LCD TV.
To obtain maximum benefit from your set, please read these instructions before
making any adjustments, and retain them for future reference.
Retain your purchase receipt, and record the model number and serial number
of your set in the space provided on the rear cover of these instructions.
This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. If this equipment does cause or receive interference, which can be determined by
turning equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
Reorient or relocate the TV antenna.
Increase the separation between TV and other equipment.
Connect TV into separate outlet from other equipment.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : [email protected]
or visit us at www.panasonic.com                                (U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com                      (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca                                 (Canada)
Federal Communication Commission Information 
						

							5
Table of Contents
Important Safety Instructions .............................. 2
Table of Contents .................................................. 5
Installation ............................................................. 6
SUPPLIED ACCESSORIES ................................ 6
Remote control battery installation ...................... 7
Maintenance .......................................................... 7
Connections .......................................................... 8
Connecting the Antenna Cable to the Antenna Terminal ....8
Antenna cover removal and fitting ....................... 8
Antenna / Cable Connection ................................ 8
How to connect the input terminals ................... 10
Cable cover removal and fitting ......................... 12
Connecting Headphones / Earphones ............... 12
Power ON / OFF ................................................... 13
Connecting the Plug to the Wall Outlet .............. 13
How to Turn the Power On ................................ 13
Playing a VCR or other peripheral equipment ... 14
Basic Controls ..................................................... 15
Flow Chart of MENU ............................................ 16
Tuning channels
 (Automatic channel programming) .................. 18
Tuning channels
 (Manual channel programming) ........................ 19
Picture Adjustments ........................................... 20
Audio Adjustments ............................................. 21
Lock Feature ........................................................ 22
Closed Captions .................................................. 26
Customizing the VIDEO INPUT labels ............... 27
3D Y/C FILTER / COLOR MATRIX ....................... 27
ASPECT Controls ................................................ 28
Manual de instrucciones  [ Resumen ]
Preparación ................................................... 29
Instalación de las pilas del mando a distancia.....29
Conexión del cable de antena al terminal
de entrada de RF ............................................ 30
Conexión de antena / cable ............................ 30
Para quitar y colocar la cubierta del cable ...... 30
Conexión de auriculares ................................. 30
Conexión/desconexión de la alimentación ....31
Conexión de la clavija a la toma de corriente .....31
Cómo conectar la alimentación ...................... 31
Reproducción en una videograbadora o en
otro equipo periférico................................... 32
Controles básicos ......................................... 33
Organigrama de menús de televisión ......... 34
Sintonización de canales
 (Programación automática de canales) ..... 36
Sintonización de canales
(Programación manual de canales) ............ 37
Ajuste el soporte con el ángulo deseado ... 38
Para quitar y colocar la cubierta de la antena ...38
Troubleshooting .................................................. 39
Specifications ...................................................... 40 
						

							6
Installation
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For
best performance, Antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from
your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various
components require. Also determine the length of cable you’ll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed
clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.
How to use the LCD stand
Adjust the stand to your desired angle. The stand angle can be adjusted between 5 ° forward to 15 ° back.
T
H
-
1
4
L
A
1
Check the accessories before installations.
• Operating Instruction book• Remote Control Transmitter
• AC Adaptor & AC Cord• Tuner Cable Cover
SUPPLIED ACCESSORIES
• Batteries for the Remote
   Control Transmitter
   (2 × AA  size)
• Warranty Card
• Service Center List
• Customer Card
[
The illustration shows only a basic view; actual appearance may differ.] 
						

							7
 
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control
transmitter.
Observe the following precautions:
1.   Always use new batteries when replacing the old set.
2.   Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
3.   Battery replacement is necessary when remote control acts sporadically or stops operating this unit.
Notes:
• Do not drop, apply shock to or step on the remote control.
• Do not spill water on the remote control.
• Do not place objects between the remote control and remote control receiver.
• Do not use remote controls for other equipment at the same time.
• If the TV does not operate even when operating the remote control from a close range, it is time to
replace the batteries.
Refer to the label on back of the remote control for directions on replacing batteries. Requires two AA batteries.
1. Open the battery cover.2. Install the batteries as shown
in the battery compartment.
(Polarity + or – must match the
markings in the compartment).3. Replace the cover. Replacing batteries
Replace batteries by following the steps below:
Two AA size
Installation
Remote control battery installation
CAUTION :
If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction may result.
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and
water solution or a weak detergent solution.
• Use eyeglass cleaner to remove stubborn dirt from the LCD.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using a chemically treated cloth, read the instructions that came
with the cloth carefully.Mild
detergent
Maintenance 
						

