Panasonic LCD Projector Pt Tw342 Operating Instructions

							ENGLISH - 71
[Memory Viewer] menu
On the menu screen, select [Memory Viewer] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.
 
f After selecting the item, press as to set.
Note
 
f The [Memory Viewer] menu is available when input the [Memory Viewer] signal.
 
f The menu except for [Set Slide] which settings have been changed is not yet ef fective before the [Apply] is not executed.
[Set Slide]
Start the slide show.
1) Press as to select [Set Slide].
2)  Press the  button.
 
f Slide show will start.
[Slide Transition Effect]
Set the slide transition effect when the slide show image is switching.
1)  Press as to select [Slide Transition Effect].
2)  Press the  button.
3)  Press as to switch the item
.
 
f The items will switch each time you press the button.
[Slide down] Switches the image from the top to the bottom.
[Slide right] Switches the image from the left to the right.
[Sort Order]
Set the sort order of the slide show.
1) Press as to select [Sort Order].
2)  Press the  button.
3)  Press as to switch the item
.
 
f The items will switch each time you press the button.
[Extend order] Sort files or folders in extended order.
[Size order] Sort files or folders in amount of data order.
[Time order] Sort files or folders in stored time order.
[Name order] Sort files or folders in name order.
[Rotate]
Set the rotate direction of image.
1) Press as to select [Rotate].
2)  Press the  button.
3)  Press as to switch the item
.
 
f The items will switch each time you press the button.
Chapter 4   Settings - [Memory Viewer] menu  
						

							72 - ENGLISH
[No rotate]Rotate is disabled.
[270 Degrees] Rotates 270 degrees in anti-clockwise direction.
[180 Degrees] Rotates 180 degrees.
[90 Degrees] Rotates 90 degrees in anti-clockwise direction.
[Best Fit]
Set the image whether or not to fit with the projected screen.
1) Press as to select [Best Fit].
2)  Press the  button.
3)  Press as to switch the item
.
 
f The items will switch each time you press the button.
[On] Displays the image to fit with the aspect of the projected screen.
[Off] Displays in the normal pixels of the image.
[Repeat]
Set whether or not to play the slide show repeatedly.
1) Press as to select [Repeat].
2)  Press the  button.
3)  Press as to switch the item
.
 
f The items will switch each time you press the button.
[On] Repeat broadcast the first file after the last file is broadcasted.
[Off] Return to the thumbnail display after the last file is broadcasted.
[Apply]
Executes the setting in slide show.
1) Press as to select [Apply].
2)  Press the  button.
 
f The setting of the items except for [Set Slide] will be effective.
Chapter 4   Settings - [Memory Viewer] menu  
						

							ENGLISH - 73
[Info.] menu 
On the menu screen, select [Info.] from the main menu.
Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.
[Info.]
Display the status of the projector.
1) Press as to select [Info.].
 
f The [Info.] screen is displayed.
 
f You can also press the  button on the remote control. (x page 39)
[Input] The selected input source and the system are displayed.
[H-sync freq.] The horizontal frequency of the input signal is displayed in kHz. [- - - - ] is displayed when no 
signal is detected.
[V-sync freq.] The vertical frequency of the input signal is displayed in Hz. [- - - -] is displayed when no signal 
is detected.
[Lamp status] The setting status of [Lamp control] is displayed.
[Lamp counter] The usage time of the lamp is displayed. (Displays the converted runtime when [ 
 (Eco 1)] is 
using.)
[Power management] The setting status of [Power management] is displayed.
[Image mode] The setting status of [Image mode] is displayed.
[S/N] The serial number of the projector is displayed. The serial number is used to service the 
projector.
Chapter 4   Settings - [Info.] menu   
						

							74 - ENGLISH
Chapter 5   Operation of Function
This chapter describes the operation methods of some functions.  
						

