Panasonic LCD Projector Pt Lx300 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector Pt Lx300 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
Appendix
ENGLISH - 51
Appendix
Control commands J
When controlling the projector from a computer, the following commands are available:
[Projector control command]
CommandControl contentsRemarks
PONPower [ON]
POFPower [OFF]
IISINPUT selection
(Parameter)
VID = Video
RG = Computer
HD1 = HDMI
OSHAV mute function
Turning off the projection and sound temporarily.
Sending the command switches [ON]/[OFF].
Do not switch ON/OFF in a short period of time.
AMTVolume mute function0 = OFF
1 = ON
QPWPower query000 =...](http://img.usermanuals.tech/thumb/58/75986/w300_pt-lx300_en_om_d-50.png "Page 51
Appendix
ENGLISH - 51
Appendix
Control commands J
When controlling the projector from a computer, the following commands are available:
[Projector control command]
CommandControl contentsRemarks
PONPower [ON]
POFPower [OFF]
IISINPUT selection
(Parameter)
VID = Video
RG = Computer
HD1 = HDMI
OSHAV mute function
Turning off the projection and sound temporarily.
Sending the command switches [ON]/[OFF].
Do not switch ON/OFF in a short period of time.
AMTVolume mute function0 = OFF
1 = ON
QPWPower query000 =...")
Appendix ENGLISH - 51 Appendix Control commands J When controlling the projector from a computer, the following commands are available: [Projector control command] CommandControl contentsRemarks PONPower [ON] POFPower [OFF] IISINPUT selection (Parameter) VID = Video RG = Computer HD1 = HDMI OSHAV mute function Turning off the projection and sound temporarily. Sending the command switches [ON]/[OFF]. Do not switch ON/OFF in a short period of time. AMTVolume mute function0 = OFF 1 = ON QPWPower query000 =...
Page 52
Appendix 52 - ENGLISH Appendix Other terminals Pin assignments and signal names of J terminal Outside viewPin No.Signal names : Not assigned - , , : GND terminals R/PR G/G SYNC/Y B/PB + 5 V DDC data HD/SYNC VD DDC clock Pin assignments and signal names of terminal J Outside viewPin No.Signal names , , , , : Not assigned - , : GND terminals R/PR G/G SYNC/Y B/PB HD/SYNC VD Pin assignments and signal names of terminal J Outside viewPin No.Signal namesPin No.Signal names T.M.D.S data 2+T.M.D.S...
Page 53
Appendix ENGLISH - 53 Appendix List of compatible signals The following table specifies the types of signals compatible with the projectors. Format : V = VIDEO, R = RGB, Y = YPBPR, H = HDMI ModeDisplay resolution *1 (dots) Scanning frequencyDot clock frequency (MHz)Format Plug and play *3 H (kHz)V (Hz)COMPUTERHDMI NTSC/NTSC4.43/ PAL-M-15.7559.9-V-- PAL/PAL-N/ SECAM-15.6350.0-V-- 525i (480i) 720 x 480i15.7359.913.50Y-- 720(1 440) x 480i (*2)15.7359.927.00H-o 625i (576i) 720 x 576i15.6350.013.50Y-- 720(1...
Page 54
Appendix 54 - ENGLISH Appendix ModeDisplay resolution *1 (dots) Scanning frequencyDot clock frequency (MHz)Format Plug and play *3 H (kHz)V (Hz)COMPUTERHDMI SXGA1 280 x 1 024 63.9860.0108.00R/Hoo 79.9875.0135.00R/Hoo 91.1585.0157.50R/H-- 1366x7681 366 x 76847.7259.884.75R/Hoo SXGA+1 400 x 1 05065.3260.0121.75R/Hoo UXGA1 600 x 1 20075.0060.0162.00R/Hoo *1: “i” added to the resolution value indicates an interlaced signal. *2: HDMI signal of 480i and 576i is only supported by 27 MHz Dot clock signal. *3:...
Page 55
![Page 55
Specifications
ENGLISH - 55
Appendix
Specifications
Model No.PT- LX300EPT-LX270E
Power supplyAC 100 V -240 V 50/60Hz
Power consumption
100 V -240 V 2.7 A -1.0A, 218 W100 V -240 V 2.4 A -0.9A, 218 W
Standby power consumption
0.5 W When [VGA Out (Standby)]/[In Standby Mode (Audio)] are all set to [Off]. z
1.2 W When one or more among [VGA Out (Standby)]/[In Standby Mode (Audio)] is/are z
set to [On].
