Panasonic LCD Projector Pt Lw321 Operating Instructions

							ENGLISH - 41
Settings
Select [Options] from the Main Menu (see “How 
to operate menu” on page 31) and then select 
the item from the Sub Menu.
Auto Source
Set the automatic signal search function  when power 
on or the source of the signal being received is lost.
Press ▲▼ to select [Auto Source].1 ) 
Press ► to display the setting dialog box.2 ) 
Press ◄► to switch [On]/[Off].3 ) 
On
It will automatically search and 
display the signal sources marked 
in the [Input] when power on or the 
source of the signal being received 
is lost.
OffWhen the source of the signal being received is lost, it will not search other sources.
Search and display order: [Computer 1]  z 
[Computer 2]  [HDMI]  [Video]  
[Computer 1] .
Input
Set the automatic search signal source for [Auto 
Source].
Press ▲▼ to select [Input].1 ) 
Press ► to display the setting dialog box.2 ) 
The [Input] menu dialog box is displayed. z
Press ▲▼ to select the input you want 3 ) 
to search and press ►.
The input with a check mark will be able to be  z
searched when [Auto Source] is set to [On]. 
To remove the check mark, choose the desired  z
item and press ►.
Auto Power Off (Min)
Set the time to automatically turn off the projector  
when there is no signal input.
Press ▲▼ to select [Auto Power Off 1 ) 
(Min)].
Press ► to display the adjustment 2 ) 
dialog box.
Press ◄► to adjust off timer (min).3 ) 
When this function is set to [0 (min)], it is disable. z
You can set the time in 5 minutes intervals and  z
the longest set time is 120 minutes.
Note
60 seconds before the auto power off, the countdown  z
screen will appear. During countdown, the screen will 
disappear if there is signal input or operation to the 
projector.
Lamp Settings
Displays and sets detail of the lamp settings.
Press ▲▼ to select [Lamp Settings].1 ) 
Press ► to display the setting dialog 2 ) 
box.
Lamp Hours Used (Normal) J
Displays the used lamp hours under [Normal]  z
lamp power mode.
Lamp Hours Used (ECO) J
Displays the used lamp hours (in real time)  z
under [Auto] / [ECO1]([ECO]) / [ECO2] lamp 
power mode. The time is displayed as the sum 
of the time under each setting of [Auto], [ECO1]
([ECO]) and [ECO2] lamp power mode.
Lamp Life Reminder J
Press ▲▼ to select [Lamp Life 1 ) 
Reminder].
Press ► to display the setting dialog box.2 ) 
Press ◄► to switch [On]/[Off].3 ) 
OnDisplays the lamp warning 
message. (Æpage 53)
OffThe warning lamp message will 
not be displayed.
Options 
						

							Options
42 - ENGLISH
Settings
Attention
If [Lamp Life Reminder] is set to [Off], the lamp warning  z
message will not be displayed when the lamp used time 
reaches the end of lamp life. In this case, please check 
the lamp life with the values at the [Lamp Hours Used 
(Normal)] and [Lamp Hours Used (ECO)].
Lamp Power Mode J
Selects desired lamp power mode under  z
different situations.
Press ▲▼ to select [Lamp Power Mode].1 ) 
Press ► to display the setting dialog box.2 ) 
Press ◄► to select the desired item.3 ) 
NormalNormal brightness.
Auto
The brightness level of the content is 
automatically detected to significantly 
reduced lamp power consumption 
during periods of inactivity.
ECO1 / 
ECO *1
Lower brightness reduces the lamp 
power consumption and extends the 
lamp life.
ECO2*1Lowest brightness reduces the lamp 
power consumption and extends the 
lamp life.
*1: Normal / Auto / ECO1 / ECO2 for PT-LX351E.
     Normal / Auto / ECO for PT-LW321E / PT-   
     LW271E / PT-LX321E / PT-LX271E.
Note
When there is no signal for more than 5 minutes, the  z
lamp power will be decreased automatically for power 
saving.
Clear Lamp Hours J
Reset the lamp usage time after replacing the  z
lamp unit. 
Press ▲▼ to select [Clear Lamp Hours].1 ) 
Press ► to display the setting dialog box.2 ) 
Press 3 ) ▲▼ to switch [Yes]/[No]. 
Press ► to execute.4 )  
High Altitude
Set to [On] when the projector is used at elevation 
approx. 1 000 m (3 300 ft) and approx. 3 000 m  
(10 000 ft).
Press ▲▼ to select [High Altitude].1 ) 
Press ► to display the adjustment 2 ) 
dialog box.
Press ◄► to switch [On]/[Off].3 ) 
On
For the elevation approx. 1 000 m  
(3 300 ft) and approx. 3 000 m  
(10 000 ft).
OffFor the elevation below approx.  
1 000 m (3 300 ft).
Note
When [On] is selected, the speed and the noise of the  zfan will increase.
Dust Filter Reminder 
Set the cleaning cycle of the filters and reset the use 
time of the filters.
Press ▲▼ to select [Dust Filter 1 ) 
Reminder].
Press ► to display the setting dialog box. 2 ) 
Filters Remind (Hour) J
Set the timer to display the Dust Filter Reminder  z
message (Æpage 51).
Press ▲▼ to select [Filters Remind 1 ) 
(Hour)].
Press ► to display the adjustment 2 ) 
dialog box.
Press ◄► to set the time.3 ) 
The factory default is 0 hour. z
You can set the time in 50 hours intervals and  z
the longest set time is 1 000 hours.
Cleaning up Reminder J
Reset the air filter used time to zero. z
Reset the air filter hour counter after cleaning  z
or replacing the dust filter. 
Press ▲▼ to select [Cleaning up 1 ) 
Reminder].
Press ► to display the setting dialog box.2 ) 
Press ▲▼ to switch [Yes]/[No].3 ) 
Press ► to execute.4 ) 
Note
It is recommended to clean the air filters regularly every  z500 hours of usage.
Information
Displays the input signal source and setting state 
information of the projector.
Press ▲▼ to select [Information].1 ) 
Press ► to display the information 2 ) 
dialog box.
Displays [Model Name], [Source], [Resolution],  z
[Software Version], [Color Space] and [Aspect Ratio]. 
						

