Panasonic LCD Projector Pt Vx42 Operating Instructions

							 fFor more information on how to use the application software “Wireless Manager ME6.2”, refer to the operating instructions of 
“Wireless Manager ME6.2”. fIt is possible to project the images which are stored in iPad / iPhone / iPod touch / Android and are sent to the projector by using the dedicated application. For more information on how to use the application software, refer to the application guide described in the following URL. [iOS support site] http://panasonic.net/avc/projector/ios/ 
[Android support site] http://panasonic.net/avc/projector/android/
[WIRELESS DETAILED SETUP]
You can configure more precise network settings, if you select [SIMPLE], [M-DIRECT] or [USER1] ~ [USER3] (user) is set to 
[NORMAL] for [WIRELESS LAN] in the network menu. For network settings, contact your network administrator.
Detailed setup of [SIMPLE]
Simple connection mode and compatible with all OS (Windows / Mac / iOS / Android etc.).
1) Press the  button when [SIMPLE] is selected.
 fThe [WIRELESS DETAILED SETUP] screen is displayed.
2) Press the  button.
 fThe [KEY] screen is displayed.
3) Press asqw to change the key according to the instructions.
[KEY]Setting a key for the access point. Input either 8 to 15 alphanumerics.
4) Press as to select [OK], and press the  button.
 rDefault setting of [SIMPLE] 
 fThe following setting is set before the projector leaves the factory.
[KEY]proj + The last 4 digits of the network ID
Detailed setup of [M-DIRECT]
Use this setting when the projector is used as a simple access point. Ev\
en if there is no access point, you can still connect the 
projector to computer via the infrastructure.  
In addition, the connection with iPad / iPhone / iPod touch / Android is much easier. 
1) Press the  button when [NORMAL] is selected.
 fThe [NORMAL] screen is displayed.
2) Press qw to select [M-DIRECT], and press the  button.
 fThe [WIRELESS DETAILED SETUP] screen is displayed.
3) Press as to select an item, and press qw to change the setting according to the instructions.
[IP ADDRESS]Enter the IP address.
[SUBNET MASK]Enter the subnet mask.
[SSID] Select M-DERECT in Wireless LAN, then the SSID can be set.
[CHANNEL]Select M-DERECT in Wireless LAN, then the Channel can be set.
1~11
[KEY]
Select M-DERECT in Wireless LAN, then the KEY can be set.  
Setting a key for the access point. Input either 8 to 63 alphanumerics or a 64 digit 
string in the hexadecimal format.
4) Press as to select [OK], and press the  button.
 rDefault setting of [M-DIRECT] 
 fThe following settings are set before the projector leaves the factory.
[IP ADDRESS]192.168.12.100
[SUBNET MASK]255.255.255.0
[SSID]M-DIRECT + The last 4 digits of the network ID
[CHANNEL]1
[KEY]The same string as the SSID
Note
 fThe authentication method is WPA2-PSK, and the encryption method is AES. Both methods are fixed. fWhen you need to change initial configuration of [M-DIRECT], please contact your network administrator .
ENGLISH - 91
Chapter 4   Settings - [NETWORK/USB] menu  
						

							 fThe initial setting is [KEY], there is a risk that the leakage of information by a third party. Change the initial setting is necessary. fAs the DHCP server is already functioning, select [ON] before connecting a computer.
Detailed setup of [USER1] / [USER2] / [USER3]
1) Press the  button when [NORMAL] is selected.
 fThe [NORMAL] screen is displayed.
2) Press qw to select [USER1], [USER2] or [USER3], and press the  button.
 fThe [WIRELESS DETAILED SETUP 1/2] screen is displayed.
3) Press as to select an item, and press qw to change the setting according to the instructions.
[NAME CHANGE]The identified names of the projectors on the application software can be changed.
[DHCP] 
ON:If a DHCP server exists in the network to which the projector is connected, the 
IP address will automatically be acquired.
OFF:If a DHCP server does not exist in the network to which the projector is 
connected, additionally set [IP ADDRESS], [SUBNET MASK ] and [DEFAULT 
GATEWAY].
[IP ADDRESS] Enter the IP address if DHCP server is not used.
[SUBNET MASK]Enter the subnet mask if DHCP server is not used.
[DEFAULT GATEWAY]Enter the gateway address if DHCP server is not used.
[DNS1]Enter the DNS server address if DHCP server is not used.
