Panasonic LCD Projector Pt Lx300 Operating Instructions

							Appendix
ENGLISH - 51
Appendix
Control commands J
When controlling the projector from a computer, the following commands are available:
[Projector control command]
CommandControl contentsRemarks
PONPower [ON]
POFPower [OFF]
IISINPUT selection
(Parameter)
VID = Video
RG = Computer
HD1 = HDMI
OSHAV mute function
Turning off the projection and sound temporarily.
Sending the command switches [ON]/[OFF].
Do not switch ON/OFF in a short period of time.
AMTVolume mute function0 = OFF
1 = ON 
QPWPower query000 = Standby
001 = Power on
Q$SLamp condition query
(Call back)
0 = Stand-by
1 = Lamp ON control active
2 = Lamp ON
3 = Lamp OFF control active 
						

							Appendix
52 - ENGLISH
Appendix
Other terminals
Pin assignments and signal names of  J terminal
Outside viewPin No.Signal names
 : Not assigned
 - , ,  : GND terminals
R/PR
G/G  SYNC/Y
B/PB
+ 5 V
DDC data
HD/SYNC
VD
DDC clock
Pin assignments and signal names of  terminal J
Outside viewPin No.Signal names
, , , ,  : Not assigned
 - ,  : GND terminals
R/PR
G/G  SYNC/Y
B/PB
HD/SYNC
VD
Pin assignments and signal names of  terminal J
Outside viewPin No.Signal namesPin No.Signal names
T.M.D.S data 2+T.M.D.S clock shield
T.M.D.S data 2 shieldT.M.D.S clock -
T.M.D.S data 2-CEC
T.M.D.S data 1+—
T.M.D.S data 1 shieldSCL
T.M.D.S data 1-SDA
T.M.D.S data 0+DDC/CEC GND
T.M.D.S data 0 shield+5V
T.M.D.S data 0-Hot plug detection
T.M.D.S clock +
Odd-numbered pins  to 
Even-numbered pins  to  
						

							Appendix
ENGLISH - 53
Appendix
List of compatible signals
The following table specifies the types of signals compatible with the projectors.
Format :   V = VIDEO, R = RGB, Y = YPBPR, H = HDMI
ModeDisplay resolution *1 (dots)
Scanning frequencyDot clock frequency (MHz)Format
Plug and play *3
H (kHz)V (Hz)COMPUTERHDMI
NTSC/NTSC4.43/ PAL-M-15.7559.9-V--
PAL/PAL-N/ SECAM-15.6350.0-V--
525i (480i)
720 x 480i15.7359.913.50Y--
720(1 440) x 480i (*2)15.7359.927.00H-o
625i (576i)
720 x 576i15.6350.013.50Y--
720(1 440) x 576i (*2)15.6350.027.00H-o
525p (480p)720 x 48331.4759.927.00Y/H-o
625p (576p)720 x 57631.2550.027.00Y/H-o
750 (720)/60p1 280 x 72045.0060.074.25Y/H-o
750 (720)/50p1 280 x 72037.5050.074.25Y/H-o
1125 (1080)/60i 1 920 x 1 080i33.7560.074.25Y/H-o
1125 (1080)/50i1 920 x 1 080i28.1350.074.25Y/H-o
1125 (1080)/24p1 920 x 1 08027.00 24.074.25Y/H-o
1125 (1080)/60p1 920 x 1 08067.5060.0148.50Y/H-o
1125 (1080)/50p1 920 x 1 08056.2550.0148.50Y/H-o
VGA640 x 480
31.4759.925.18R/Hoo
35.0066.730.24R/Hoo
37.8672.831.50R/Hoo
37.5075.031.50R/Hoo
43.2785.036.00R/H--
SVGA800 x 600
35.1656.336.00R/Hoo
37.8860.340.00R/Hoo
48.0872.250.00R/Hoo
46.8875.049.50R/Hoo
53.6785.156.25R/H--
MAC16832 x 62449.7374.657.28R/Hoo
XGA1 024 x 768
48.3660.065.00R/Hoo
56.4870.175.00R/Hoo
60.0275.078.75R/Hoo
68.6885.094.50R/H--
MAC211 152 x 87068.6875.1100.00R/H--
WXGA1 280 x 76847.7859.979.50R/H--
60.2974.9102.25R/H--
WXGA1 280 x 72044.7760.074.50R/Hoo
1 280 x 80049.7059.883.50R/Hoo
MSXGA1 280 x 96060.0060.0108.00R/Hoo
75.2075.0130.00R/H-- 
						

