Panasonic LCD Projector PT-LB60NTU PT-LB60U Operating Instructions

ENGLISH-41
Adjustments and settings
The mode best used in dark rooms
is “NATURAL”. For rooms having
regular lighting conditions in use,
select “STANDARD”. For
exceptionally bright rooms, use
“DYNAMIC”.
“BLACKBOARD” is available only
when “BLACKBOARD” in the
“OPTION” menu is set to “ON”.
Select “BLACKBOARD” when
projecting onto blackboards.
CONTRAST
This adjusts the contrast of the
picture. (Adjust the “BRIGHTNESS”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright:...

42-ENGLISH
DETAILED SETUP
You can adjust the picture quality of
the projected images in detail. Press
the ENTER button to display the
“DETAILED SETUP” menu.
WHITE BALANCE
RED/GREEN/BLUE
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colorised. 
To make the selected color lighter:
Ibutton 
To make the selected color stronger:
H button
NOTE:
B“AI” is disabled when “LAMP
POWER” is set to “ECO-
MODE”. (Refer to page 50.)
NOTE:
B“AUTO” may not function
correctly if any...

ENGLISH-43
Adjustments and settings
NOISE REDUCTION
(S-VIDEO/VIDEO only)
If the signal is of such poor quality
that picture interference appears,
set “NOISE REDUCTION” to “ON”.
To turn off the “NOISE
REDUCTION” feature, set to “OFF”.
STILL MODE
(S-VIDEO/VIDEO only)
To reduce flickering of still images
(vertical flicker), set “STILL MODE”
to “ON”. This should normally be set to
“AUTO”. If the signal is of such poor
quality that the correct format
cannot be automatically
distinguished, change the setting...

44-ENGLISH
REALTIME KEYSTONE
This projector detects its own
degree of tilt and corrects the
keystone distortion automatically. 
ON
“REALTIME KEYSTONE” is
enabled.
OFF
“REALTIME KEYSTONE” is
disabled.
KEYSTONE
This projector detects its own
degree of tilt and corrects the
keystone distortion automatically
(“REALTIME KEYSTONE” ).
However, keystone distortion may
still affect the images in some cases
(e.g. when the projector is tilted
slightly and the tilt is corrected
slowly by hand or when the screen...

ENGLISH-45
Adjustments and settings
POSITION
(S-VIDEO/VIDEO/RGB/YPBPRonly)
Moves the picture position.
Press the ENTER button to display the
“POSITION” screen.
Press the  Ior H button to move the
picture horizontally.
Press the  For G button to move the
picture vertically.
DOT CLOCK
(RGB only)
Periodic striped pattern interference
(noise) may occur when a striped
pattern such as the one below is
projected. If this happens, press the
I or H button to adjust so that any
such noise is minimised.
CLOCK...

46-ENGLISH
CLOCK” and “CLOCK PHASE”
adjustments are carried out.S4:3
The size of the input signal is
compressed to 75% and projected.
(This is useful for projecting a
picture with a 4:3 aspect ratio onto a
16:9 screen.)
AUTO
(S-VIDEO only)
When an S1 video signal is being
input, the aspect ratio is changed
automatically to project a 16:9
picture.
4:3
The input signal is projected without
change.
16:9
The picture is compressed to a ratio
of 16:9 and projected.

S1 video signals
BS1 video signals are a...

ENGLISH-47
Adjustments and settings
RESIZING
(S-VIDEO/VIDEO/RGB/YPBPRonly)
This should normally be set to “ON”.
(This setting is only for signals
which have lower resolutions than
the LCD panels. Refer to page 68
for details.)
ON
The pixel resolution of the input
signal is converted to the same
resolution as the LCD panels before
being projected. 
This may sometimes cause
problems with the quality of the
picture.
OFF
The input signal is projected at its
original resolution, with no pixel
conversion. The...

48-ENGLISH
Changing the display language
#Press the MENU button to display the menu screen.
$ Select the “LANGUAGE” menu from the main menu, and then press
the ENTER button.
% Press the  F
F
or G
G
button to select a language, and then press the
ENTER button.

1/2
G

Indicates the language which
is currently set

2/2F

F   G 

ENGLISH-49
Adjustments and settings
Option settings
#Press the MENU button to display the menu screen.
$ Select the “OPTION” menu from the main menu, and then press the
ENTER button.
% Press the F or Gbutton to select an item.
& Press the I or Hbutton to change the setting. For “DETAILED
SETUP”, press the ENTER button to display the next screen.
DETAILED
The input signal information will be
displayed in detail.
OFF
The input signal information will not
be displayed.
SIMPLE
Only the name of the input...

50-ENGLISH
LAMP POWER
This setting changes the lamp
brightness. When set to “ECO-
MODE”, the luminance of the lamp
is reduced, but the projector uses
less power, and the operating noise
is also reduced. This can help to
extend the lamp’s operating life. If
using the projector in small rooms
where high luminance is not
required, it is recommended that
you set the “LAMP POWER” to
“ECO-MODE”.
LAMP RUNTIME
This setting displays the usage time
for the lamp unit which is currently
being used. When replacing...