[DNS2]Enter the alternate DNS server address if DHCP server is not used.
Note
 fBefore using the DHCP server, make sure the DHCP server is already functioning.
 fFor details of IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY and DNS server address, ask the network administrator.
 fA wired LAN and wireless LAN cannot be used in the same segment.
4) Press s.
 fThe [WIRELESS DETAILED SETUP 2/2] screen is displayed.
5) Press as to select the item and press asqw to change the setting according to the instructions.
[SSID] Enter the same character string that is registered in the access point.
[AUTHENTICATION]Set the user authentication method used by the network to be connected.
[OPEN]Select when the access point authentication method is Open System.
[SHARED]Select when the access point authentication method is Shared Key.
[WPA-PSK ]Select when the access point authentication method is WPA-PSK.
[WPA2-PSK ]Select when the access point authentication method is WPA2-PSK.
[WPA-EAP/WPA2-EAP ]Select when the access point authentication method is WPA-EAP/WPA2-EAP.
[WPA-EAP]Select when the access point authentication method is WPA-EAP.
[WPA2-EAP]Select when the access point authentication method is WPA2-EAP.
[ENCRYPTION]Select the encryption method to be used for communication between the pr\
ojector and the network.
[NONE]Select when transmit without encryption.  
It is selectable only when [AUTHENTICATION] is [OPEN] or [SHARED].
[WEP]Select when Encryption is WEP.
[TKIP] 
Select when Encryption is TKIP.
Selectable when [AUTHENTICATION] is either [WPA-PSK], [WPA2-PSK],  [WPA-EAP], 
[WPA2-EAP].
[AES] 
Select when Encryption is AES.
Selectable when [AUTHENTICATION] is either [WPA-PSK], [WPA2-PSK],  [WPA-EAP], 
[WPA2-EAP].
[DEFAULT KEY]
Set 1 – 4 numerals for the default key.
It is can be set when [AUTHENTICATION] is [OPEN] or [SHARED] and [DEFAULT KEY] 
is [WEP].
92 - ENGLISH
Chapter 4   Settings - [NETWORK/USB] menu  
						

							[KEY1] - [KEY4]
Set a [WEP] key to the key number selected with [DEFAULT KEY].
It is can be set when [AUTHENTICATION] is [OPEN] or [SHARED] and [DEFAULT KEY] 
is [WEP].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input 5 alphanumerics 
(or a 10-digit string for the hexadecimal format) for the 128-bit key, input 13 
alphanumerics (or a 26-digit string for the hexadecimal format).
[KEY]
Set a key. 
It is can be set when [AUTHENTICATION] is [WPA-PSK] or [WPA2-EAP].
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
[EAP]
Select the EAP setup in the RADIUS server. 
It is can be set when [AUTHENTICATION] is [WPA-EAP/WPA2-EAP], [WPA-PSK] or 
[WPA2-EAP].
Types of EAP that can be selected are as follows.
PEAP (MS-CHAPv2), PEAP (GTC), EAP-TTLS (MD5), EAP-TTLS (MS-CHAPv2 ), 
EAP-FAST (MS-CHAPv2), EAP-FAST (GTC)
[USE NAME]
Input a user name used for authentication (excluding spaces) (maximum 64 characters).
It is can be set when [AUTHENTICATION] is [WPA-EAP/WPA2-EAP], [WPA-PSK] or 
[WPA2-EAP].
[PASSWORD]
Input a password used for authentication (maximum 64 characters).
It is can be set when [AUTHENTICATION] is [WPA-EAP/WPA2-EAP], [WPA-PSK] or
 [WPA2-EAP].
Note
 fIf you are unable to connect to the wireless LAN through the access point even after performing the steps in "Projector 
settings" (Æ page 99), contact the manufacturer of the access point (Radio repeater).
 fWhen using EAP, the projector needs to be set according to the setting of the RADIUS server. Check with the network 
administrator for the setting of the RADIUS server.
 fWhen using an EAP together with an access point with invalid SSID broadcast, select WPA-EAP or WPA2-EAP for the 
authentication method even if the authentication method of the access point is [WP A-EAP] or [WPA2-EAP]. fIf USER1 ~ 3 is used, you cannot connect to the access point of stealth SSID configuration, please use it to cancel the stealth setting. For details, please refer to the Operating Instructions of the access point.
