Panasonic LCD Projector Pt Vw330 Operating Instructions

ENGLISH - 11
Important 
 
Information
Preparation
Getting Started
Basic Operation
Settings
Maintenance
Appendix
Image 1-4 .....................................................................44
Image adjust.............................................45
Contrast ........................................................................45
Brightness  ....................................................................45
Color ...........................................................................\
..45...

12 - ENGLISH
Important 
 
Information
Precautions for Use
Cautions when transporting
When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impac\
ts.  z
Doing so may damage the internal parts and result in malfunctions.
Do not transport the projector with the adjustable feet extended. Doing \
so may damage the adjustable feet. z
Cautions when installing
Do not set up the projector outdoors. J
The projector is designed for indoor use only.  z
Do not use under...

Precautions for Use
ENGLISH - 13
Important 
 
Information
Cautions when setting the projectors J
 zDo not stack the projectors.
Do not block the ventilation ports (intake and exhaust) of the  z
projector.
Avoid heating and cooling air from the air conditioning system  z
directly blow to the ventilation ports (intake and exhaust) of the 
projector.
Do not place the projector in an enclosed space.  z
If you need to place the projector in an enclosed space, additional air \
conditioning and ventilation...

Precautions for Use
14 - ENGLISH
Important 
 
InformationCautions on use
In order to get the picture quality J
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light  z
from indoor lamps from shining onto the screen.
Depending on where the projector is used, heated air from an exhaust por\
t or warm or cold air from an air  z
conditioner can cause a shimmering effect on screen. 
Avoid use in locations where exhaust or streams of air from projector,...

Precautions for Use
ENGLISH - 15
Important 
 
Information
Accessories
Make sure the following accessories are provided with your projector. Numbers in the brackets ( ) show the 
number of accessories.
Remote control unit (x1)
(6451048745)
(6451048738)
Power cord (x1)
(6103580197)
CD-ROM (x1)
(6103591056)
Batteries (AAA/R03 type) 
(x2)
PT-VW330UPT-VX400U
(for remote control unit)
RGB signal cable (x1)
( 6103580425)
Filter cover (x1)
(6103568881)  
AC power cord holder 
(x1) (6103573700)...

Precautions for Use
16 - ENGLISH
Important 
 
InformationContents of the supplied  JCD-ROM
The contents of the supplied CD-ROM are as follow. [: Instructions/List (PDF), : Software]
Operating Instructions – Projector Operations.
Operating Instructions – Network Operations.
 
Multi Projector Monitoring & Control Software 2.6(Windows)
This software allows you to monitor and control multiple projectors conn\
ected to the LAN.• 
 
Operation Manual Multi Projector Monitoring & Control Software 2.6
Logo...

ENGLISH - 17
Preparation
About Your Projector
Remote control
  * Button is only for PT-VW330U.
(1)  Button
Execute the setting of Auto setup in the setting 
menu. (Æpage 52)
(2) Input Selection Buttons: , , , , 
, . 
These buttons are used to select the input signal. 
(Æpage 32)
(3) ▲▼◄► Buttons,  Button
Navigate the MENU display. (Æpage 36)
(4)  Button
Select a screen mode. (Æpage 48)
(5)  Button
Open or close the On-Screen Menu. (Æpage 36)
(6)  Button
     Pauses the projected image and sound...

About Your Projector
18 - ENGLISH
Preparation
(1) Remote control signal receiver
(2) Focus Ring
Adjusts the focus.
(3) Projection Lens 
(4) Zoom Lever
Adjusts the zoom.
(5) Air intake port 
(6) Control Panel and Indicators (Æpage 19)
(7) Lamp cover (Æpage 65)
     The lamp unit is located inside.
(8) Air outlet port
Hot air is exhausted from the exhaust vent. Do • 
not put heat-sensitive objects near this side.
(9) Speaker
(10) AC IN
(11) Terminals (Æpage 19)
(12) Air intake port / Air filter cover...

About Your Projector
ENGLISH - 19
Preparation
Rear terminals
Control panel 
(1) LAN
Connects to a LAN cable for network connection.
(2) HDMI
Connects to HDMI input signals.
(3) COMPUTER IN 1/ COMPONENT IN
Connects to COMPUTER IN 1/ COMPONENT IN 
input signals.
(4) COMPUTER IN 2/ MONITOR OUT
Connects to COMPUTER IN 2/ MONITOR OUT 
input signals or outputs the analog RGB signals 
input the projector.
(5) AUDIO OUT (VARIABLE)
     Outputs the audio signals input to the projector.
(6) Security slot
Attach...

Using Remote control
20 - ENGLISH
Preparation
Using Remote control
Installing and removing batteries
Open the cover1 ) Install batteries and close the cover2 ) 
(Insert the – side first.)
Remove the batteries in the reverse order of  z
installation. 
Setting Remote control ID numbers
When you use the system with multiple projectors, you can operate all th\
e projectors simultaneously or each 
projector individually using single remote control, if unique ID number is assigned to each projector.
After...