Panasonic LCD Projector PT-L711 PT-L701 PT-L701SD PTL511 PT-L501 Operating Instructions

Panasonic  RS-232 Protocol    for LCD Projector 99 
3.2 Replies 
 
When commands are sent to projector, the projector will respond in the following manner. 
 
1) Normal command receiving 
When the command is in the proper format and correct communications has been established 
between the controlling device and the projector, the projector will reply with the response 
information. 
 
2) Command receiving error (NO Response) 
If no response is transmitted from the projector, then check the communication...

Panasonic  RS-232 Protocol    for LCD Projector  10 10  4 The Command List 
 
 
No The Command Command Description 1 AUD Volume Down 2 AUU Audio Volume Up 3 AVL: Audio Volume Set 4 CPK Control Panel 5 DZD Digital Zoom Down 6 DZU Digital Zoom Up 7 IIS Input Select 8 KST Keystone 9 OAK Auto Keystone 10 OAR Auto RGB Input 11 OAS Auto Set-up 12 OAY Auto YPbPr 13 OBC Background Color 14 OCD Cursor Down 15 OCL Cursor Left 16 OCR Cursor Right 17 OCU Cursor Up 18 OEN Enter 19 OFC Function 1 20 OFZ Freeze 21 OGS...

Panasonic  RS-232 Protocol    for LCD Projector  11 11  No The Command Command Description 23 OIL Installation 24 OIX Index Window 25 OKS Keystone 26 OLG Language 27 OLP Lamp Power 28 ORF RGB Format 29 OMN Menu 30 ORZ Resizing 31 OSH Shutter 32 OST Standard 33 POF Power Off 34 PON Power On 35 QAK Query Auto Keystone 36 QAR Query Auto RGB Input 37 QAS Query Auto Set-up 38 QAV Query Volume Level 39 QAY Query Auto YPbPr 40 QBC Query Background Color 41 QCP Query Clock Phase Level 42 QDC Query Dot Clock...

Panasonic  RS-232 Protocol    for LCD Projector  12 12  No The Command Command Description 48 QHP Query H-Position Level 49 QIN Query Input Signal 50 QIX Query Index Window 51 QKS Query Keystone 52 QLG Query Language 53 QLP Query Lamp Power 54 QPM Query Picture Mode 55 QPW Query Power Condition 56 QRF Query RGB Format 57 QRZ Query Resizing 58 QSG Query Signal Mode 59 QSH Query Shutter 60 QSP Query Installation 61 QVB Query Brightness 62 QVC Query Color Level 63 QVP Query V-Position Level 64 QVR Query...

Panasonic  RS-232 Protocol    for LCD Projector  13 13  No The Command Command Description 72 VBR Brightness 73 VCN Contrast 74 VCO Color 75 VCP Clock Phase 76 VDC Dot Clock 77 VHP H-Position 78 VPM Picture Mode 79 VSG Signal Mode Set 80 VSR Sharpness 81 VSZ Video Size 82 VS1 S1 Signal 83 VTN Tint 84 VVP V-Position  85 VWB White Balance Blue 86 VWG White Balance Green 87 VWR White Balance Red     

Panasonic  RS-232 Protocol    for LCD Projector  14 14  5 Command Explanation 
 
The following tables are the layout for the individual command explanations. 
 
5.1 Details of Notation in Command Tables 
 
Name This indicates the name of the command. Syntax This indicates the syntax of the command. 
Parameters are also notated when they are necessary. The 
starting symbols in the command are [STX], and the 
concluding symbols in the command are [ETX], the symbols 
[ and ] are used for ease of explanation...

Panasonic  RS-232 Protocol    for LCD Projector  15 15  5.2 Audio Volume Down  (AUD) 
 
Name Audio Volume Down Syntax [STX]AUD[ETX] Function This command will step the Audio Volume down one 
notch Parameters None Response [STX]AUD[ETX] Interrupt Processing The Projector must be powered on for this command to 
be effective. Examples of Use [STX]AUD[ETX] Notes 
 If you want to step 5 steps the command must be sent 
5 times.  The range is from 0 to 63  
 
Projector Model to Command Compatibility 
 
Model...

Panasonic  RS-232 Protocol    for LCD Projector  16 16  5.3 Audio Volume UP  (AUU) 
 
 
Name Audio Volume Up Syntax [STX]AUU[ETX] Function This command will step the Audio Volume up one notch Parameters None Response [STX]AUU[ETX] Interrupt Processing The Projector must be powered on for this command to 
be effective. Examples of Use [STX]AUU[ETX] Notes 
 If you want to step 5 steps the command must be sent 
5 times.  The range is from 0 to 63  
 
Projector Model to Command Compatibility 
 
Model 
Number...

Panasonic  RS-232 Protocol    for LCD Projector  17 17  5.4 Audio Volume Set  (AVL) 
 
 
Name Audio Volume Set Syntax [STX]AVL:p1p2p3[ETX] Function This command set the Audio Volume to a set level. Parameters 000 – 063  Volume Adjustment Range Response [STX]AVL[ETX] Interrupt Processing The Projector must be powered on for this command to 
be effective. Examples of Use [STX]AVL:047[ETX] Notes 
 The adjustment range value 000 would be no volume 
and 063 would be maximum volume.  
 
Projector Model to...

Panasonic  RS-232 Protocol    for LCD Projector  18 18  5.5 Control Panel  (CPK) 
 
 
Name Control Panel Syntax [STX]CPK:p1[ETX] Function This command will enable or disable the controls on the 
top of the projector. Parameters Code       Description 
0 Disabled 
1 Enabled Response [STX]CPK[ETX] Interrupt Processing The Projector must be powered on for this command to 
be effective. Examples of Use [STX]CPK:0[ETX] will disable the Control Panel Notes 
 Commands can still be used to control the projector....