Panasonic LCD Projector Pt Tw230 Operating Instructions

Basic operations by using the remote control
ENGLISH - 31
Basic Operation
Using the AV MUTE function
 button
Press the  button on the remote control 
to black out the image. To restore to normal, press the 
 button again or press any button. 
When the Logo is not set, the screen changes each time  z
you press the  button as follows.
The projected Logo (the logo can be set according  z
to users’ favorite) is transferred from computer to 
the projector by “Logo Transfer Software” on the 
supplied CD-ROM...

32 - ENGLISH
Settings
Menu Navigation
Navigating through the menu
Operating procedure J
Press the  button.1 ) 
The Main Menu screen appears.
Press ▲▼ to select the Main Menu 2 ) 
item.
Select the desired item from the 9 items: [Input], 
[PC adjust], [Image select], [Image adjust], 
[Screen], [Sound], [Setting], [Information] and 
[Network]. The selected item is highlighted with an 
orange cursor and the submenu of the selected 
item appears on the right.
Press ► or the  button.3 ) 
The submenu appears so...

Menu Navigation
ENGLISH - 33
Settings
Main menu
The main menu consists of the following 9 menu 
items.
When a main menu item is selected, the screen 
changes to a submenu selection screen.
Input
PC adjust
Image select
Image adjust
Screen
Sound
Setting
Information
Network
Sub menu
The sub-menu screen of the selected main menu 
appears, and you can set and adjust the various items 
in the submenu.
 JInput [  ]
Sub-menu itemFactory 
defaultPage
Computer 1RGB35
Computer 2RGB35
HDMI -35
Video -35
S-video -...

Menu Navigation
34 - ENGLISH
Settings
 JImage adjust [  ]
Sub-menu itemFactory defaultPage
Contrast3241
Brightness3241
Color*13241
Tint*13241
Color temp.Mid41
Red3242
Green3242
Blue3242
Sharpness842
Gamma842
Noise reduction*1L 142
Progressive*1L 1 43
Reset-43
Store- 43
When input video signal to the projector, these *1 : 
functions will be available.
Screen [  J ]
Sub-menu itemFactory defaultPage
Normal - 44
Full - 44
Wide (16:9) - 44
Zoom- 44
True *1- 44
Natural wide *2-44
Custom - 44
Custom adj. - 45...

ENGLISH - 35
Settings
Input menu
Select [Input] from the Main Menu (see 
“Navigating through the menu” on page 32), 
then select the item from the sub-menu.
Remote controlControl panel
Computer 1: RGB/Component 
/RGB (Scart) 
Press ▲▼ to select [Computer 1]. 1 ) 
Press ► to access the submenu.2 ) 
Press ▲▼ to select RGB, Component 3 ) 
or RGB(Scart).
Press the  button.4 ) 
When [Computer 1] is selected, [Component] or  z
[RGB(Scart)] can be available. 
Computer 2: RGB
Press ▲▼ to select [Computer 2...

Input menu
36 - ENGLISH
Settings
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image, 
select a specific broadcast signal format from among 
[PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL-M] and 
[PAL-N].
Component
Auto
The projector automatically detects an incoming video 
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, 
select a specific component video signal format 
among...

ENGLISH - 37
Settings
AUTO PC adjust
Select [PC adjust] from the Main Menu (see 
“Navigating through the menu” on page 32), 
then select the item from the sub-menu.
Remote controlControl panel
Auto PC adj.
Auto PC adjustment function is provided to 
automatically adjust Fine sync, Total dots, Horizontal 
and Vertical positions to conform to your computer.
Press ▲▼ to select [Auto PC adj.] and 
then press the  button. 
[Please wait...] z appears while the Auto PC 
adjustment is in process.
To store...

38 - ENGLISH
Settings
Manual PC adjust
Select [PC adjust] from the Main Menu (see 
“Navigating through the menu” on page 32), 
then select the item from the sub-menu.
Remote controlControl panel
Some computers employ special signal formats 
which may not be tuned by Multi-scan system of this 
projector.  Manual PC adjustment enables you to 
precisely adjust several parameters to match those 
signal formats. The projector has 10 independent 
memory areas to store those parameters manually 
adjusted. It...

Manual PC adjust
ENGLISH - 39
Settings
Current mode
Press ▲▼ to select [Current mode].1 ) 
Press ► or the  button to 2 ) 
enter the next submenu to show 
H-sync freq. and V-sync freq. of the 
connected computer.
Clamp
Press ▲▼ to select [Clamp].1 ) 
Press the  button to display 2 ) 
the adjustment dialog box.
Press ◄► to adjust the clamp level.3 ) 
When the image has dark bars, try this  z
adjustment.
Display area H
Press ▲▼ to select [Display area H].1 ) 
Press the  button to display 2 ) 
the adjustment...

40 - ENGLISH
Settings
Image select 
Select [Image select] from the Main Menu (see 
“Navigating through the menu” on page 32), 
then select the item from the sub-menu.
Remote controlControl panel
Dynamic
For viewing pictures in a bright room.
Press ▲▼ to select [Dynamic] and then 
press the  button.
Standard
Normal picture mode preset on the projector.
Press ▲▼ to select [Standard] and then 
press the  button.
Real
Picture mode with improved halftone for graphics. 
Press ▲▼ to select [Real] and then press...