							Appendix
54 - ENGLISH
Appendix
ModeDisplay resolution *1 (dots)
Scanning frequencyDot clock frequency (MHz)Format
Plug and play *3
H (kHz)V (Hz)COMPUTERHDMI
SXGA1 280 x 1 024
63.9860.0108.00R/Hoo
79.9875.0135.00R/Hoo
91.1585.0157.50R/H--
1366x7681 366 x 76847.7259.884.75R/Hoo
SXGA+1 400 x 1 05065.3260.0121.75R/Hoo
UXGA1 600 x 1 20075.0060.0162.00R/Hoo
*1: “i” added to the resolution value indicates an interlaced signal.
*2: HDMI signal of 480i and 576i is only supported by 27 MHz Dot clock signal.
*3:  Where marked "o" signals indicates in Plug and Play is compatible with EDID of projector . Unmarked signals in Plug and 
Play may also be compliant if input terminals are written in the format list. Where Plug and Play is unmarked and nothing is 
written in the format list, difficulties in projecting image may occur even when computer and projector appear to have same 
resolution. 
						

							Specifications
ENGLISH - 55
Appendix
Specifications
Model No.PT- LX300EPT-LX270E
Power supplyAC 100 V -240 V  50/60Hz
Power consumption
100 V -240 V   2.7 A -1.0A, 218 W100 V -240 V   2.4 A -0.9A, 218 W
Standby power consumption
0.5 W  When [VGA Out (Standby)]/[In Standby Mode (Audio)] are all set to [Off]. z
1.2 W  When one or more among [VGA Out (Standby)]/[In Standby Mode (Audio)] is/are  z
set to [On].
DLP panel
Panel size14.0 mm (0.55")
(Aspect ratio 4:3)
Display 
methodDLP chip
Pixels786 432 pixels
(1024 x 768 dots)
LensManual zoom 1.1x and manual focus 
F 2.41 to 2.53, f = 21.8 mm to 24.0 mm
Luminous lamp190 W UHM lamp
Light output *13 000 lm2 700 lm
Contrast ratio*14 000 : 1 (all white / all black)
For RGB signal input, set [Color Mode] to [Dynamic] and [Lamp Power Mode] to [Normal]
Applicable 
scanning 
frequency *2
for Video 
signal Horizontal 15.75 kHz / 15.63 kHz, Vertical 60 Hz / 50 Hz
for RGB 
signal
Horizontal 15 kHz to 100 kHz, Vertical 24 Hz to 120 Hz
Dot clock frequency: 165 MHz or less
for YPBPR 
signal
[525i(480i)]    Horizontal 15.75 kHz, Vertical 60 Hz
[625i(576i)]   Horizontal 15.63 kHz, Vertical 50 Hz
[525p(480p)]   Horizontal 31.50 kHz, Vertical 60 Hz
[625p(576p)]   Horizontal 31.25 kHz, Vertical 50 Hz
[750(720)/60p]   Horizontal 45.00 kHz, Vertical 60 Hz
[750(720)/50p]   Horizontal 37.50 kHz, Vertical 50 Hz
[1125(1080)/60i]   Horizontal 33.75 kHz, Vertical 60 Hz
[1125(1080)/50i]   Horizontal 28.13 kHz, Vertical 50 Hz
[1125(1080)/24p]   Horizontal 27.00 kHz, Vertical 24 Hz
[1125(1080)/60p]   Horizontal 67.50 kHz, Vertical 60 Hz
[1125(1080)/50p]   Horizontal 56.25 kHz, Vertical 50 Hz
for HDMI 
signal
525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 
1125(1080)/60i, 1125(1080)/50i, 1125(1080)/24p, 1125(1080)/60p, 1125(1080)/50p
Displayable resolution: VGA to UXGA (non-interlace) z
Dot clock frequency: 25 MHz ~ 162 MHz z
Color system7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projection size30" - 300"
Screen aspect ratio4:3
Projection schemeFront / Rear / Mount on Ceiling / Floor (Menu setting system)
Speaker1 (4 cm x 2 cm)
Maximum usable volume 
output2 W
Measurement, measuring conditions and method of notation all comply with ISO21 118 international *1 : 
standards.
For details of video signals that can be projected using this projector, refer to “List of compatible signals”. *2 : 
(Æpages 53-54) 
						

