Panasonic LCD Projector Pt Tw230 Operating Instructions

Precautions for Use
ENGLISH - 11
Important 
 
Information
Cautions when setting the projectors J
Do not stack the projectors. z
Do not block the ventilation ports  z
      (intake and exhaust) of the projector.
Avoid heating and cooling air from the air  z
      conditioning system directly blow to the ventilation 
      ports (intake and exhaust) of the projector.
You can tile the projector within  z± 20 degrees 
horizontally. 
Do not place the projector in an enclosed space.  z
If you need to place the...

Precautions for Use
12 - ENGLISH
Important 
 
InformationCautions on use
In order to get the picture quality J
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light  z
from indoor lamps from shining onto the screen.
Depending on where the projector is used, heated air from an exhaust port or warm or cold air from an air  z
conditioner can cause a shimmering effect on screen. 
Avoid use in locations where exhaust or streams of air from projector,...

Precautions for Use
ENGLISH - 13
Important 
 
Information
Accessories
Make sure the following accessories are provided with your projector. Numbers in the brackets ( ) show the 
number of accessories.
Remote control unit (x1)
(6451053893)
Power cord (x1)
(6103580203)
CD-ROM (x1)
(6103589312)
Batteries (AAA/R03 or 
AAA/LR03 type) (x2)
(for remote control unit)
RGB signal cable (x1) 
(6103580425)
AC power cord holder 
(x1) (6103592442)  
       (6103592466) 
Lens cover (x1)
(6103490106)
String (x1)...

Precautions for Use
14 - ENGLISH
Important 
 
InformationContents of the supplied  JCD-ROM
The contents of the supplied CD-ROM are as follow. [: Instructions/List (PDF), : Software]
Operating Instructions – Projector Operations
Operating Instructions – Network Operations.
 
Multi Projector Monitoring & Control Software 2.6(Windows)
This software allows you to monitor and control multiple projectors connected to the LAN.• 
 
Operation Manual Multi Projector Monitoring & Control Software 2.6
Logo...

ENGLISH - 15
Preparation
About Your Projector
Remote control
(1)  Button
Execute the setting of Auto setup in the setting 
menu. (Æpage 48)
(2) Input Selection Buttons: , 
 , , , 
, . 
These buttons are used to select the input signal. 
(Æpage 29)
(3) ▲▼◄► Buttons,  Button
Navigate the MENU display.(Æpage 32)
(4)  Button
Select a screen mode. (Æpage 44-46)
(5)  Button
Open or close the On-Screen Menu. (Æpage 32)
(6)  Button
     Pauses the projected image and sound tentatively. 
(Æpage 30)
(7)  Button...

About Your Projector
16 - ENGLISH
Preparation
(1)  Control panel (Æpage 17)
(2)  Lamp cover (Æpage 61)
The lamp unit is located inside.
(3)  Remote control signal receiver 
(4)  Projection Lens 
(5)  Speaker 
(6)  Air outlet port
Hot air is exhausted from the exhaust vent. Do • 
not put heat-sensitive objects near this side.
(7)  Air intake port / Air filter cover (Æpage 59)
(8) Indicators
(9) Foucs Lever
Adjusts the focus.
(10) Security bar 
(11) Side terminals (Æpage 17)
(12)  AC IN 
(13)  Adjustable...

About Your Projector
ENGLISH - 17
Preparation
Side terminals
Control panel 
(1) LAN
Connects to a LAN cable for network connection.
(2) HDMI
Connects to HDMI input signals.
(3) COMPUTER IN 1/ COMPONENT IN
Connects to COMPUTER IN 1/ COMPONENT IN 
input signals.
(4) COMPUTER IN 2/ MONITOR OUT
Connects to COMPUTER IN 2/ MONITOR OUT 
input signals or outputs the analog RGB signals 
input the projector.
(5) S-VIDEO IN
 Connects to S-VIDEO input signals.
(6) AUDIO OUT (VARIABLE)
     Outputs the audio signals...

18 - ENGLISH
Preparation
Using Remote control
Installing and Removing batteries
Open the cover1 ) Install batteries and close the cover2 ) 
(Insert the – side first.)
Remove the batteries in the reverse order of  z
installation. 
Setting Remote control ID numbers
When you use the system with multiple projectors, you can operate all the projectors simultaneously or each 
projector individually using single remote control, if unique ID number is assigned to each projector.
After setting the ID number of...

ENGLISH - 19
Getting Started
Setting up
Projection method
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector.
 JMounting on the ceiling and  
projecting forward
 JSetting on a desk/floor and  
projecting from rear
(Using translucent screen)
 JMounting on the ceiling and  
projecting from rear
(Using translucent screen)
 JSetting on a desk/floor and  
projecting forward
Attention
For optimum viewing quality, install the projector in a...

Setting up
20 - ENGLISH
Getting Started
Screen size and throw distance
Place the projector referring 
to the diagram on the right 
and the figures of throwing 
distance. You can adjust the 
display size. 
L 
Screen
L 
SW
ScreenSH
SW
SD
Projected image
SH
L Projection distance (m)
SHHeight of the projection area (m)
SWWidth of the projection area (m)
SDDiagonal length of the projection area (m)
Attention
Before installing, please read “Precautions for Use” ( zÆ pages 10 to 14).   
 JProjection distance...