Panasonic LCD Projector Pt Tw342 Operating Instructions

							ENGLISH - 81
Projector settings
1)  Use the LAN cable (Straight) to connect the projector with computer.
2)  Turn on the projector.
3)  Set the [Expand] menu → [Network] → [Network setting]. 
 
f For details, refer to the [Expand] menu → [Network] (x page 69).
Note
 
f Please confirm with your network administrator before you connect to an existing network.
 
f The following settings are set before the projector leaves the factory.
[DHCP] Off
[IP address] 192.168.1.100
[Subnet] 255.255.255.0
[Gateway] 192.168.1.1
[DNS] 192.168.1.1
Computer setting
Connection can be made with wired LAN. However, confirm to your system administrator on network settings before chang -
ing any settings.
1)   Turn on the computer.
2)  Make the network setting according to your system administrator.
 
f If the projector settings are the default settings, the computer can be \
used with the following network settings.
[IP address] 192.168.1.101
[Subnet] 255.255.255.0
[Gateway] 192.168.1.1
When connecting via wireless LAN
The wireless module (Model No.: ET-WML100) of the optional accessories is required if you want to use the network function 
through the wireless LAN.
 
f Only one projector can be connected with the wireless LAN.
Connection example
IEEE802.11b/g/n
Wireless module of optional accessories
(Model No.: ET-WML100)
Preparation and confirmation of the projector
1)  Turn on the projector.
2)  Insert the wireless module (Model No.: ET-WML100) of optional accessories firmly into the  terminal.
LED
Wireless module of optional accessories
(Model No.: ET-WML100)
Chapter 5   Operation of Function - Network connection  
						

							82 - ENGLISH
3) Press the  button on the remote control to switch to 
[Network] input.
 
f The network input idle screen is displayed. The login password (a four-digit number that is automatically generated), 
projector name: PROJECTOR (fixed), IP address (Wireless LAN) and IP address (Wired LAN) will be displayed in the 
idle screen.
 
f Press the  button on the control panel and the input source\
 screen is displayed, then press  as to 
select [Network].
LOGIN PASSWORD :   5678
PROJECTOR NAME :   PROJECTOR
IP ADDRESS(WIRELESS) :   172.28.120.1
IP ADDRESS(WIRED) :   192.168.1.100
 
Network input idle screen
 
f LOGIN PASSWORD
 
f PROJECTOR NAME
 
f IP ADDRESS(WIRELESS)
 
f IP ADDRESS(WIRED) 
Attention
 
f Please do not move or transport the projector while the wireless module \
is attached. Doing so maybe cause the wireless 
module to be damaged.
 
f The blue LED of the wireless module will be off when the projector is in standby mode, it will light when the power is\
 turned 
on and it will blink during wireless communicating.  
Please do not remove the wireless module while the LED is blinking.
 
f When executing an invalid operation during network input, the icon 
 that indicates the key operation is invalid will be 
displayed. In this case, press the  button and execute each function from the menu operation.
Note
 
f The projector name is fixed as “PROJECTOR” and cannot be changed.
 
f Wireless LAN and wired LAN cannot be used in the same segment.
 
f The settings of the wireless module are as follows: 
[SSID] NetworkDisplay
[Channel] 1
[IP address] 172.28.120.1
[Subnet] 255.255.255.0
[Gateway] 0.0.0.0
[Access point Encryption]
None
Computer setting
1)   Turn on the computer.
2)  Make the network setting according to your system administrator.
 
f Please make the network settings for the computer and the projector acco\
rding to your system administrator.
3)  Connect to the network that has been set in the projector.
 
f If you use a computer, click on the task tray  (bottom right of the computer), then select the same name as the 
[SSID] that has been set in the projector.
 
f Please confirm [SSID] in the [Expand] menu → [Network] → [Network information] of this projector .
Note
 
f If you use any wireless LAN connection utility that meets the OS standard, follow the operation instruction of the utility to 
connect it.
Chapter 5   Operation of Function - Network connection  
						

							ENGLISH - 83
About Presenter Light
(The wireless module (Model No.: ET-WML100) of the optional accessories is required if the wireless LAN is connected.)
By using still image transfer application software “Presenter Light” that supports Windows computers, you can transfer im-
ages and audio to the projector via the wired LAN/wireless LAN. 
Download the “Presenter Light” to your computer
1)   Activate the Web browser in the personal computer.
2)   Enter the IP address set by the projector into the URL input field of the web browser.
 
f The [Network Display System] screen is displayed.
3)  Click [Download].
 
f The download screen of “Presenter Light” is displayed.
4)  Click [Download].
 
f The download confirmation screen of the executable file “Presenter Light.exe” is displayed.
5)  Save “Presenter Light.exe” on the computer desktop.
 
f This software is used as the executable file format. It cannot be installed in the computer .
 
f Execute this file when using the software. Please save this software or make a shortcut for convenient use.
Note
 
f For more details about how to use the software “Presenter Light”, please refer to the operating instructions of “Presenter 
Light Software” of the supplied CD-ROM.
 
f Download the latest versions of “Presenter Light” software from the following URL.  
http://panasonic.net/avc/projector/software/
Chapter 5   Operation of Function - About Presenter Light  
						

							84 - ENGLISH
About VueMagic
(The wireless module (Model No.: ET-WML100) of the optional accessories is required if the wireless LAN is connected.)By using still image transfer application software “VueMagic”, you can transfer images to the projector when iPad / 
 iPhone / iPod touch or Android terminals are connected to this projector through the wireless LAN.
Connecting with the VueMagic compatible device
1)  Check the SSID set in the projector.
 
f Check the [SSID] in the [Expand] menu → [Network] → [Network information].
2)  Choose the SSID of this projector on the wireless LAN setting screen of \
the connected device, and 
then connect the wireless.
3)  Press the  button on the remote control to select 
[Network]. 
 
f Switch to the network input.
 
f Press the  button on the control panel and select the input\
 source in the Input menu.
 
f Check the login password (a four-digit number that is automatically generated) and the IP  address (wireless LAN) which 
are displayed on the Network idle screen.
4)   Start the VueMagic mobile presenter application of the correspondent VueMagic devices.
5)  Choose the model No. of this projector in the projector list.
 
f The connection confirmation screen is displayed.
6)  Choose the display position.
 
f The password entry screen is displayed.
7)  Enter the login password and click [OK].
 
f The connected device screen is projected on the screen.
Note
 
f When connecting to the iOS device or Android device, you must install the dedicated application “VueMagic” to the device. 
For detailed information, refer to the following web site. (Only in English.)  
URL http://vuemagic.pixelworks.com
Disconnecting  with the VueMagic compatible device
Close the VueMagic mobile presenter application of the device by clicking the .
Chapter 5   Operation of Function - About VueMagic  
						

							ENGLISH - 85
Web control function
(The wireless module (Model No.: ET-WML100) of the optional accessories is required if the wireless LAN is connected.)
Using Web control functions, you can perform the following operations from a computer. 
f Setting and adjustment of the projector
 
f Displaying projector status
 
f Setting of E-mail message sending
Computer that can be used for setting
A web browser is required to use the web control function. Confirm that your web browser can be used beforehand.
OS Compatible web browser
Windows Internet Explorer 7.0/8.0/9.0/10.0/11.0
Mac OS Safari 4.0/5.0/6.0/7.0
Note
 
f Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used 
beforehand.
Accessing from the web browser
1)  Activate the Web browser in the personal computer.
2)   Enter the IP address set by the projector into the URL input field of the web browser. 
 
f The [Network Display System] screen is displayed.
3)  Click [Login ] and enter the password in the [Password] column.
 
f The factory default setting of the user name is “admin” (fixed) and the password is “admin”.
4)  Click [Login ].
 
f The [System Status] page is displayed.
Note
 
f You can click the upper right corner of the web browser screen to select the display language (Only for English, Japanese, 
Traditional Chinese and Simplified Chinese).
 
f Do not perform setting or control simultaneously by starting up multiple\
 web browsers. Do not set or control the projector 
from multiple computers.
 
f Change the password first. (eight characters in single byte) ( x page 87)
 
f If the screen for the web control is not displayed, consult your network\
 administrator.
Chapter 5   Operation of Function - Web control function  
						

							86 - ENGLISH
Description of each item
1 [Logout]
Exit the web connection screen by clicking this item.
2  [System Status]
The [System Status] page is displayed by clicking this 
item.
3  [General Setup]
The [General Setup] page is displayed by clicking this 
item.
4  [Picture Setup]
The [Picture Setup] page is displayed by clicking this 
item. 5 
[Image Setup]
The [Image Setup] page is displayed by clicking this 
item.
6  [Alert Setup]
The [Alert Setup] page is displayed by clicking this 
item.
7  [Mail Setup]
The [Mail Setup] page is displayed by clicking this 
item.
8  [Network Setup]
The [Network Setup] page is displayed by clicking 
this item.
[System status] page
Display the status of the projector for the following items.
1 [Model Name]
Displays the model No. of the projector.
2  [Versions]
Displays the version of the firmware of the projector. 3 
[LAN Status]
Displays the connection status of the LAN.
4  [Wireless Status]
Displays the connection status of the wireless LAN.
Chapter 5   Operation of Function - Web control function  
						

