Home
>
Panasonic
>
Projector
>
Panasonic LCD Projector PT-L711 PT-L701 PT-L701SD PTL511 PT-L501 Operating Instructions
Panasonic LCD Projector PT-L711 PT-L701 PT-L701SD PTL511 PT-L501 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector PT-L711 PT-L701 PT-L701SD PTL511 PT-L501 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
RS-232C Protocol Manual For
LCD Projectors
PT-L711, PT-L701, PT-L701SD,
PTL511, and PT-L501
Version 1.0
Page 2
Revision List Date Revision Number Description 07/02/2001 1.0 Manual first release Panasonic Broadcast and Television Systems Company 3330 Cahuenga Blvd. West Los Angeles, CA 90068 Phone 323-436-3500 Web Site http\\www.panasonic.com
Page 3
Panasonic RS-232 Protocol for LCD Projector Table of Content 1 Introduction_________________________________________________5 2 Connection__________________________________________________6 2.1 Communication Parameters_________________________________6 2.2 Address level______________________________________________6 2.3 RS-232C Connection_______________________________________6 2.4 Cable Specifications________________________________________7 3...
Page 4
Panasonic RS-232 Protocol for LCD Projector 5.14 Background Color (OBC)________________________________27 5.15 Cursor Down (OCD)_____________________________________28 5.16 Cursor Left (OCL)______________________________________29 5.17 Cursor Right (OCR)_____________________________________30 5.18 Cursor Up (OCU)_______________________________________31 5.19 Enter (OEN)____________________________________________32 5.20 Function 1 (OFC)_______________________________________33 5.21 Freeze...
Page 5
Panasonic RS-232 Protocol for LCD Projector 5.45 Query Function (QFC)___________________________________58 5.46 Query Horizontal Frequency (QFH)________________________59 5.47 Query Vertical Frequency (QFV)__________________________60 5.48 Query Freeze (QFZ)_____________________________________61 5.49 Query H-Position Level (QHP)____________________________62 5.50 Query Input Signal (QIN)________________________________63 5.51 Query Index Window (QIX)______________________________64 5.52...
Page 6
Panasonic RS-232 Protocol for LCD Projector 5.76 Color (VCO)___________________________________________89 5.77 Clock Phase (VCP)______________________________________90 5.78 Dot Clock (VDC)________________________________________91 5.79 H-Position (VHP)_______________________________________92 5.80 Picture Mode (VPM)_____________________________________93 5.81 Signal Mode Set (VSG)___________________________________94 5.82 Sharpness (VSR)________________________________________95 5.83...
Page 7
Panasonic RS-232 Protocol for LCD Projector 551 Introduction This document describes the commands and data formats to control by RS-232C, from a controller to the Panasonic projector. This document should be used in conjunction with the Operation Instructions. Information furnished in this document, is believed to be accurate and reliable. However, no responsibility is assumed for its use.
Page 8
Panasonic RS-232 Protocol for LCD Projector 662 Connection 2.1 Communication Parameters Signal Level RS-232C Sync Method Asynchronous Data Speed 9600 bps Data length 8bit Parity None Stop bit 1 X Parameter None S Parameter None Code (command) JIS X 0201 (Capital Letters Only) The device controlling the projector must match the above parameters. There is no capability to change the settings of the projector. 2.2 Address level The address level of this...
Page 9
Panasonic RS-232 Protocol for LCD Projector 77 2.4 Cable Specifications Use a RS-232C 9 pin to 9 pin straight cable. Pins 4,7 and 8 are internally shorted together in the projector.
Page 10
![Page 10
Panasonic RS-232 Protocol for LCD Projector 883 Communication
3.1 Command Format
Implement commands that are to be sent to the projector in the following manner.
[STX] COM1:P1P2P3P4 [ETX]
Head identifier - Send [STX] (Hex’02’ or Ctrl B for ASCII), at the beginning of the command string.
This will allow the projector to receive the following command.
Command (COM1) – The Command is written by 3 characters. The Letters are capitalized. . See
the command tables in Section 5 for...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-9.png "Page 10
Panasonic RS-232 Protocol for LCD Projector 883 Communication
3.1 Command Format
Implement commands that are to be sent to the projector in the following manner.
[STX] COM1:P1P2P3P4 [ETX]
Head identifier - Send [STX] (Hex’02’ or Ctrl B for ASCII), at the beginning of the command string.
This will allow the projector to receive the following command.
Command (COM1) – The Command is written by 3 characters. The Letters are capitalized. . See
the command tables in Section 5 for...")
Panasonic RS-232 Protocol for LCD Projector 883 Communication 3.1 Command Format Implement commands that are to be sent to the projector in the following manner. [STX] COM1:P1P2P3P4 [ETX] Head identifier - Send [STX] (Hex’02’ or Ctrl B for ASCII), at the beginning of the command string. This will allow the projector to receive the following command. Command (COM1) – The Command is written by 3 characters. The Letters are capitalized. . See the command tables in Section 5 for...