Panasonic Lcd Tv Ct L1400 Operating Instructions

11
ANTDC IN   15V
L
R AUDIO
1
INPUT VIDEO S-VIDEOL
R AUDIO
2 VIDEO S-VIDEO
L
R AUDIOCOMPORNENT VIDEO INPUTVIDEOPBYPR
L
R AUDIO
1
INPUT VIDEO S-VIDEOL
R AUDIO
2 VIDEO S-VIDEO
L
R AUDIO
COMPORNENT VIDEO INPUT
VIDEO
PB
Y
PR
Audio
OUT LRS-Video
OUT Video
OUT
COMPONENT 
VIDEO cable VIDEO GAME CONSOLE
Audio
OUT
LR
S-VIDEO cable
VIDEO cable
AUDIO cable
COMPONENT VIDEO OUT
AUDIO
cable
VIDEO GAME CONSOLE
CAMCORDER
Connections
Connect CAMCORDER and VIDEO GAME CONSOLE
Notes:
•When connecting video cables, priority...

12
Cable cover removal and fitting
Connections
Note: Depending on the type of cable used it may not be possible to close the cover. In such cases the cable may be
routed through the antenna cover.
Connect headphones / earphones as follows.
ANTDC IN   15V
(Optional)
(M3 plug)
Use Volume Up  or Down button to control volume level. (See page 15)
Connecting Headphones / Earphones
Removal
1.Disengage the claws at the
uppermost end.
2.Slowly pull out in the
upward direction.
Fitting
1.Insert the claws (at 2...

13
Power ON / OFF
Connecting the Plug to the Wall Outlet
ANTDC IN   15V
2
21
3
Note:
• The TV and AC adaptor will still consume some power as long as the power cord is still inserted into the wall outlet.
• Be sure to use the power cord and AC adaptor included in the accessories.
• Usage of AC adapters other than specified may cause malfunctions.
How to Turn the Power On
Press the Main POWER switch on the TV to turn the set on.
POWER-ON: Green
When the set is on or in standby mode press the Main
POWER...

14
Playing a VCR or other peripheral equipment
ANTDC IN   15V
L
R AUDIO
1
INPUT VIDEO S-VIDEOL
R AUDIO
2 VIDEO S-VIDEOL
R AUDIOCOMPORNENT VIDEO INPUTVIDEOPBYPR
L
R AUDIO
1
INPUT VIDEO S-VIDEOL
R AUDIO
2 VIDEO S-VIDEO
2
3The input mode changes each time
this button is pressed.
Operate the connected equipment.
Confirming connections
Confirm that the TV is in standby
mode.
VCR
Laser Disc Player
DVD player
Turning the power on and switching input modes
This equipment can also be
connected to the rear...

15
Basic Controls
SLEEP button
The LCD TV may be preset to switch
to stand-by after a fixed period. The
setting changes to 30 minutes, 60
minutes, 90 minutes and 0 minutes
(SLEEP timer cancelled) each time
this button is pressed.
When 3 minutes remain, “ 
 3 ” will
flash. The SLEEP timer is cancelled
if a power interruption occurs.
Before the timer automatically turns
the power off, the remaining time will
blink on the screen (“3”  for 3 minutes,
“2”  for 2 minutes and “1”  for 1 minute
before the power...

16
Flow Chart of MENU
All adjustments and setting functions equipped in this set can be made u\
sing the menu buttons.
The menu screen is composed of 2 menus, the ADJUST menu and the SET UP menu.
MENUADJUSTSET  UP
LANGUAGE
PROGRAM  CH
LOCK
CLOSED  CAPTION
INPUT  LABEL
OTHER  ADJUST
MENUADJUST
PICTURE
AUDIO SET  UP
PICTURE  ADJUST
AUDIO  ADJUST
MENUADJUST
SET  UP
LANGUAGE
PROGRAM  CH
LOCK
CLOSED  CAPTION
INPUT  LABEL
OTHER  ADJUST
MENUADJUST
PICTURE
AUDIO SET  UP
PICTURE  ADJUST
AUDIO  ADJUST
MENU...

17
Flow Chart of MENU
CLOSED  CAPTION
MODEOFF
ON MUTENO
TO CLOSEDCAPTION
(See page 26)
LANGUAGE
ENGLISHLANGUAGE
TO LANGUAGE
Allows you to select the
language used for On
Screen Displays.
OFF           ONCOOLCOOL
PICTURE  ADJUST
NORMAL
PIC  MODE
BACK  LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI  PICTURE
+ 30 0
0
0
0
0
OFF      ON
STANDARD
TO PICTURE ADJUST
menu
(See page 20)
Press the RETURN
button to return to
previous screen.
Press the RETURN
button to return to
previous screen.
• To return to...

18
Tuning channels (Automatic channel programming)
Automatically scans all TV channels and stores them in memory.
Notes:
• When buttons are pressed with AUTO PROGRAM running, the TV set will return to normal viewing.
(Channels searched up to this point are added.)
• After AUTO PROGRAM is finished, the lowest channel number added will be received.
• When there are no receivable channels, channel 69 is displayed for TV and channel 125 is displayed
for cable TV.Press to select PROGRAM CH.
Press to display...

19
PROGRAM  CHANNELS
MODE
AUTO  PROGRAM
MANUAL  PROGRAM     TV    CABLE
Adding or deleting channels
MANUAL  PROGRAM
ENTER  CHANNEL
121
RETURN DELETE
CH  SELECTADD
MANUAL  PROGRAM
ENTER  CHANNEL
121
RETURN DELETE
CH  SELECTADD
Press to select MANUAL PROGRAM.
Press to display the MANUAL
PROGRAM screen.1
Press to select channel
(or number keys).2
3
Press to add channels to memory (Channel
number turns blue).
Press to delete channels from memory
(Channel number turns yellow).
4Repeat steps 2 and 3 to...

20
Item
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI PICTURE
Picture Adjustments
Press the MENU button to display the MENU screen and select ADJUST.1
2
Press to select PICTURE ADJUST.
Press to display the PICTURE
ADJUST screen.
Press to select the menu to adjust.
Select the desired level by looking at
the picture behind the menu.
NORMAL is displayed at default.
PICTURE MODE is stored for TV, VIDEO1, VIDEO2 and COMPONENT individually. PIC MODE
CINEMA VIVID STANDARD
BACK LIGHT, PICTURE,...