							ENGLISH - 87
[General Setup] page
[Change Password for Webpage] is displayed.
1 [Enter Old password]
Enters the configured password.
2  [Enter New password]
Enters the new password.
3  [Confirm New password]
Enters the desired new password again for 
confirmation. 4 
[Apply]
Updates the settings.
5  [Power]
Turns on/off the power.  
6  [Source Select]
Switches the input source of the projector.
[Picture Setup] page
1 [Brightness]
Adjusts the brightness of the projected image.
2  [Contrast]
Adjusts the contrast of the projected image.
3  [Sharpness]
Adjusts the sharpness of the projected image. 4 
[Color]
Adjusts the color saturation of the projected image.
5  [Tint]
Adjusts the skin tone of the projected image.
6  [Color temperature]
Adjusts the color temperature of the projected 
image.
Chapter 5   Operation of Function - Web control function  
						

							88 - ENGLISH
[Image Setup] page
1 [Aspect]
Switches the aspect of the projected image.
2  [Fine sync]
Adjusts the fine sync of the projected image.
3  [H Position]
Adjusts the horizontal position of the projected image.
4  [V Position]
Adjusts the vertical position of the projected image.
5  [H.Size]
Adjusts the total number of dots of the projected 
image.
6  [Freeze]
Switches the freeze function between on and off. 7 
[Auto PC adj.]
Executes the Auto PC adj. function.
8  [V Keystone]
Corrects the keystone in vertical direction.
9  [H Keystone]
Corrects the keystone in horizontal direction.
10  [Curved correction]
Corrects the pincushion or barrel of the projected 
image.
11  [Corner correction]
Corrects the four corners of the projected image.
Chapter 5   Operation of Function - Web control function  
						

							ENGLISH - 89
[Alert Setup] page
Set the contents of the E-mail to inform the abnormality of the projecto\
r.
1 [Alert Type]
Selects the alert type.
2  [Alert Mail Notification]
Checks the alert E-mail when transmitting.
3  [Mail Subject]
Enters the subject of the E-mail. (Up to 100 
characters in single byte) 4 
[Mail Content]Enters the content of E-mail which is associated with 
the selected [Alert Type] and then clicks [Apply]. 
(Up to 255 characters in single byte)
5  [Apply]
Clicks [Apply] to save the contents which are 
entered in [Mail Subject] and [Mail Content].
Note
 
f [Mail Subject] /[Mail Content] is not supported with the double-byte characters (e.g. Korean, Chinese and Japanese).
[Mail Setup] page
1  [Mail Server]
Enters the IP address of SMTP server.  
(Up to 39 characters in single byte)
2  [User Name]
Enters the user name.  
(Up to 19 characters in single byte)
3  [Password]
Enters the password.  
(Up to 19 characters in single byte) 4 
[To]
Enters the recipients of the E-mail. If you want to 
send E-mail to some recipients, please separate 
them by using semicolon (;). (Up to 299 characters 
in single byte)
5  [Test Mail]
Clicks [Test Mail] to send the test E-mail.
6  [Apply]
Clicks [Apply] to save the content after entering 
each item.
Note
 
f If the server is not compatible with the login authentication of the adv\
anced SMTP, the e-mail function is disable. 
 
f If the server is not compatible with the advanced SMTP, [User Name] is required, but [Password] is not required.
 
f If the test E-mail is not sent, make sure that each item is set correctl\
y.
Chapter 5   Operation of Function - Web control function  
						

							90 - ENGLISH
[Network Setup] page
 
1 [LAN Setup]
Sets the items of the wired LAN.
[Obtain an IP address automatically] / [Use the 
following IP address]
Selects [Obtain an IP address automatically] if you 
want to enable the DHCP client.
[IP Address]
Enters the IP address when not using a DHCP 
server.
[Subnet]
Enters the subnet mask when not using a DHCP 
server.
[Gateway]
Enters the default gateway address when not using 
a DHCP server.
[DNS]
Enters the DNS server when not using a DHCP 
server.
Allowed characters: Numbers (0 - 9), period (.)
(Example: 192.168.0.253) 2 
[Wireless Setup]
Sets the items of the wireless LAN.
[Wireless LAN]
Selects [Enable] when you want to enable the    
wireless LAN function.
[SSID]
The character string will be able to change when 
the projector is connected.
[Channel]
Selects the channel from [1] ~ [11] for use.
[Access Point Encryption]
Selects [Disable] when encryption is disabled.  
Selects [WPA2PSK_AES] when encryption is 
enabled.
[Access Point key]
Enters the encryption key. (8 to 63 alphanumerics)   
Checks [Show key] to make the characters 
visible. 
3  [Apply]
Updates the settings.
Note
 
f Changing LAN settings while connected to the LAN may cause the connection to cut out.
 
f When [Factory default] is executed, the setting values of [Wireless Setup] will be returned to the factory default settings.
 
f The encryption of the wireless LAN is disabled before the projector leav\
es the factory. If you want to use the wireless LAN to 
communicate, it is recommended that the encryption of the [Wireless Setup] is set to [WP A2PSK-AES] for security.
Chapter 5   Operation of Function - Web control function