							ENGLISH - 75
About Memory Viewer function
The Memory Viewer function makes it is possible to project the video or still image \
stored in the USB memory.
What you can project with the Memory Viewer function
Memory Viewer function supports the following image files.
VideoExtension
Video codec Audio codec Video format
avi MotionJpeg ADPCM YUV 4:4:4, YUV 4:2:2, YUV 4:2:0
Maximum: 1 280 x 720, 30 fps
PictureExtension
Format
Description
jpg/jpeg Baseline coding 24 bits
Progressive RGB 24 bits Resolution : 8 x 8 ~ 10 000 x 10 000 
Resolution : 8 x 8 ~ 1 280 x 800 
bmp Palette-based 1, 4, 8 bits,  
RGB 24, 32 bits The maximum resolution : 1 280 x 800 
png True color 24 bits/48 bits The maximum resolution : 1 280 x 800 
gif Palette-based 1, 4, 8 bits,  Palette - 24 bits color spaces;  
The maximum resolution : 1 280 x 800 
tif / tiff The maximum resolution : 1 280 x 800 
pdf
Note
 
f The maximum size of file is 2 GB.
 
f The total number of folders/files that can be displayed is about 500 at the maximum. In addition, other than the supported 
format as the above table cannot be displayed.
 
f You cannot play the files which is protected by Digital Rights Management (DRM).
 
f You cannot play the PDF files which are protected by security setting.
 
f It maybe impossible to resume playing even if the file is recorded in the supported format.
Cautions on using USB Memory
Please observe the following.
 
f Do not put USB memory or its cap within close reach of children. Swallow\
ing them may cause suffocation.
 
f If the smoke or questionable odor rise, remove the USB memory from the p\
rojector, and then contact your dealer.
 
f Do not put water, chemical or oil to the USB memory. It may cause short out or fire.
 
f Do not put foreign objects or put metal objects to the USB terminal. Sta\
tic electricity may cause data loss or data corruption.
 
f Do not remove the USB memory from the computer or the projector while th\
e USB memory is reading out or writing the 
data. It may cause data loss or data corruption.
 
f Do not store the USB memory where high temperature, humid or dusty place or magnetized items are around.
Note
 
f It is compatible with the USB memory sold in the market.
 
f It cannot be used the other format other than the formatted with F AT16 and FAT32.
Inserting the USB memory
1) Insert the USB memory directly into the  terminal.
Attention
 
f When inserting the USB memory, confirm the direction of the plug and do not damage the terminal.
Removing the USB memory
1)  Make sure that the USB memory is not flashing, and then unplug it.
Attention
 
f Please note following points when removing the USB memory. 
-   The indicator of the USB memory is blinking means that the projector is reading out the data. Do not remove the USB 
memory while it is blinking.
-   When using a USB memory without an indicator, you cannot recognize when the projector reading out the data. Please 
remove it from the projector after closing the memory viewer function or\
 turning off the projector.
-   Do not insert and remove the USB memory in a short time. Remove the USB memory at least five seconds after inserting. 
And insert it at least five seconds after removing. When inserting or removing the USB memory , the projector takes about 
five seconds to identify the operation.
Chapter 5   Operation of Function - About Memory Viewer function  
						

							76 - ENGLISH
Note
 
f The USB memory can be inserted or removed regardless of the power status\
 of the projector.
Displaying the Memory Viewer screen
1)  Press the  button on the remote control or switch the 
input source to [Memory Viewer].
 
f Press the  button on the control panel and select the input\
 source in the Input menu.
2)  Insert the USB memory directly into the  terminal.
 
f The standby screen “please press RC ENTER ” is displayed while the USB memory icon is displayed at the lower left of 
the screen.
 
f When the partition are separated in USB memory, several USB icons will be displayed.
3)  Press the  button on the remote control.
 
f The root directory of the USB memory will be displayed in thumbnail on t\
he screen.
Playing the pictures
It will display a picture when play the picture manually every time.
1)  Press asqw  on the remote control to select a file.
2)  Press the  button on the remote control.
 
f The picture will display on the full screen.
3)  Press w to switch to the next picture, press  q to return to the previous picture.
4)  Press the  button on the remote control.
 
f Return to the thumbnail screen.
Executing the slide
All pictures in the same folder will play automatically when [Sort Order] and [Slide  Transition Effect] and so on of [Memory 
Viewer] menu are set to the special setting.
1)  Press asqw  on the remote control to select a file.
2)  Press the  button to select the [Memory Viewer] → [Set Slide].
3)  Press the  button on the remote control.
 
f The picture will display on the full screen.
 
f Press the  button to return to the thumbnail screen.
Note
 
f If you press the  button during the slide show, the image will stop and the a menu displays. The playing will 
continue when the menu disappears.
 
f When the slide show is playing the files in the second or subsequent thumbnail pages, if the settings of the [Memory viewer] 
menu are changed, the slide show will resume from the first file in the first thumbnail page.
Playing the video
Playing the video file.
1)  Press asqw  on the remote control to select a file.
2)  Press the  button on the remote control.
 
f Playing on the full screen.
 
