Panasonic LCD Projector Pt Vw431d Operating Instructions

Information
ENGLISH - 61
Settings
Select [Information] from the Main Menu (see 
“Navigating through the menu” on page 37).
Remote ControlControl Panel
Input Source Information 
Display 
The Information Menu is used for checking the status 
of the image signal being projected and the operation 
of the projector.
You can also Press the  button on the remote 
control to display the Information menu.
Press ◄► to switch between page 1 and 
page 2.
Input J
The selected input source is displayed.
System J
The...

62 - ENGLISH
Settings
Network
Select [Network] from the Main Menu (see 
“Navigating through the menu” on page 37), 
then select the item from the sub-menu.
Remote ControlControl Panel
DIGITAL LINK mode
You can switch the DIGITAL LINK function mode 
among Auto, DIGITAL LINK and Ethernet.
Press ▲▼ to select [DIGITAL LINK 1 ) 
mode].
Press  button and press ▲▼ 2 ) 
to select items. 
Auto 
To select the automatically 
response communication 
method.
DIGITAL LINKTo select the DIGITAL LINK.
EthernetTo select...

Network
ENGLISH - 63
Settings
DHCP (DHCP client 
function)
On:If a DHCP server 
exists in the 
network to which 
the projector is 
connected, the 
IP address will 
automatically be 
acquired.
Off:If a DHCP 
server does 
not exist in the 
network to which 
the projector 
is connected, 
additionally set 
[IP address], 
[Subnet mask 
] and [ Default 
gateway ].
IP address (Displaying and setting the IP address)
Enter the IP address 
if DHCP server is not 
used.
Subnet mask(Displaying and setting the subnet...

Network
64 - ENGLISH
Settings
Network control
Set when you want to control the projector from a 
computer connected to the network.
Press ▲▼ to select [Network control].1 ) 
Press  button to select [On] 2 ) 
or [Off] with the ▲▼ buttons.
Network status
This function shows the LAN setting environment of 
the currently selected projector.
Press ▲▼ to select [Network status].1 ) 
Press  button or the ► button 2 ) 
to show the information of the current 
projector status.
AMX D.D.
This function allows the...

Network
ENGLISH - 65
Settings
Network connections
The projector has a network function, and the following operations are a\
vailable from the computer using the web 
browser control.
Setting and adjustment of the projector. z
Display of the projector status. z
Transmission of an E-mail message when there is a problem with the projec\
tor. z
Note
A LAN cable is required to use the network function. z
 Notes on LAN network connections
A Web browser is required to use this function. Confirm that the Web...

Network
66 - ENGLISH
Settings
ComputerProjector
Network connection example for Twisted pair cable Extender 
LAN cable (straight)
LAN cable (straight)
Twisted pair cable Extender
LAN cable (straight)
Hub
Notes on Twisted pair cable Extender connections
 Request the specialized technician or your dealer for wiring work of the cable for DIGITAL LINK. If the work is  z
not properly conducted, the cable transmission characteristics do not me\
et, and the images and sounds may 
be interrupted or become...

Network
ENGLISH - 67
Settings
Computer operation
Connection can be made with wired LAN. However, confirm to your system administrator on network settings 
before changing any settings.
Turn on the computer.1 ) 
Make the network setting according to your system administrator.2 ) 
If the projector settings are the default settings (Æpage 63), the computer can be used with the following 
network settings.
DHCPOff
IP address1 9 2 .1 6 8 .1 0 .1 0 1
Subnet mask255.255.255.0
Default gateway1 9 2 .1 6 8 .1 0...

Network
68 - ENGLISH
Settings
Description of each item  J
1 Page selection tabs
  Click these to switch pages.
2 Monitor information button 
Click this item, and the status of the projector is 
displayed.
3 Projector control button 
Click this item to display the projector control 
page.
4 Detailed set up button 
Click this item to display the advanced settings 
page.
5 Change password button
  Click this button to display the password change 
page.
6  CRESTRON RoomView button
 Click this button to...

Network
ENGLISH - 69
Settings
Error information page  J
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, 
click the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.• 
When [FAILED] has appeared for an item
ParameterDescription
FA NTrouble has occurred in the fan or its drive circuit. Consult your dealer.
INTAKE AIR TEMPER...

Network
70 - ENGLISH
Settings
Basic control page  J
To move from another page, click [Projector control], then [Basic control].
1 Power standby/on control
2 Use these to select the input signals
3 Volume adjust
4 Switches image mode
5 Operation of AV mute
5
4
3
2
1
Detail control page J
Click [Projector control], then [Advanced control] to display the Detail control page.
1 Execute Auto setup function
2 Operations on Screen mode
3  Operations on Keystone function
4 Operations on Rear/Ceiling
5 Operations...