6) Press as to select [OK], and press the  button.
 rDefault setting of [USER1], [USER2], [USER3]
 fThe following settings are set before the projector leaves the factory.
[SSID]Panasonic Projector
[DHCP]OFF
[IP ADDRESS]192.168.11.100
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]192.168.11.1
[AUTHENTICATION]OPEN
[ENCRYPTION]NULL
[DNS1] / [DNS2]NULL
[CONNECTION LOCK]
Switches the network signal or chooses one fixed signal.
1) Press as to select [CONNECTION LOCK].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]The [NETWORK/USB] input signal can be switched between [Panasonic  APPLICATION], 
[Miracast] and [MEMORY VIEWER].
[Panasonic APPLICATION]The [Panasonic APPLICATION] is the fixed [NETWORK/USB] input signal.
[Miracast]The [Miracast] is the fixed [NETWORK/USB] input signal.
[MEMORY VIEWER]The [MEMORY VIEWER] is the fixed [NETWORK/USB] input signal.
Note
 fIf [CONNECTION LOCK] is set to one fixed item other than [OFF] and you press other buttons, the [KEY  NOT APPLICABLE]  
appears. 
ENGLISH - 93
Chapter 4   Settings - [NETWORK/USB] menu  
						

							[NAME CHANGE]
You can change the projector name, for example, when using the DHCP server.
1) Press as to select [NAME CHANGE].
2) Press the  button.
 fThe [NAME CHANGE] screen is displayed.
3) Select characters with the asqw buttons and press the  button to enter the projector name. 
 fSelect [ALL DELETE] to delete all the entered characters, or press the  button on the remote control to 
delete a character on the cursor in the entry field.  
4) Select [OK] with the as buttons and press the  button. 
 fTo cancel the change of the name, select [CANCEL] and press the  button.
Note
 f[Name □□□□] (□□□□ is 4-digit number) is set before the projector leaves the factory.
[PASSWORD]
By controlling connection with password setting, it is possible to prevent an external device from accidentally connecting and 
interrupting projection images, etc.
1) Press as to select [PASSWORD].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]Disables the entry of network password.
[ON]Enables the entry of network password.
Note
 fSet to [ON] to perform password check when connecting with the projector using “Wireless Manager ME6.2”.  
(Default: [OFF])
 fWhen using the deliver image to all function or the delivered image deletion function of the “Multi Projector Monitoring & 
Control Software”, image cannot be delivered to the projector with password setting set to [ON]. To use these image delivery 
functions, set it to [OFF].
[PASSWORD CHANGE]
1) Press as to select [PASSWORD CHANGE].
2) Press the  button.
 fThe [PASSWORD CHANGE] screen is displayed.
3) Press asqw to set the password.
4) Press as to select [OK], and press the  button.
Note
 fYou can enter 8 characters at most.
 fChange the password periodically that is hard to guess.
[NETWORK CONTROL]
Set when you want to control the projector from a computer connected to the network.
1) Press as to select [NETWORK CONTROL].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]This function is disabled.
[ON]This function is enabled. WEB control, PJLink control, the command control of the LAN are 
enabled.
[AMX D. D.]
Set to [ON] to control with the controller of AMX Corporation.
Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer to the website of AMX 
Corporation.
URL http://www.amx.com/
94 - ENGLISH
Chapter 4   Settings - [NETWORK/USB] menu  
						

							1) Press as to select [AMX D. D.].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]This function is disabled.
[ON]This function is enabled.
[Crestron Connected(TM)]
Set to [ON] to control with Crestron Connected™ of Crestron Electronics, Inc.
1) Press as to select [Crestron Connected(TM)].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]This function is disabled.
[ON]This function is enabled.
[EXTRON XTP]
Set to [ON] when connecting the “XTP transmitter” of Extron Electronics to the  terminal.
Set to [OFF] If you want to connect to the optional Digital Interface Box (Model No.: ET-YFB100G).
For details of the “XTP transmitter”, refer to the website of Extron Electronics.
URL http://www.extron.com/
1) Press as to select [EXTRON XTP].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]This function is disabled.
[ON]This function is enabled.
[DIGITAL INTERFACE BOX]
When the optional Digital Interface Box (Model No.: ET-YFB100G) is connected to the  terminal, the 
main menu of ET-YFB100G is displayed. Refer to the Operating Instructions of ET -YFB100G for details.