							8
Connections
Connecting the Antenna Cable to the Antenna Terminal
ANT
ANT
UHF Antenna
Antenna Terminal
(ANT or VHF/UHF) VHF Antenna
Mixer
75 Ohm
Coaxial Cable
Coaxial Antenna Plug
Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best
reception an outdoor antenna is recommended. Antenna Mode must be set to TV.
Incoming 75 Ohm Cable from Home Antenna / Cable Company
Note:
Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local Cable company for its compatibility requirements.
Antenna / Cable Connection
Antenna cover removal and fitting
Removal
1
2
1.Grasp the cover at the
bottom end and initially
remove by pulling slightly
toward yourself.
2.Slowly pull out in the
downward direction.
TC-14LA1/ TC-17LA1
21
Removal1.Grasp the opening and initially
pull the cover slightly towards
yourself to disengage the
claws (at 2 points on both the
left and right).
2.Slowly pull out in the
downward direction.
TC-20LA1
ANT (VHF/UHF)
on the Back of the TVF-Type Antenna Adapter (not supplied)
Note: To avoid interference appearing on the screen, do not bundle the antenna wire and AC adapter wire together.
Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company.
Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.)
2
1
1.Insert the claws (at 4
points) at the top end.
2.Push the claws in (at 4
points) at the bottom
end.Fitting1.Insert the claws (at 4
points) at the top end.
2.Push the claws in (at 4
points) at the bottom
end.
2
1
Fitting 
						

							9
Connections
Use this configuration when connecting the TV to a cable TV system using a Cable Box.
Antenna Connection (Cable Box, no VCR)
Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR.
Antenna Connection (Cable Box, and VCR)
ANT
ANT
Connect the cable from the Output
terminal on the back of the Cable
Box to the ANTENNA terminal on
the back of the TV.CABLE BOX
TERMINALS ON THE BACK OF
THE CABLE BOX
Incoming Cable from
Antenna or Cable TV
System OUTPUT INPUT ANTENNA TERMINAL
(ANT or VHF/UHF)
ON THE BACK OF
THE TV
ANT
ANT
OUTPUT
S VIDEO
VIDEOL-AUDIO-R
Connect the
cable from the
Antenna Output
terminal on the
back of the VCR
to the Antenna
terminal (ANT or
VHF/UHF) on the
back of the TV.Connect the cable from the
Output terminal on the back
of the Cable Box to the
Antenna Input terminal on
the back of the VCR. ANTENNA TERMINAL
(ANT or VHF/UHF)
ON THE BACK OF
THE TV
VCR CABLE BOX
TERMINALS ON THE BACK OF
THE CABLE BOX
Incoming Cable from
Antenna or Cable TV
System OUTPUT INPUT
TO VCRConnect the cable from the
antenna or cable system to the
Input terminal on the back of the
CABLE BOX.
ANT OUTPUT ANT INPUT
Note: When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV
channel to CH3 or CH4, cable. This does not apply when signal is input from VIDEO INPUT. 
						

							10
How to connect the input terminals
Connections
Connect VCR and other peripheral equipment
ANTDC IN   15V
L
R AUDIO
1
INPUT VIDEO S-VIDEOL
R AUDIO
2 VIDEO S-VIDEO
L
R AUDIOCOMPORNENT VIDEO INPUTVIDEOPBYPR
L
R AUDIO
1
INPUT VIDEO S-VIDEOL
R AUDIO
2 VIDEO S-VIDEO
L
R AUDIO
COMPORNENT VIDEO INPUT
VIDEO
PB
Y
PRS-VIDEO cable
VIDEO
AUDIO
(Super-VHS VCR)(DVD/STB)
Audio
OUT RLS-Video
OUT Video
OUT
VIDEO
Pr Pb YCOMPONENT VIDEO OUT
AUDIO
Audio
OUT
LR
Connect the
 S-VIDEO or
VIDEO Terminal.
Notes:
(1) When a monaural VCR is used, connect the monaural audio cable to the AUDIO-L (Left) terminal.
(2) Similar connections are available at the INPUT terminals.
Select the desired VIDEO input position by pushing the TV/VIDEO button. (See page 14)
(3) When connecting VCRs, priority is given to the S- Video cable when the S- Video input terminal and the
video input terminal are connected at the same time.