							LAN
ENGLISH - 43
Settings
Select [LAN] from the Main Menu (see “How to 
operate menu” on page 31) and then select the 
item from the Sub Menu.
Note
The following settings are set before the projector leaves  z
the factory.
DHCPOff
IP Address1 9 2 .1 6 8 .1 0 .1 0 0
Subnet Mask255.255.255.0
Gateway1 9 2 .1 6 8 .1 0 .1
DNS0.0.0.0
If you want to use a DHCP server, please make sure that  z
the DHCP server is enabled.
For more information about the IP Address, Subnet  z
Mask, Gateway, and DNS, please contact your network 
administrator.
DHCP
Set whether to use DHCP server.
Press ▲▼ to select [DHCP].1 ) 
Press ► to display the setting dialog 2 ) 
box.
Press ▲▼ to switch [On]/[Off].3 ) 
Press  button to exit the switching and  z
go back to the previous menu.
Press ► to confirm.4 ) 
After selecting [On], the message about LAN  z
restarting will be displayed. The setting of 
DHCP finishes when the message disappears.
Press  to exit. 5 ) 
 
 
OnThe projector will acquire the IP 
address automatically.
Off
User must set the [IP Address], 
[Subnet Mask], [Gateway] and 
[DNS] manually.
IP Address
Select an IP Address of projector connected to 
network.
Press ▲▼ to select [IP Address].1 ) 
Press ► to display the setting dialog 2 ) 
box.
Press ▲▼◄► to input digit numbers.3 ) 
Press  to exit.4 ) 
Subnet Mask
Select Subnet Mask of projector for network 
connection.
Press ▲▼ to select [Subnet Mask].1 ) 
Press ► to display the setting dialog 2 ) 
box.
Press ▲▼◄► to input digit numbers.3 ) 
Press  to exit.4 ) 
Gateway
Select Gateway of projector for network connection.
Press ▲▼ to select [Gateway].1 ) 
Press ► to display the setting dialog box.2 ) 
Press ▲▼◄► to input digit numbers.3 ) 
Press  to exit.4 ) 
DNS
Select DNS of projector for network connection.
Press ▲▼ to select [DNS].1 ) 
Press ► to display the setting dialog 2 ) 
box.
Press ▲▼◄► to input digit numbers.3 ) 
Press  to exit. 4 ) 
 
 
 
 
 
LAN 
						

							LAN
44 - ENGLISH
Settings
Store
Save the network settings.
Press ▲▼ to select [Store].1 ) 
Press ► to display the setting dialog 2 ) 
box.
Press ▲▼ to switch [Yes]/[No].3 ) 
Press ► to execute.4 ) 
Select [Yes] to start executing and the resetting  z
message appears. The store procedure finishes 
when the message disappears.
Reset
Return all data that has been set in the [LAN] menu to 
the factory defaults.
Press ▲▼ to select [Reset].1 ) 
Press ► to display the setting dialog 2 ) 
box.
Press ▲▼ to switch [Yes]/[No].3 ) 
Press ► to execute.4 ) 
Select [Yes] to start executing and the resetting  z
message appears. The reset procedure finishes 
when the message disappears. 
						