DLP panel
Panel size14.0 mm (0.55")
(Aspect ratio 4:3)
Display
methodDLP chip
Pixels786 432...](http://img.usermanuals.tech/thumb/58/75986/w300_pt-lx300_en_om_d-54.png "Page 55
Specifications
ENGLISH - 55
Appendix
Specifications
Model No.PT- LX300EPT-LX270E
Power supplyAC 100 V -240 V 50/60Hz
Power consumption
100 V -240 V 2.7 A -1.0A, 218 W100 V -240 V 2.4 A -0.9A, 218 W
Standby power consumption
0.5 W When [VGA Out (Standby)]/[In Standby Mode (Audio)] are all set to [Off]. z
1.2 W When one or more among [VGA Out (Standby)]/[In Standby Mode (Audio)] is/are z
set to [On].
DLP panel
Panel size14.0 mm (0.55\")
(Aspect ratio 4:3)
Display
methodDLP chip
Pixels786 432...")
Specifications ENGLISH - 55 Appendix Specifications Model No.PT- LX300EPT-LX270E Power supplyAC 100 V -240 V 50/60Hz Power consumption 100 V -240 V 2.7 A -1.0A, 218 W100 V -240 V 2.4 A -0.9A, 218 W Standby power consumption 0.5 W When [VGA Out (Standby)]/[In Standby Mode (Audio)] are all set to [Off]. z 1.2 W When one or more among [VGA Out (Standby)]/[In Standby Mode (Audio)] is/are z set to [On]. DLP panel Panel size14.0 mm (0.55") (Aspect ratio 4:3) Display methodDLP chip Pixels786 432...
Page 56
![Page 56
Specifications
56 - ENGLISH
Appendix
Model No.PT-LX300EPT-LX270E
Terminals
COMPUTER IN
1 set, high-density D-Sub 15p (female)
[RGB signal]
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
SYNC/HD and VD are not compliant with 3 value composite SYNC
[YPBPR signal]
Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75...](http://img.usermanuals.tech/thumb/58/75986/w300_pt-lx300_en_om_d-55.png "Page 56
Specifications
56 - ENGLISH
Appendix
Model No.PT-LX300EPT-LX270E
Terminals
COMPUTER IN
1 set, high-density D-Sub 15p (female)
[RGB signal]
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
SYNC/HD and VD are not compliant with 3 value composite SYNC
[YPBPR signal]
Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75...")
Specifications
56 - ENGLISH
Appendix
Model No.PT-LX300EPT-LX270E
Terminals
COMPUTER IN
1 set, high-density D-Sub 15p (female)
[RGB signal]
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
SYNC/HD and VD are not compliant with 3 value composite SYNC
[YPBPR signal]
Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75...
Page 57
Specifications ENGLISH - 57 Appendix Dimensions Lens Center Lens Center 42.4 (1.67)44.3 (1.74) 88.2 (3.47) 100.6 (3.96) 3.7° Max. 286.3 (1 1.27) 192.0 (7.56) 110.0 (4.33) 55.0 (2.17) 82.3 (3.24) 77.8 (3.06) 57.8 (2.28) 77.0 (3.03) 167.7 (6.60) 11 8.7(4.67) 63.0 (2.48) 10.5 (0.41) 125.5 (4.94) Actual dimension may differ by product.:
Page 58
Ceiling mount bracket safeguards 58 - ENGLISH Appendix Ceiling mount bracket safeguards Installation work of the ceiling mount bracket should only be carried by a qualified technician. z Even if it is during guaranteed period, the manufacturer is not responsible for any hazard or damage caused z by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental conditions. Remove an unused ceiling mount bracket promptly. z Ensure to use a torque driver and do not...
Page 59
ENGLISH - 59 Appendix Index A About Your Projector.......................14 Accessories ....................................13 Adjusting the Projector's Height .....21 Adjusting the zoom and focus ........21 Aspect Ratio ...................................35 Auto Power Off (Min) ......................40 B Before cleaning/replacing the unit ..43 Before connecting to the projector..22 Brightness.......................................33 C Cautions on use..............................12 Cautions when...
Page 60
![Page 60
M0613HY0 -ST
Information for Users on Collection and Disposal of Old Equipment and us\
ed Battery
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and battery should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used ba\
ttery, please take them
to applicable collection points, in accordance with your national legislation and the Directives
2002/96/EC and 2006/66/EC....](http://img.usermanuals.tech/thumb/58/75986/w300_pt-lx300_en_om_d-59.png "Page 60
M0613HY0 -ST
Information for Users on Collection and Disposal of Old Equipment and us\
ed Battery
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and battery should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used ba\
ttery, please take them
to applicable collection points, in accordance with your national legislation and the Directives
2002/96/EC and 2006/66/EC....")
M0613HY0 -ST Information for Users on Collection and Disposal of Old Equipment and us\ ed Battery These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and battery should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used ba\ ttery, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC....