Panasonic LCD Projector Pt Vw330 Operating Instructions

Sound
ENGLISH - 51
Settings
Select [Sound] from the Main Menu (see 
“Navigating through the menu” on page 36), 
then select the item from the sub-menu.
Remote ControlControl Panel
Volume
Press ▲▼ to select [Volume] and then 1 ) 
Press the  button.
Press ◄► to adjust the volume.2 ) 
OperationAdjustmentAdjustment 
range
Press ►.turn up the 
volume
Maximum 
value 63
Press ◄.turn down the 
volume
Minimum 
value 0
You can also press  (+/-) buttons on  z
the remote control or control panel to adjust the...

Setting
52 - ENGLISH
Settings
Select [Setting] from the Main Menu (see 
“Navigating through the menu” on page 36), 
then select the item from the sub-menu.
Remote ControlControl Panel
Language
Press ▲▼ to select [Language].1 ) 
Press ► or the  button.2 ) 
Press ▲▼ to select the desired 3 ) 
language.
The language used in the On-Screen Menu is  z
available in English, German, French, Italian, 
Spanish, Portuguese, Dutch, Swedish, Finnish, 
Norwegian, Danish, Polish, Hungarian, Romanian, 
Czech, Russian,...

Setting
ENGLISH - 53
Settings
Auto keystone J
AutoAlways works and corrects keystone 
distortion according to the projector's tilt.
ManualWorks only when pressing the  button on the remote control or the 
 button on the control 
panel. 
OffDisables Auto Keystone.
Note
[Input search], [Auto PC adj.] and [Auto Keystone] cannot  z
be set [Off] at the same time.
The [Auto Keystone] function cannot work when the  z
[Ceiling] feature is set [On] in the Setting menu.
Background
Select the background screen...

Setting
54 - ENGLISH
Settings
Logo PIN code change J
Logo PIN code can be changed to your desired four-
digit number.
Press ▲▼ to select [Logo PIN code 1 ) 
change].
Press the  button.2 ) 
Current logo PIN code dialog box appears. z
Press ▲▼ to enter the current code.3 ) 
The New Logo PIN code input dialog box  z
appears. Set a new Logo PIN code, a 
confirmation box appears, choose Yes to set 
the new Logo PIN code.
Attention
Be sure to note the new Logo PIN code and keep it on  z
hand. If you lost the...

Setting
ENGLISH - 55
Settings
Subpicture size J
Press ▲▼ to select [Subpicture size] 1 ) 
and then press the  button.
Press ▲▼ to select one among the 2 ) 
items as below.
You can change the subpicture size among  z
Small, Middle and Large.
Subpicture position J
Press ▲▼ to select [Subpicture 1 ) 
position] and then press the  
button.
Press ▲▼ to select one among the 2 ) 
positions as below.
You can adjust the subpicture position. (the  z
bottom right, the top right, the top left and the 
bottom left)....

Setting
56 - ENGLISH
Settings
P-timer
This function allows you to change the setting of the 
P-timer and execute it.
Press ▲▼ to select [P-timer].1 ) 
Press ► or  button to 2 ) 
access the submenu.
Mode J
Press ▲▼ button to select one mode 1 ) 
among the items as below.
Count up
The P-timer display 000:00 appears 
on the screen and the count up 
starts (000:00-180:00)
Count downThe time set in the Timer setting 
appears on the screen and the 
countdown starts.
Timer J
Press ▲▼ to select [Timer] and then...

ENGLISH - 57
Settings
Lamp power
This function allows you to change brightness of the 
screen.
Press ▲▼ to select [Lamp power] and 1 ) 
then press the  button.
Press ▲▼ to select one among the 2 ) 
modes as below.
You can also press the  button to  z
display [Lamp power].
AutoBrightness according to the input
signal. 
    NormalThe lamp power output is 
maximum.
Eco1The lamp power output is 70% 
of the Normal mode.
Eco2The lamp power output is 53% 
of the Normal mode.
Remote control
This switching...

Setting
58 - ENGLISH
Settings
PIN code change J
The PIN code can be changed to your desired four-
digit number.
Press ▲▼ to select [PIN code change] 1 ) 
and then Press  button.
Current Pin code dialog box appears. z
Press ▲▼ to enter the current code. 2 ) 
Press ► button to fix the number and 
move the red frame pointer to the next 
box. 
The New PIN code input dialog box appears. z
Repeat these steps to set a new PIN 3 ) 
code.
Fan 
Press ▲▼ to select [Fan] and then 1 ) 
Press  button.
Press ▲▼ to...

Setting
ENGLISH - 59
Settings
Press ▲▼ to set the Timer.2 ) 
Select from [Off/1000H/2000H/3000H/4000H/  z
5000H/6000H] depending on the use 
environment.
Filter counter reset J
After replacing the filter, be sure to reset the timer.
Press ▲▼ to select [Filter counter 1 ) 
reset].
Press the  button. 2 ) 
[Filter counter Reset?] appears. Select [Yes]  z
to continue. Another confirmation dialog 
box appears, select [Yes] to reset the [Filter 
counter].
Total power savings
This function displays the saved...

Information
60 - ENGLISH
Settings
Select [Information] from the Main Menu (see 
“Navigating through the menu” on page 36), 
then select the item from the sub-menu.
Remote ControlControl Panel
Input Source Information 
Display 
The Information Menu is used for checking the status of 
the image signal being projected and the operation of 
the projector.
You can also Press the  button on the remote 
control to display the Information menu.
Input J
The selected input source is displayed.
System J
The...