							LAN
ENGLISH - 45
Settings
The projector has a network function, and the following operations are a\
vailable from the computer using the web 
browser control.
Setting and adjustment of the projector. z
Display of the projector status. z
Transmission of an E-mail message when there is a problem with the projec\
tor. z
This projector supports "Crestron RoomView" and the following application software from Crestron company. 
(Æpage 49)
RoomView Express z
Attention
Connects LAN to indoor equipment. z
Set the [UART Mode] in the [Setting] menu to [LAN] before controlling the projector via  terminal. z
Note
A LAN cable is required to use the wired LAN function. z
Computer Projector
LAN cable (straight) LAN cable (straight)
Hub
Connect to Network
A Web browser is required to use this function. Confirm that the Web browser can be used beforehand.  z
Compatible OS : Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6/v10.7  
Compatible Web Browser : Internet Explorer 7.0/8.0/9.0, Safari 4.0/5.0 (Mac OS)
Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be  z
used beforehand.
Use shielded LAN cable (STP cable) that is compatible with category 5 or above. z
Use a LAN cable with length of 100 m or shorter. z
Name and function of network function parts  J
(1)   
ACT lamp (yellow)
 Blinks when the LAN network function acts 
normal.
(2)   LAN terminal (10BASE-T/100BASE-TX)
Used to connect the LAN cable here.
(3)   LINK lamp (green)
Lights on when connected to network.
(1)(2)(3) 
						

							LAN
46 - ENGLISH
Settings
Computer operation via network
Connection can be made with wired LAN. However, confirm to your system administrator on network settings 
before changing any settings.
Turn on the computer.1 ) 
Make the network setting according to your system administrator.2 ) 
If the projector settings are the default settings (Æpage 43), the computer can be used with the following 
network settings.
DHCPOff
IP Address1 9 2 .1 6 8 .1 0 .1 0 1
Subnet Mask255.255.255.0
Gateway1 9 2 .1 6 8 .1 0 .1
DNSNONE
Web Management
Start the WEB browser of the computer.1 ) 
URL input box of the WEB browser and the IP Address setting of the projector. 2 ) 
Enter password.3 ) 
Input the administrator password. ( zÆpage 48) 
Click Login button.4 ) 
Display [Projector Information] page. z 
Select page menu on the left to display detail page. z
Note
 
For security reason, set an administrator password for the Web Management and restrict the users who can log in.  z
(Æpage 48)
Network connection will be disconnected when you cut off the power, such as unplug the power cord. When you want to  z
operate the WEB browser after reconnecting the power, please press [F5] on the keyboard to refresh your browser. 
						

							LAN
ENGLISH - 47
Settings
Main Menu description J
Projector Information J
Displays basic information of the projector.
 
 
 
LAN Setting J
Sets the LAN Setting of the projector and press [Save] to store settings.
 
 
Attention
For the security reason, do not enter any information that third party can recognize your location or name, in [Location] and  z
[Contact] columns.
(1)
(2)
(1) Projector Information
 Confirm Projector Information.
 Displays lamp use time [Lamp Hours] 
(corresponding value) and projector running hour 
[Operation Hours].
(2) Language
   Select Web Management display language (21 
languages).
Switches languages among English / German /  z
French / Italian / Spanish / Dutch / Portuguese 
/ Japanese / Traditional Chinese / Simplified 
Chinese / Korean / Russian / Polish / Swedish / 
Arabic / Turkish / Norwegian / Czech /  
Hungarian / Kazakh / Thai. 
The On-screen Menu of Language of the 
projector can not be changed by the Web 
management menu.
(1)
(2)
(1)   [Model Name] [Projector Name] [Location] 
[Contact]
 Enter projector basic information and press [Save].
(2)   [DHCP] [Manual]
   Select [DHCP] when the DHCP client function is 
enable.
   [IP Address] [Subnet Mask] [Gateway]   
  [DNS]
   When DHCP server is unavailable, please select 
[Manual] and enter [IP Address], [Subnet Mask], 
[Gateway] and [DNS].
(3)   [Crestron Control System Device]
   Enter [IP Address], [Device ID] and [Port] when 
Crestron RoomView is in use and press [Save].
(3)
(1)
(2)
(3)
(4)
(5)
(1) Projector Information
 Click this item and the [Projector Information] 
displays.
(2) LAN Setting 
 Click this item and the [LAN Setting] displays.
(3) Projector Status and Control
 Click this item and the [Projector Status and 
Control] displays.
(4) E-mail Setting 
 Click this item and the [E-mail Setting] displays.
(5) Security Setting 
 Click this item and the [Security Setting] displays. 
						