Note
 fWhen [EXTRON XTP] is set to [ON], [DIGITAL INTERFACE BOX] cannot be selected.
[LIVE MODE CUT IN]
Set this [ON] to allow interrupt of the Live mode by other users, or to allow delivery of images by the “Multi Projector Monitoring 
& Control Software”, while the Live mode is active (sending image) by the “Wireless Manager ME6.2”.
1) Press as to select [LIVE MODE CUT IN].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]This function is disabled.
[ON]This function is enabled.
Note
 fIf you use the “Wireless Manager ME6.2” and the “Multi Projector Monitoring & Control Software” on the same computer at 
the same time, the function of delivering image to all may not be availa\
ble. If you want to use them at the same time, please 
use another computer with respective software.
[MULTI-LIVE]
Switch to the Multi-live mode when using the “Wireless Manager ME6.2”. For details, refer to "Wireless Manager ME6.2" 
operating instructions. You can also use the application that is used for iOS or Android.
1) Press as to select [MULTI-LIVE].
2) Press the  button.
 fTo switch the multi mode.
ENGLISH - 95
Chapter 4   Settings - [NETWORK/USB] menu  
						

							 fThe items will switch each time you press the button. 
4-screen multi style → 4-screen index style → 16-screen index style  → 4-screen multi style →...
[MEMORY VIEWER]
Change the setting of MEMORY VIEWER.
1) Press as to select [MEMORY VIEWER].
2) Press the  button.
 fThe [MEMORY VIEWER] screen is displayed.
3) Press as to select one item, and press qw to set the selected item.
 fThe items will switch each time you press the button.
[VIEW]Sets the display method of MEMORY VIEWER screen.
[THUMBNAIL]Displays in the [THUMBNAIL] display method.
[LIST]Displays in the [LIST] display method.
[SORT]Sets the display order of the files in the memory viewer screen.
[NAME]Displays in ascending order of the file name.
[TYPE]Displays in each type of file.
[TIME]Displays in reverse chronological order of date and time of the update file.
[AUTOPLAY]Enables / disables the auto play function.
[OFF]Disables the auto play function.
[ON]Enables the auto play function.
[INTERVAL]Sets the display time of still images of automatic playing.
[5 S] ~ [120 S]Sets the display time of still images.
It can be set to [5 S], [10 S], [15 S], [30 S], [60 S] or [120 S].
[EFFECT]Sets the special effects to be used for playback screen upon conversion of the still image.\
[OFF]It does not apply the special effects.
[RANDOM]Applies to the random special effects.
[WIPE LEFT]Displays gradually to wipe from the left side.
[WIPE RIGHT]Displays gradually to wipe from the right side.
[WIPE DOWN]Displays gradually to wipe from the top.
[SPLIT]Displays gradually to wipe towards the left and right sides from the cen\
ter.
[ZOOM OUT]Displays gradually from the center to the whole.
[FADE]Displays the whole gradually.
[BLIND]Displays gradually to open a vertical blind.
[CHECKER WIPE]Displays gradually to the right from the left side in a grid pattern.
[SLIDE IN]Displays the next screen to appear from right to left.
[SLIDE OUT]Disappears the previous screen from right to left, then displays the next screen.
[GUIDE]It is set to [ON] when the guide is displayed.
[ON]Select to display operations guide and time bar (only for video playback) in full screen 
during playback.
[OFF]Select if you do not want to display the time bar and operations guide.
Note
 fFor details about [MEMORY VIEWER], refer to "Memory Viewer Function". (Æ page 119) 
 fWhen the [AUTOPLAY] is set to [OFF], the [INTERVAL] cannot be set.
 fIf you change the settings in the [INTERVAL] or [EFFECT] during playback of a MEMORY VIEWER, it does not affect the 
projected image during playback. Please re-play it back to the MEMORY VIEW screen in the [THUMBNAIL] display method 
or [LIST] display method. For information on how to use MEMORY VIEW function, refer to “Memory Viewer Function”.  
(Æ page 119 ) 
 fWhen the [GUIDE] is set to [ON], the operation guide and timer bar will automatically disappear after about 3 seconds. 
 fPress asqw or the  button in a still image during playback, the operation g\
uide will appear;  press aqw or the 
 button in a video during playback, the operation guide and timer\
 bar will appear.
