Panasonic LCD Projector PT-L785U Operating Instructions

							ENGLISH-31
Useful functions
Adjusting the zoom and focus (LENS)
Press the LENS button.VIDEORGB
ALL SET
A
BPress the Ior Hbutton  to adjust the size of
the projected image.
BPress the For Gbutton to adjust the focus of
the projected image.
;00.0$64áàâã
NOTE:
B“ZOOM/FOCUS” in the “LENS” menu is the
same function. 
						

							32-ENGLISH
Useful functions of the remote control unit
Laser beam pointer
The laser beam emitted from the remote control can be used as a pointer by
pointing forward to the screen.
While the LASER button is being pressed, the laser beam is being emitted
and the operating indicator illuminates.
Do not look into the laser emitter of the remote control unit or point the laser
beam towards other people, otherwise damage to eyes may occur.
Caution
BUse of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
BThis remote control unit cannot be repaired.
VIDEORGB
ALL SET
A
Warning
BDO NOT STARE INTO THE LASER
BEAM OR AIM IT AT ANY PERSON'S
EYE. LASER RADIATION CAN CAUSE
SERIOUS INJURY TO THE HUMAN EYE.
Laser transmitter window 
						

							ENGLISH-33
Useful functions
Wireless mouse
By connecting the wireless mouse receiver (ET-RMRC2, sold separately) to
a personal computer, you can use the remote control unit as a personal
computer mouse.
PAGE UP button
PAGE DOWN button ENTER button
Right click button
Click button
Mode switch
(Computer/Projector)
Mode switch (Computer/Projector)
Move the mode switch to the
“Computer” position.
BPAGE UP button
Functions as the Page Up
button on 
a personal computer
keyboard.
BPAGE DOWN button
Functions as the Page Down
button on 
a personal computer
keyboard.
BENTER button
Pressing the upper, lower, left
and right edges of this button
can move the cursor up, down,
left and right.
BRight click button
This button functions as the right
button on 
a personal computer
mouse.
BClick button
This button functions as the left
button on 
a personal computer
mouse.
VIDEORGB
ALL SET
A
Click button 
						

							34-ENGLISH
32
32
32
32
32
PICTUREPICTURE MODE
CONTRAST
BRIGHT
SHARPNESS
COLOR TEMP.
WHITE BALANCE R
WHITE BALANCE G
WHITE BALANCE B
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
  ESC:[MENU]STANDARD
STANDARD  6
PICTURE menu (page 39)
When an RGB/DVI signal is being 
input
On-screen menus
Menu screens
The various settings and adjustments for this projector can be carried out by
selecting the operations from on-screen menus.
The general arrangement of these menus is shown below.
32
32
32
 6 32
 1
PICTUREPICTURE MODE
CONTRAST
BRIGHT
COLOR
TINT
SHARPNESS
COLOR TEMP.
NR
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]STANDARD
STANDARD
When a YPBPRsignal is being input
AUTO 32
32
32
 6 32
 1
PICTUREPICTURE MODE
CONTRAST
BRIGHT
COLOR
TINT
SHARPNESS
COLOR TEMP.
NR
TV-SYSTEM
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]STANDARD
STANDARD
When an S-VIDEO/VIDEO signal is
being input
NOTE:
BKeystone distortion of the on-screen display will not be corrected.
BThis projector has unadjustable items and unusable functions
depending on the signal being input.
When an item cannot be adjusted or a function cannot be used, the
corresponding on-screen menu display does not appear, and the item
or function will not work even if the ENTER button is pressed. 
						

							ENGLISH-35
Adjustments and settings
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:  128     V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
POSITION menu (page 42)
When an RGB/DVI signal is being
input
POSITIONPOSITION
CLOCK PHASE
KEYSTONE
OSD POSITION
ASPECT
RESIZING
AUTO SETUP
STANDARDH:   64    V:   16
H:    0    V:    0
OFFON TOP LEFT
4:3
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]16
When a YPBPRsignal is being input
POSITIONPOSITION
KEYSTONE
OSD POSITION
ASPECT
RESIZING
AUTO SETUP
STANDARDH:   32    V:   16
H:    0    V:    0
OFFON TOP LEFT
4:3
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
“POSITION”, “DOT CLOCK” and
“CLOCK PHASE” are not displayed
when a DVI signal is being input.
When an S-VIDEO/VIDEO signal is
being input
AUDIOVOLUME
MUTE
OFFON 20
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
AUDIO menu (page 46)
LANGUAGE
SELECT:[^][@][{][}]
SELECT:[{][}]ESC:[MENU]
ENTER:[ENTER]
ENGLISH
DEUTSCH
FRANÇAISESPAÑOL
ITALIANO
LANGUAGE menu (page 46) 
						

							36-ENGLISH
OPTIONOSD
AUTO SEARCH
AUTO SIGNAL
RGB2 SELECT
RGB/YP
BPRVGA60/480p
BACK COLOR
CINEMA REALITY
NEXT PAGE @OFF
OFF
OFF
INPUT
RGB
VGA60
BLUE
OFFON
ON
ON
OUTPUT
YPBPR480p
BLACK
ON
SELECT:[^][@]
ADJUST:[{][}] ESC:[MENU]
OPTION menu (page 47)
10 H
OPTIONPREVIOUS PAGE ^
FRONT/REAR
DESK/CEILING
FAN CONTROL
LAMP POWER
LAMP RUN TIME
FUNC1
CONTROL KEY
SET ID
AUTO POWER OFF   FRONT
DESK
STANDARD
LOW
MUTE
OFFREAR
CEILING
HIGH
HIGH
KEYSTONE
ON
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]DISABLEALL
OFF
OFFON
ON
NETWORKNETWORK
HOSTNAME
WEB CONTROL
WEB STANDBY
WEB PASSWORD
MAC ADDRESS
SELECT:[^][@] ENTER:[ENTER]
ESC:[MENU]PROJECTOR
00:0B:97:41:00:00LAN1
NETWORK menu (page 50)
INVALID
OFF
OFFVALID
ON
ONSECURITY
PASSWORD SETTING
CHANGE PASSWORD
TEXT DISPLAY
CHANGE TEXT
LOGO DISPLAY
LOGO CLEAR
LOGO CAPTURE
SELECT:[^][@][{][}]
ADJUST:[{][}]ENTER:[ENTER]
  ESC:[MENU]
SECURITY menu (page 51)
LENS
ZOOM/FOCUS
LENS SELECT 
STANDARD
SELECT:[^][@] ENTER:[ENTER]
ESC:[MENU]
“RGB/YPBPR” is displayed when
an RGB/YP
BPRsignal is being
input.
LENS menu (page 50) 
						

							ENGLISH-37
Adjustments and settings
#Press the MENU button.
The menu screen will be displayed.
$Press the I
or H
button to select a menu.
The selected menu screen will then be displayed.
(Example: “POSITION” menu)
%Press the G
button to accept the selection.
You can select an item here. The selected item is
shown in yellow.
Projector control panel
Menu operation guide
32
32
32
32
32
PICTUREPICTURE MODE
CONTRAST
BRIGHT
SHARPNESS
COLOR TEMP.
WHITE BALANCE R
WHITE BALANCE G
WHITE BALANCE B
STANDARD
SELECT:[^][@]
SELECT:[{][}]ENTER:[ENTER]
  ESC:[MENU]STANDARD
STANDARD  6
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:  128     V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
SELECT:[{][}] ESC:[MENU]
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:  128     V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
NOTE:
BPress the MENU
button to return to
the previous
screen.
VIDEORGB
ALL SET
A
ENTER MENU 
						

							38-ENGLISH
&Press the F
or G
button to
select an item.
AFor the value adjusting items
Press the ENTER button to
display an individual adjustment
screen.
Press the Ior Hbutton to
adjust the setting.
Some items can be adjusted by
pressing the For Gbutton.
You can also adjust the bar-scale
items pressing the Ior Hbutton
in the menu screen.
BFor the selective items
Press the Ior Hbutton to select
the setting.
CFor the fixed items
Press the ENTER button, and the
function will work.Returning a setting to
the factory default
If you press the STD (standard)
button on the remote control unit,
you can return settings to the
factory default settings. However,
the operation of this function varies
depending on which screen is being
displayed.
B
When a menu screen is being
displayed
All items displayed will be returned
to their factory default settings.
BWhen an individual adjustment
screen is being displayed
Only the item displayed will be
returned to the factory default
setting.
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:  128     V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
ABC
DOT CLOCK32
POSITIONH:
V:128
32
RESIZINGOFFON
POSITIONPOSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARDH:  128     V:   32
H:    0    V:    0 32
16
OFF
OFFON
ON TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
DOT CLOCK32
NOTE:
BYou can also select
“STANDARD” from the menu
screen and then press the
ENTER button. 
						

							ENGLISH-39
Adjustments and settings
Press the For Gbutton on the
projector or remote control unit to
select an item, and then press the
Ior Hbutton to change the
setting.
For the value adjusting items, press
the ENTER button to display the
adjustment screen, and then press
the Ior Hbutton to make the
adjustment.
Adjusting the picture
NATURAL
STANDARD
DYNAMIC
PICTURE MODE
32
32
32
32
32
PICTUREPICTURE MODE
CONTRAST
BRIGHT
SHARPNESS
COLOR TEMP.
WHITE BALANCE R
WHITE BALANCE G
WHITE BALANCE B
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
  ESC:[MENU]STANDARD
STANDARD  6
When an RGB/DVI signal is being 
input
32
32
32
 6 32
 1
PICTUREPICTURE MODE
CONTRAST
BRIGHT
COLOR
TINT
SHARPNESS
COLOR TEMP.
NR
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]STANDARD
STANDARD
When a YPBPRsignal is being input
AUTO 32
32
32
 6 32
 1
PICTUREPICTURE MODE
CONTRAST
BRIGHT
COLOR
TINT
SHARPNESS
COLOR TEMP.
NR
TV-SYSTEM
STANDARD
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]STANDARD
STANDARD
When an S-VIDEO/VIDEO signal is
being input
Select the picture mode that best
matches the image source and
room conditions.
The mode best used in dark rooms
is “NATURAL”. For rooms having
regular lighting conditions in use,
select “STANDARD”. For
exceptionally bright rooms, use
“DYNAMIC”. 
						

							40-ENGLISH
CONTRAST
This adjusts the contrast of the
picture. (Adjust the “BRIGHT”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright: Ibutton
The picture is dark: Hbutton
BRIGHT
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: Ibutton
Dark areas are too solid: Hbutton
COLOR
(S-VIDEO/VIDEO/YPBPRonly)
The color is too deep: Ibutton
The color is too pale: Hbutton
TINT
(NTSC/NTSC 4.43/YPBPRonly)
This adjusts the flesh tones in the
picture.
The flesh tones are greenish: 
Ibutton
The flesh tones are reddish: 
Hbutton
SHARPNESS
To soften the picture details: 
Ibutton
To sharpen the picture details: 
Hbutton
COLOR TEMP.
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
Noise Reduction (NR)
(S-VIDEO/VIDEO/480i and 576i
YP
BPRonly)
If the signal is of such poor quality
that picture interference appears,
you can suppress this interference
by adjusting the “NR” (Noise
Reduction).
To turn off the “NR” feature (set the
value to “0”): 
Ibutton
To strengthen the effect: 
Hbutton
WHITE BALANCE R/G/B
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colorised. 
To make the selected color lighter:
Ibutton 
To make the selected color stronger:
Hbutton
STANDARD
HIGH
LOW