f To operate the controller which is displayed on the bottom of the screen \
with the remote control.
Video playing is terminated, and return to the thumbnail screen.
 /   Pauses / plays the video.
10 seconds backward / forward skip and will continue to play thereafter.
60 seconds backward / forward skip and will continue to play thereafter.
 / The frame will switch between display and non-display each time you pres\
s the icon. The 
video can be played repeatedly when the frame is displayed.
Chapter 5   Operation of Function - About Memory Viewer function  
						

							ENGLISH - 77
Note
 
f If there are any invalid operations during video playing, the icon  indicating invalid key operations will appear.
 
f There may be a delay for a few seconds in the beginning of the video pla\
ying.
 
f The controller cannot be hidden.
Displaying the PDF 
Operating the controller to display the PDF.
1)  Press asqw  on the remote control to select a PDF file.
2)  Press the  button on the remote control.
 
f Displaying the PDF on the full screen.
 
f To operate the controller which is displayed on the bottom of the screen \
with the remote control.
 
f When the button is selected, the background display will be switched between blue and white.
5 5GO1 1/10
/Displays the previous or next page.
/The page number ## of [55GO1 1/10##] increases or decreases by 1 page each time you click the 
button.
/The page number ## of [5 5GO1 1/10 ##] increases or decreases by 5 pages each time you click the 
button.
[
 ##] Jumps to page number ## directly.
Switches between PDF full width display and single whole page display
.
Switches the display size in 3 levels of magnification each time you click the button.
When the button is selected, press asqw on the remote control to move the display 
screen up, down, left and right. Clicks this button again to release it.
Terminates the PDF display and returns to the thumbnail display.
Note
 
f PDF display is switched at intervals. Please do not perform continuous operations during a short period of time.
Termination of the Memory Viewer
1)  Press asqw  to select the thumbnail  which is displayed on the upper left corner.
2)  Press the  button on the remote control.
 
f Return to the standby screen “please press RC ENTER”.
Chapter 5   Operation of Function - About Memory Viewer function  
						

							78 - ENGLISH
USB Display function
The USB Display function makes it is possible to project the image and a\
udio from the computer through a USB converting 
cable.
When using Windows
 
r Windows operating environment
OS Windows Vista 32 bit, Windows 7 32/64 bit, Windows 8 32/64 bit, Windows 8.1 32/64 bit
CPU Intel Core 2 Duo 2.0 GHz or faster, the compatible processor
Amount of memory 256 MB or more (Recommended : 512 MB or more)
Hard-disk free space 20 MB or more
Display Resolution 640 x 480 or more, 1 600 x 1 200 or less
 
f There is no guarantee for all the computers that meet the above conditio\
ns will operate properly. 
Projecting the USB display
Note
 
f The USB Display function and the Presenter Light software cannot be used\
 at the same time. Before using the USB Display 
function, terminate the Presenter Light software.
1)  Connect the  terminal of the projector to a computer with a USB cable.
2)  Press the  button on the remote control or switch the 
input source to [USB Display].
 
f You can also press the  button on the control panel and select the input source in the Input menu.
 
f The startup screen will be displayed automatically due to the driver which is built-in the projector , and executing the 
installation according to the instructions of the screen. The displaying of the auto installation screen is depending on the 
settings of computer. At this time, please select “Run autorun.exe”. Please double-click “autorun.exe” in the folder of the 
“USB Display” when the automatic startup is disabled.
 
f The computer screen is projected.
3)  Click the driver icon  in the task tray (bottom right of the computer) and select one item in Pop-
up menu.
 
f Pop-up menu is only displayed in English.
 
f The item which is displayed in gray is unavailable.
[Active audio] / [Disable audio] Set whether to output the audio from the computer.
[Play video] / [Pause video] Switch between playing and pausing the image.
[Start] / [Stop] Set whether to display the image from the computer.
[Exit] Displayed in gray and cannot be selected.
Note
 
f It will take a while when you want to project the computer screen.
 
f Connect a USB cable directly to the USB connector of a computer. It will not work when connect through a USB hub.
 
f At the time that the computer screen is projected, the resolution of the\
 computer may be forcibly changed depending on the 
combination of computer and projector.
 
f When executing an invalid operation during USB Display input, the icon 
 that indicates the key operation is invalid will be 
displayed.
Termination of the USB display
1)  When terminating the USB display, remove the USB cable directly.
 
f There is no need to follow "Remove hardware safely" when a USB cable is disconnected.
Chapter 5   Operation of Function - USB Display function  
						