[VueMagic(TM)]
You can switch to the idle screen of the still image transfer application software “ VueMagic” corresponding to the iOS device 
and Android device. Login password (a four-digit number that is automatically generated) , projector name, IP address are 
displayed in the idle screen.
96 - ENGLISH
Chapter 4   Settings - [NETWORK/USB] menu  
						

							1) Press as to select [VueMagic(TM)].
2) Press qw to display the VueMagic idle screen.
 fThe VueMagic idle screen is displayed.
Note
 fWhen using the VueMagic application, the projector settings are required to set [USER1] ~ [USER3] as mode of wireless 
LAN. For more information, please refer to  “Detailed setup of [USER1] / [USER2] / [USER3]” (x page 92).
 fFor information about working with VueMagic application, refer to the Operating Instructions of your device.
 fWhen the input is switched or the  button is pressed, the [VueMagic(TM)] will switch to [OFF] automatically.
 fWhen you are viewing a VueMagic idle screen, MENU screen cannot be displayed.
 fWhen connecting to the iOS device or Android device, you must install the dedicated application “VueMagic” to the device. 
For detailed information, refer to the following web site. (Only in English.) 
URL http://vuemagic.pixelworks.com
[STATUS]
Displays the current network status.
1) Press as to select [STATUS].
2) Press the  button.
 fThe [STATUS] screen (WIRED LAN 1/3) is displayed.
3) Press as to switch between the screen (WIRED LAN 1/3 → WIRELESS LAN 2/3 → WIRELESS LAN 3/3).
 fThe page will switch each time you press the button.
[WIRED LAN]Displays the network information of the wired LAN that set on the projec\
tor.
[DHCP]Displays the usage state of the DHCP server.
[IP ADDRESS]Displays the IP address.
[SUBNET MASK]Displays the subnet mask.
[DEFAULT GATEWAY]Displays the default gateway.
[DNS1]Displays the address of the primary DNS server.
[DNS2]Displays the address of the secondary DNS server.
[MAC ADDRESS]Displays the MAC address of wired LAN.
[WIRELESS LAN]Displays the network information of the wireless LAN that set on the pro\
jector.
[ANTENNA LEVEL]Displays the radio wave state of the wireless LAN.
[NETWORK]Displays the connection method of the wireless LAN.
[SSID]Displays the character string of SSID.
[AUTHENTICATION]Displays the user authentication method.
[EAP]Displays the type of EAP.
[ENCRYPTION]Displays the encryption method.
[DEFAULT KEY]Displays the number of the default key.
[DHCP]Displays the usage state of the DHCP server.
[IP ADDRESS]Displays the IP address.
[SUBNET MASK]Displays the subnet mask.
[DEFAULT GATEWAY]Displays the default gateway.
[DNS1]Displays the address of the primary DNS server.
[DNS2]Displays the address of the secondary DNS server.
[MAC ADDRESS]Displays the MAC address of wireless LAN.
Note
 fWhen [WIRELESS LAN] is set to [DISABLE], the [STATUS] screen of the wireless LAN will not be displayed.
[INITIALIZE]
This function is used to return various setting values of [NETWORK/USB] to the factory default value.
1) Press as to select [INITIALIZE].
2) Press the  button.
 fThe [INITIALIZE] screen is displayed.
3) Press qw to select [OK] and then press the  button.
ENGLISH - 97
Chapter 4   Settings - [NETWORK/USB] menu  
						

							Network connections
The projector has a network function, and the following operations are a\
vailable from the computer using the web browser 
control.
 fSetting and adjustment of the projector.
 fDisplay of the projector status.
 fTransmission of an E-mail message when there is a problem with the projector.
The projector supports "Crestron Connected™", and the following application software of Crestron Electronics, Inc. can be 
used.
 fRoomView Express
 fFusion RV
 fRoomView Server Edition
Note
 f"Crestron Connected™" is a system developed by Crestron Electronics, Inc. which collectively manage and control multiple 
system devices connected via the network, from a computer. This projector supports "Crestron Connected™".
 fFor details of "Crestron Connected™", please refer to the website of Crestron Electronics, Inc.. (Only in English) 
http://www.crestron.com/ 
For the download of "RoomView Express", please refer to the website of Crestron Electronics, Inc.. (Only in English) 
http://www.crestron.com/getroomview
Computer that can be used
In order to use the Web control function, a Web browser is required. Confirm that the Web browser can be used beforehand.
