Panasonic LCD Projector Pt Lw321 Operating Instructions

ENGLISH - 41
Settings
Select [Options] from the Main Menu (see “How 
to operate menu” on page 31) and then select 
the item from the Sub Menu.
Auto Source
Set the automatic signal search function  when power 
on or the source of the signal being received is lost.
Press ▲▼ to select [Auto Source].1 ) 
Press ► to display the setting dialog box.2 ) 
Press ◄► to switch [On]/[Off].3 ) 
On
It will automatically search and 
display the signal sources marked 
in the [Input] when power on or the 
source of the...

Options
42 - ENGLISH
Settings
Attention
If [Lamp Life Reminder] is set to [Off], the lamp warning  z
message will not be displayed when the lamp used time 
reaches the end of lamp life. In this case, please check 
the lamp life with the values at the [Lamp Hours Used 
(Normal)] and [Lamp Hours Used (ECO)].
Lamp Power Mode J
Selects desired lamp power mode under  z
different situations.
Press ▲▼ to select [Lamp Power Mode].1 ) 
Press ► to display the setting dialog box.2 ) 
Press ◄► to select the desired...

LAN
ENGLISH - 43
Settings
Select [LAN] from the Main Menu (see “How to 
operate menu” on page 31) and then select the 
item from the Sub Menu.
Note
The following settings are set before the projector leaves  z
the factory.
DHCPOff
IP Address1 9 2 .1 6 8 .1 0 .1 0 0
Subnet Mask255.255.255.0
Gateway1 9 2 .1 6 8 .1 0 .1
DNS0.0.0.0
If you want to use a DHCP server, please make sure that  z
the DHCP server is enabled.
For more information about the IP Address, Subnet  z
Mask, Gateway, and DNS, please contact...

LAN
44 - ENGLISH
Settings
Store
Save the network settings.
Press ▲▼ to select [Store].1 ) 
Press ► to display the setting dialog 2 ) 
box.
Press ▲▼ to switch [Yes]/[No].3 ) 
Press ► to execute.4 ) 
Select [Yes] to start executing and the resetting  z
message appears. The store procedure finishes 
when the message disappears.
Reset
Return all data that has been set in the [LAN] menu to 
the factory defaults.
Press ▲▼ to select [Reset].1 ) 
Press ► to display the setting dialog 2 ) 
box.
Press ▲▼ to switch...

LAN
ENGLISH - 45
Settings
The projector has a network function, and the following operations are a\
vailable from the computer using the web 
browser control.
Setting and adjustment of the projector. z
Display of the projector status. z
Transmission of an E-mail message when there is a problem with the projec\
tor. z
This projector supports "Crestron RoomView" and the following application software from Crestron company. 
(Æpage 49)
RoomView Express z
Attention
Connects LAN to indoor equipment....

LAN
46 - ENGLISH
Settings
Computer operation via network
Connection can be made with wired LAN. However, confirm to your system administrator on network settings 
before changing any settings.
Turn on the computer.1 ) 
Make the network setting according to your system administrator.2 ) 
If the projector settings are the default settings (Æpage 43), the computer can be used with the following 
network settings.
DHCPOff
IP Address1 9 2 .1 6 8 .1 0 .1 0 1
Subnet Mask255.255.255.0
Gateway1 9 2 .1 6 8 .1 0...

LAN
ENGLISH - 47
Settings
Main Menu description J
Projector Information J
Displays basic information of the projector.
 
 
 
LAN Setting J
Sets the LAN Setting of the projector and press [Save] to store settings.
 
 
Attention
For the security reason, do not enter any information that third party can recognize your location or name, in [Location] and  z
[Contact] columns.
(1)
(2)
(1) Projector Information
 Confirm Projector Information.
 Displays lamp use time [Lamp Hours] 
(corresponding value) and...

LAN
48 - ENGLISH
Settings
Projector Status and Control J
Sets the projector status and adjusts Image and Audio controls.
E-mail Setting J
Sets E-mail Alert and SMTP Setting and Alert Condition of the projector and press [Save] to store settings.
Note
The E-mail function of this projector does not compatible  z
with the advanced SMTP server. 
Security Setting J
Sets a password for the administrator to manage the Web.
(1)
(2)
(3)
(1)
(1)  [Administrator]
 When set the password, click [Enable] and enter...

LAN
ENGLISH - 49
Settings
"Crestron RoomView" is a system developed by Crestron Electronics, Inc. which collectively manage and 
control multiple system devices connected via the network, from a comput\
er.
For details of "Crestron RoomView", refer to the Crestron Electronics, Inc. website (Provided only in 
English). 
http://www.crestron.com/ 
For the download of "RoomView Express", refer to the Crestron Electronics, Inc. website (Provided only in 
English)....

About indicator status
50 - ENGLISH
Maintenance
Maintenance
About indicator status
If an indicator turns on
If a problem should occur inside the projector, the  and/or   indicators will inform you. Manage 
the indicated problems as follow.
Attention
Before you take a remedial measure, follow the procedure of switching th\
e power off indicated in “Powering off the  zprojector”. (Æpage 27)Confirm the status of the power indicated on the  indicator. ( zÆpage 26)
 indicator indicator
 indicator J
Indicator...