							Specifications
56 - ENGLISH
Appendix
Model No.PT-LX300EPT-LX270E
Terminals
COMPUTER IN
1 set, high-density D-Sub 15p (female)
[RGB signal] 
     0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
     HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
     VD TTL high impedance, automatic positive/negative polarity compatible
     SYNC/HD and VD are not compliant with 3 value composite SYNC
[YPBPR signal]  
     Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
MONITOR OUT
1 set, high-density D-Sub 15p (female)
[RGB signal] 
     0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
     HD/SYNC TTL high impedance
     VD TTL high impedance
[YPBPR signal]  
     Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
VIDEO 1 (Pin jack 1.0 V [p-p] 75 Ω)
HDMI 1 (HDMI 19 pin, HDCP and Deep color compatible)
AUDIO IN1 (M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more)
VARIABLE 
AUDIO OUT
1 (M3 stereo mini jack, stereo monitor output compatible,
0 V [rms] to 2.0 V [rms] valuable, output impedance 2.2 kΩ and less)
SERIAL IN1 (Mini DIN 3-pin, for RS232 control input)
Power cable length1.8 m (70.9 ")
CabinetMolded plastic
Dimensions
Width: 286 mm (11.26")
Height: 100.6 mm (3.96") (when adjustable feet shortened)
Depth: 192 mm (7.56")
WeightApprox.2.3 k] (5.07 lbs.) *3
Noise level *4When set to [Normal] in [Lamp power mode]: 34 dB
When set to [ECO] in [Lamp power mode]: 29 dB
Operating environment
Operating environment temperature:
5 °C to 40 °C (For 0 - 2 500 ft), (Elevation: below approx. 750 m); 
5 °C to 35 °C (For 2 500 - 5 000 ft), (Elevation: approx. 750 m - approx.1 500 m); 
5 °C to 30 °C (For 5 000 - 10 000 ft), (Elevation: approx. 1 500 m - approx.3 000 m); 
Operating environment humidity: 20 % to 80 % (no condensation)
Remote 
control
Power supplyDC 3 V (Lithium coin battery)
Operating 
rangeApprox. 8 m (26.25 ft) (when operated directly in front of signal receiver)
Weight23 ] (0.811 ozs.) (including battery)
DimensionsWidth : 40.6 mm (1.60"), Length : 86.5 mm (3.41"), Height : 7.2 mm (0.28")
This is an average value. It may differ depending on individual product.*3 : 
Measurement, measuring conditions and method of notation all comply with ISO21118 international *4 : 
standards. 
The part numbers of accessories and separately sold components are subject to change without notice. z 
						

							Specifications
ENGLISH - 57
Appendix
Dimensions

Lens Center
Lens Center
42.4 (1.67)44.3 (1.74)
88.2 (3.47)
100.6 (3.96)
3.7° Max. 286.3 (1
1.27)
192.0 (7.56)
110.0 (4.33) 55.0 (2.17)
82.3 (3.24)
77.8 (3.06)
57.8 (2.28)
77.0 (3.03)
167.7 (6.60)
11
8.7(4.67)
63.0 (2.48)
10.5 (0.41)
125.5 (4.94)
Actual dimension may differ by product.:  
						

