Panasonic LCD Projector Pt Vw431d Operating Instructions

ENGLISH - 51
Settings
Ceiling
This function is used to project the image from a 
ceiling-mounted projector.
Press ▲▼ to select [Ceiling] and then 1 ) 
press the  button.
Press ▲▼ to change the image.2 ) 
When this function is set to [On], the picture will  z
be top/bottom and left/right reversed.
Rear
This function is used to project the image from rear of 
the screen.
Press ▲▼ to select [Rear] and then 1 ) 
press the  button.
Press ▲▼ to change the image.2 ) 
When this function is set to [On], the...

Sound
52 - ENGLISH
Settings
Sound
Select [Sound] from the Main Menu (see 
“Navigating through the menu” on page 37), 
then select the item from the sub-menu.
Remote ControlControl Panel
Volume
Press ▲▼ to select [Volume] and then 1 ) 
press the  button.
Press ◄► to adjust the volume.2 ) 
Press  button to set the volume. z
OperationAdjustmentAdjustment 
range
Press ►.turn up the 
volume
Maximum 
value 63
Press ◄.turn down the 
volume
Minimum 
value 0
You can press  buttons on the  z
remote control to...

Setting
ENGLISH - 53
Settings
Setting
Select [Setting] from the Main Menu (see 
“Navigating through the menu” on page 37), 
then select the item from the sub-menu.
Remote ControlControl Panel
Language
Press ▲▼ to select [Language].1 ) 
Press ► or the  button.2 ) 
Press ▲▼ to select the desired 3 ) 
language.
The language used in the On-Screen Menu is  z
available in English, German, French, Italian, 
Spanish, Portuguese, Dutch, Swedish, Finnish, 
Norwegian, Danish,  Polish, Hungarian, Romanian, 
Czech,...

Setting
54 - ENGLISH
Settings
Background
Select the background screen for when no input signal 
is detected.
Press ▲▼ to select [Background].1 ) 
Press the  button.2 ) 
Press ▲▼ to switch each option as 3 ) 
below.
BlueBlue colored background.
UserThe logo transferred by "Logo
Transfer Software *1 " is projected.
BlackBlack colored background.
" Logo Transfer Software" is included on the *1 : 
supplied CD-ROM.
Display
This function decides whether to display On-Screen 
Displays.
Press ▲▼...

Setting
ENGLISH - 55
Settings
Press ▲▼ to enter the current code, 2 ) 
press the ► button to fix the number 
and move the red frame pointer to the 
next box.
The New Logo PIN code input dialog box  z
appears. 
Repeat this step to set the new Logo 3 ) 
PIN code.
Attention
Be sure to note the new Logo PIN code and keep it on  z
hand. If you lost the number, you could no longer change 
the Logo PIN code setting.
HDMI setup
This function is only used for HDMI input source.
Press ▲▼ to select [HDMI setup].1 )...

Setting
56 - ENGLISH
Settings
OffPower management function is off.
Ready
When the lamp has been fully cooled 
down, the  
indicator changes to green blinking. 
In this condition, the projection lamp 
will be turned on if the input signal 
is reconnected or any button on the 
control panel or remote control is 
pressed.
Shut 
down
When the lamp has been fully cooled 
down, the power will be turned off.
Timer J
Press ▲▼ to select [Timer] and then 1 ) 
press the  button.
Press ▲▼ to set the Timer(1~30...

Setting
ENGLISH - 57
Settings
Count up"000:00"
Count downTimer that you set
Note
To stop the P-timer function, press the   z
button.
To cancel the [P-timer], press and hold the   z
button for a few seconds.
Closed caption
[Only for NTSC, 480i input]
Press ▲▼ to select [Closed caption].1 ) 
Press ► or the  button to 2 ) 
enter the submenu.
Closed caption J
Press ▲▼ to select [Closed caption] 1 ) 
and then press the  button.
Press ▲▼ to select [Off], [CC1], [CC2], 2 ) 
[CC3] or [CC4].
Color J
Press...

58 - ENGLISH
Settings
Setting
Press ▲▼ to select the desired items 1 ) 
as below.
Unlocked.
Lock the operation of the control panel. To unlock, use the remote control.
Lock the operation of the remote control. To unlock, use the control panel.
PIN code lock J
This function prevents the projector from being 
operated by unauthorized persons and provides the 
following setting options for security.
Press ▲▼ to select the desired items 1 ) 
as below.
OffUnlocked.
On 1Enter the PIN code every time 
turning...

Setting
ENGLISH - 59
Settings
Video delay control
This function allows you to make a digital processing 
of a projected image faster.
Press ▲▼ to select [Video delay 1 ) 
control] and then press the  
button.
Press ▲▼ to select one item between 2 ) 
[On] and [Off].
Note
[Noise reduction] and [Progressive] can not be  z
selected when Video delay control function is set to 
[On].
Filter counter
This function is used to set a frequency for the filter 
replacement.
Press ▲▼ to select [Filter counter].1 )...

Setting
60 - ENGLISH
Settings
RS232C
Switch the sending and receiving port of the serial 
command.
Press ▲▼ to select [RS232C] and then 1 ) 
press the  button.
Press ▲▼ to switch the item.2 ) 
Serial For the projector SERIAL IN 
terminal.
DIGITAL LINK
For the Digital Interface Box 
SERIAL IN terminal (Optional 
accessory: ET-YFB100G).
 
Note
When [DIGITAL LINK] is selected, the signal can  z
only be transmitted when connects the  jack of the projector to the SERIAL terminal 
of the connected equipment,...