							ENGLISH - 79
When using Mac OS
 
r Mac OS operating environment
OS Mac OS X 10.7, 10.8, 10.9
CPU Power PC G4 1GHz or faster
Amount of memory 512 MB or more
Hard-disk free space 20 MB or more
Display Resolution 640 x 480 or more, 1 600 x 1 200 or less
 
f There is no guarantee for all the computers that meet the above conditio\
ns will operate properly. 
Projecting the USB display
1)  Connect the  terminal of the projector to a computer with a USB cable.
2)  Press the  button on the remote control or switch the 
input source to [USB Display].
 
f You can also press the  button on the control panel and select the input source in the Input menu.
 
f The virtual disk which is named “USB Display” will be mounted on desktop.
3)  Double-click “Monitor.app” in the virtual disk that has been mounted.
 
f The computer screen is projected.
4)  Right-click the driver icon  in the dock of computer and select one item in Pop-up menu.
 
f The item which is displayed in gray is unavailable.
[Active audio] / [Disable audio] Set whether to output the audio from the computer.
[Play video] / [Pause video] Switch between playing and pausing the image.
[Start] / [Stop] Set whether to display the image from the computer.
[Options] Set the items of “Keep in Dock”, “Open at Login” or “Show in Finder”.
[Show All Windows] Display the background of computer on the full screen temporarily.
[Hide] / [Show] Set whether to display the USB driver icon.
[Quit] Terminate the USB Display.
Note
 
f It will take a while when you want to project the computer screen.
 
f Connect a USB cable directly to the USB connector of a computer. It will not work when connect through a USB hub.
 
f At the time that the computer screen is projected, the resolution of the\
 computer  may be forcibly changed depending on the 
combination of computer and projector.
 
f When executing an invalid operation during USB Display input, the icon 
 that indicates the key operation is invalid will be 
displayed. 
 
f The virtual disk may not be mounted on the desktop depending on your computer . In this case, please open [Finder] and 
then refer to the "USB Display" in [DEVICES].
Termination of the USB display
1)  When terminating the USB display, remove the USB cable directly. Chapter 5   Operation of Function - USB Display function  
						

							80 - ENGLISH
Network connection
This projector has network function that allows the following by connecting a computer. The wireless module (Model No.: ET-
WML100) of the optional accessories is required if the wireless LAN is connected. 
f WEB control 
By accessing to the projector from a computer, you can perform setting, adjustment, status display, etc. of the projector. 
Refer to “Web control function” ( x page 85) for details.
 
f Multi Projector Monitoring & Control software  
This software allows you to monitor and control multiple projectors connected to the LAN. For details about “ Multi Projector 
Monitoring & Control software”, please refer to the Operating Instructions which is included in the CD-ROM of accessories.
 
f Presenter Light  
By using still image transfer application software “Presenter Light” that supports Windows computers, you can transfer 
images and audio to the projector via the wired LAN/wireless LAN.  For more details, please refer to the Operating 
Instructions which is included in the CD-ROM of accessories.  
 
f VueMagic  
By using still image transfer application software “VueMagic”, you can transfer images to the projector when iPad / 
iPhone / iPod touch or Android terminals are connected to this projector through the wireless L\
AN.  Refer to “VueMagic” 
(x page 84) for details.
 
f PJLink 
By using PJLink protocol, you can send inquiries about the operations or status of the projector from a computer . Refer to 
“Using the PJLink protocol” ( x page 101) for details.
When connecting via wired LAN
Connection example
AC IN 
LAN cable (straight)LAN cable (straight)
Hub
Computer
Projector
 
r Name and function of  terminal1 23
1 LAN LINK/ACT lamp (yellow) 
Lights on when connected.  
Blinks when transmitting/receiving data.
2   terminal (10BASE-T/100BASE-TX)
Used to connect LAN cable here. 3 
LAN 10/100 lamp (green)
Lights on when connected to the 100BASE-TX.
Attention
 
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
 
f   When connecting cables to both the  terminal and the  terminal, it may be difficult to remove 
the LAN cable which is connected to the  terminal. When removing the LAN cable from the  terminal, remove a 
cable connected to the  terminal or the  terminal beforehand.
Note
 
f A LAN cable is required to use the wired LAN function.
 
f Use shielded LAN cable (STP cable) that is compatible with category 5 or above.
 
f Use a LAN cable with length of 100 m or shorter.
Chapter 5   Operation of Function - Network connection