							Ceiling mount bracket safeguards
58 - ENGLISH
Appendix
Ceiling mount bracket safeguards
Installation work of the ceiling mount bracket should only be carried by a qualified technician. z
Even if it is during guaranteed period, the manufacturer is not responsible for any hazard or damage caused  z
by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental 
conditions.
Remove an unused ceiling mount bracket promptly. z
Ensure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver. z
For details, see the work instruction manual packed together with the ceiling mount bracket. z
The model Nos. of the accessories and the parts sold separately are subject to change without notice. z
Make sure the screws on the ceiling mount kit cannot touch the metal parts materials (metallic lath, wire or  z
board) in the ceiling board. Otherwise it may result in fire hazard.
Bottom view
Screw hole for 
ceiling mount
Model No. of ceiling mount bracket: 
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
Model No. of projector mount bracket: 
ET-PKL300B
M3 x 0.5
6 mm (0.24")
Torque: 0.8 ± 0.1 N · m 
						

							ENGLISH - 59
Appendix
Index
A
About Your Projector.......................14
Accessories ....................................13
Adjusting the Projector's Height  .....21
Adjusting the zoom and focus ........21
Aspect Ratio ...................................35
Auto Power Off (Min) ......................40
B
Before cleaning/replacing the unit  ..43
Before connecting to the projector..22
Brightness.......................................33
C
Cautions on use..............................12
Cautions when installing .................10
Cautions when transporting ............10
Ceiling Mount..................................36
Ceiling mount bracket safeguards  ..58
Clock...............................................35
Closed Caption  ...............................37
Color Mode  .....................................33
Color Space ....................................34
Color Temp  .....................................34
Connecting example: Computers ...23
Connecting terminals ......................17
Connecting the power cord.............24
Connections....................................22
Contrast  ..........................................33
Control panel  ..................................16
D
Digital Zoom  ...................................36
Dimensions .....................................57
Disposal ..........................................11
G
Gamma  ...........................................34
H
High Altitude  ...................................41
How to adjust the state of  
the image ....................................27
H Position  .......................................35
Hue .................................................34
I
ID numbers .....................................18
Image select  ...................................37
Information......................................41
Input................................................40
Installing and Removing battery .....18
In standby mode .............................39
L
Lamp Settings.................................40
Lamp unit ........................................44
Language........................................37
List of compatible signals  ...............53
M
Maintenance/replacement ..............43
Menu Location ................................37
Menu Tree  ......................................31
Mute................................................39
O
ON(G)/STANDBY(R) indicator ........25
Optional accessories  ......................13
Other terminals ...............................52
P
Parts for ceiling mount (Optional) ...19
Phase  .............................................35
Powering Off the Projector  .............26
Powering On the Projector .............26
Precautions for Use ........................10
Projection method...........................19
Projector body  ................................15
R
Read this first!...................................2
Real ................................................33
Remote control ...............................14
Remote ID  ......................................38
Replacing the Lamp unit .................45
Reset  ..............................................38
S
Saturation .......................................34
Screen size and throw distance......20
Security...........................................11
Selecting the input signal................27
Serial terminal.................................49
Setting the ID number.....................18
Setting up  .......................................19
Sharpness ......................................34
Specifications .................................55
Startup Logo ...................................38
T
Test Pattern  ....................................37
Troubleshooting ..............................46
V
VGA Out (Standby) .........................37
V Keystone  .....................................36
Volume............................................39
V Position  .......................................36
W
Wall color ........................................33 
						

							M0613HY0 -ST
Information for Users on Collection and Disposal of Old Equipment and us\
ed Battery
These symbols on the products, packaging, and/or accompanying documents mean that used 
electrical and electronic products and battery should not be mixed with general household waste. 
For proper treatment, recovery and recycling of old products and used ba\
ttery, please take them 
to applicable collection points, in accordance with your national legislation and the Directives 
2002/96/EC and 2006/66/EC.
By disposing of these products and battery correctly, you will help to save valuable resources 
and prevent any potential negative effects on human health and the environment which could 
otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and \
battery, please contact 
your local municipality, your waste disposal service or the point of sale where you purchased the 
items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national 
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier 
for further information.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union. If you wish to discard these items, please 
contact your local authorities or dealer and ask for the correct method \
of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with 
the requirement set by the Directive for the chemical involved.
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2013
Panasonic Corporation