							LAN
48 - ENGLISH
Settings
Projector Status and Control J
Sets the projector status and adjusts Image and Audio controls.
E-mail Setting J
Sets E-mail Alert and SMTP Setting and Alert Condition of the projector and press [Save] to store settings.
Note
The E-mail function of this projector does not compatible  z
with the advanced SMTP server. 
Security Setting J
Sets a password for the administrator to manage the Web.
(1)
(2)
(3)
(1)
(1)  [Administrator]
 When set the password, click [Enable] and enter 
both of [New Password] and [Confirm Password] {4 
characters in single byte (0~9, A~Z, a~z)}, and then 
click [Submit].
(1)
(2)
(3)
(1)   [Projector Status]
 Confirm Projector Status.
 Press [Refresh] button to refresh.
 Press [Power ON] or [Power OFF] button to operate 
power status.
 Set the time for the projector to shut down 
automatically when there is no signal input in [Power 
Saving].  
 Confirm the [Alert status] of abnormal conditions.
(2)   [Image Control]
   Adjust projector image.
   Use the [Auto Adjust] button to adjust image to the 
best position and size.
(3)   [Audio Control]
   Adjust projector volume.
(1)   [E-mail Alert]
 Click [Enable] when using the E-mail function.
 Login [TO], [CC], [From] of the E-mail address to 
enable the abnormal E-mail notification.
 {up to 40 characters in single byte (15+@+24)}
 You can enter [Subject] information such as the 
location of the projector that notifies the sender of the 
E-mail. (up to 30 characters in single byte )
(2)   [SMTP Setting]
   Login [Out going SMTP server]  
(up to 30 characters in single byte )
(3)   [Alert Condition]
  Login [Lamp warning], [Lamp life reminder], 
[Temperature warning] of the Alert Condition to 
enable the abnormal E-mail notification. (Æpage 58) 
						

							LAN
ENGLISH - 49
Settings
"Crestron RoomView" is a system developed by Crestron Electronics, Inc. which collectively manage and 
control multiple system devices connected via the network, from a comput\
er.
For details of "Crestron RoomView", refer to the Crestron Electronics, Inc. website (Provided only in 
English). 
http://www.crestron.com/ 
For the download of "RoomView Express", refer to the Crestron Electronics, Inc. website (Provided only in 
English). 
http://www.crestron.com/getroomview
RoomView Express image example
  
The following picture is the start example of the downloaded [RoomV iew Express] after installation.
  For detail operation, please refer to [RoomView Help File].
 JCrestron RoomView Control Tool 
						

							About indicator status
50 - ENGLISH
Maintenance
Maintenance
About indicator status
If an indicator turns on
If a problem should occur inside the projector, the  and/or   indicators will inform you. Manage 
the indicated problems as follow.
Attention
Before you take a remedial measure, follow the procedure of switching th\
e power off indicated in “Powering off the  zprojector”. (Æpage 27)Confirm the status of the power indicated on the  indicator. ( zÆpage 26)
 indicator indicator
 indicator J
Indicator statusStatusCheckRemedy
Lights in redTemperature too high
Is the air intake/exhaust port blocked?Remove any objects that are blocking the air intake/exhaust port.
Are the air filters blocked?See air filters cleaning or replacing. (Æpages 51-53)
Is the room temperature high?Set up the projector in a location with an ambient temperature of 5°C (41°F) to 40°C  (104°F)*.
Is the projector used above the altitude of  1 000 m (3 300 ft) ? 
-  Use the projector between the altitude approx. 1 000 m  
(3 300 ft) and approx. 3 000 m (10 000 ft) and set [High Altitude] 
to [On]. (Æpage 42)-  Do not use the projector at elevations approx. 3 000 m (10 000 ft).
Blinks in redThe fan has stopped--Disconnect the power plug from the power outlet and contact your dealer.
*   For the elevations below approx. 750 m (2 500 ft). When using the projector at the elevations between approx. 
750 m (2 500 ft) and approx. 1 500 m (5 000 ft) sea level, temperature will be 5°C (41°F) to 35°C (95°F). When 
using the projector at the elevations between approx. 1 500 m (5 000 ft) and approx. 3 000 m (10 000 ft) sea 
level, temperature will be 5°C (41°F) to 30°C (86°F).
 indicator J
Indicator statusStatusCheckRemedy
Lights in redLamp does not light; or lights out during projection
Does the projector be turned on immediately after powering off?Turn on the projector until the lamp has completely cooled down.
Lamp unit failure; abnormal lamp power; lamp brokenDisconnect the power plug from the power outlet, and contact your dealer.
Note
When re-start the projector, turn off the projector, unplug the power cord, and then wait 30 seconds or more before  zreconnecting power.If the  indicator lights or flashes or the  indicator lights despite taking the actions above, plug out the  AC  zpower cord, and contact your dealer for repair.