OSCompatible web browser
Windows Internet Explorer 7.0 / 8.0 / 9.0 / 10.0 / 11.0
Mac OSSafari 4.0 / 5.0 / 6.0 / 7.0
Note
 fCommunication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used 
beforehand.
Connecting with Wired LAN
Example of a normal network connection
ComputerProjector
LAN cable (straight) LAN cable (straight)
Hub
Attention
 fWhen a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
 fA LAN cable is required to use the wired LAN function.
 fUse shielded LAN cable (STP cable) that is compatible with category 5 or above.
 fUse a LAN cable with length of 100 m or shorter.
98 - ENGLISH
Chapter 4   Settings - [NETWORK/USB] menu  
						

							Example of network connections via a twisted-pair-cable transmitter
The projector has a function that can receive Ethernet signals from a twisted-pair-cable transmitter together with video and 
audio signals via a LAN cable. Connect a LAN cable to the  terminal of the projector. (x page 27)
Computer
Projector
LAN cable (straight) LAN cable (straight)
Hub LAN cable (straight)
Twisted-pair-cable transmitter
Note
 fFor the LAN cable between a twisted-pair-cable transmitter and the projector , use a cable that meets the following criteria:
 gCompatible with CAT5e or higher
 gShielded type (including connectors)
 gStraight-through
 gSingle wire
 fThe maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100 m (328’1”). If this 
distance is exceeded, image and sound may be disrupted and may cause a malfunction in LAN communication.
 fWhen laying cables between a twisted-pair-cable transmitter and the projector , check that cable characteristics are 
compatible with CAT5e or higher using tools such as a cable tester or cable analyzer.
When using a relay connector midway, include it in the measurement.
 fDo not use a hub between a twisted-pair-cable transmitter and the projector.
 fDo not pull cables forcefully. Also, do not bend or fold cables unnecessarily.
 fTo reduce the effects of noise as much as possible, stretch out the cables between the twisted-pair-cable transmitter and the 
projector without any loops.
 fLay the cables between a twisted-pair-cable transmitter and the projector away from other cables, particularly power cables.
 fWhen installing multiple cables, run them side by side along the shortest distance possible without bundling them together .
 fAfter laying the cables, confirm that the value of [SIGNAL QUALITY] in the [NETWORK/USB] menu → [DIGITAL LINK 
STATUS] is displayed in green (indicates normal quality). (x page 89)
 fFor twisted-pair-cable transmitter of other manufacturers of which the operation has been verified with the DIGITAL LINK 
compatible projector, refer to Panasonic website (http://panasonic.net/avc/projector/). Note that the verification for devices 
of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been 
verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective 
manufacturers.
Projector settings
1) Use the LAN cable to connect the projector with computer.
2) Turn on the projector.
3) Press the  button to display the [NETWORK/USB] menu, and then select [WIRED LAN], and 
press the  button.
4) Set the detailed setup of [WIRED LAN].
 fFor details, refer to “WIRED LAN”. (Æ page 89) 
Note
 fPlease confirm with your network administrator before you connect to an existing network. fThe following settings are set before the projector leaves the factory.
[DHCP]OFF
[IP ADDRESS]192.168.10.100
[SUBNET MASK]255.255.255.0
ENGLISH - 99
Chapter 4   Settings - [NETWORK/USB] menu  
						

							[DEFAULT GATEWAY]192.168.10.1
[DNS1] / [DNS2]NULL
Computer setting
1) Turn on the computer.
2) Make the network setting according to your system administrator.
 fIf the projector settings are the default settings, the computer can be \
used with the following network settings.
[IP ADDRESS]192.168.10.101
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]192.168.10.1
Connecting with Wireless LAN
Example of connection
IEEE802.11a/b/g/n
Example of connection for image transfer
MiracastImage transfer application software
Connection image
 Projector
Miracast
Miracast-certified device
(Example) Copyright protection content display Projector
(Example) Multi-screen display
iPad/iPhone/iPod touch, Android mobile terminal and computer  which are installed with the image transfer application software
InputMiracastPanasonic APPLICATION
Communication methodIEEE802.11n a/nIEEE802.11n b/g/n
Connection methodWPS + Wi-Fi DirectPanasonic proprietary + User connections
Video transmission 
methodMiracastPanasonic proprietary
100 - ENGLISH
Chapter 4   Settings - [NETWORK/USB] menu