Home
>
Panasonic
>
Projector
>
Panasonic LCD Projector PT-L711 PT-L701 PT-L701SD PTL511 PT-L501 Operating Instructions
Panasonic LCD Projector PT-L711 PT-L701 PT-L701SD PTL511 PT-L501 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector PT-L711 PT-L701 PT-L701SD PTL511 PT-L501 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
Panasonic RS-232 Protocol for LCD Projector 89 89 5.76 Color (VCO)
Name Color Syntax [STX]VCO:p1p2p3[ETX] Function This command will adjust the Color Level. Parameters 000 – 063 Color Adjustment Range Response [STX]VCO[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VCO:031[ETX] Notes
This command is for the S-Video, Video and YPbPr
inputs.
Projector Model to Command Compatibility
Model
Number PT-L711U
PT-L711XU...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-90.png "Page 91
Panasonic RS-232 Protocol for LCD Projector 89 89 5.76 Color (VCO)
Name Color Syntax [STX]VCO:p1p2p3[ETX] Function This command will adjust the Color Level. Parameters 000 – 063 Color Adjustment Range Response [STX]VCO[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VCO:031[ETX] Notes
This command is for the S-Video, Video and YPbPr
inputs.
Projector Model to Command Compatibility
Model
Number PT-L711U
PT-L711XU...")
Panasonic RS-232 Protocol for LCD Projector 89 89 5.76 Color (VCO) Name Color Syntax [STX]VCO:p1p2p3[ETX] Function This command will adjust the Color Level. Parameters 000 – 063 Color Adjustment Range Response [STX]VCO[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]VCO:031[ETX] Notes This command is for the S-Video, Video and YPbPr inputs. Projector Model to Command Compatibility Model Number PT-L711U PT-L711XU...
Page 92
![Page 92
Panasonic RS-232 Protocol for LCD Projector 90 90 5.77 Clock Phase (VCP)
Name Clock Phase Syntax [STX]VCP:p1p2p3[ETX] Function This command will adjust the Clock Phase. Parameters 000 – 063 Adjustment Range Response [STX]VCP[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VCP:031[ETX] Notes
This command is available for the RGB signal only.
Projector Model to Command Compatibility
Model
Number PT-L711U
PT-L711XU...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-91.png "Page 92
Panasonic RS-232 Protocol for LCD Projector 90 90 5.77 Clock Phase (VCP)
Name Clock Phase Syntax [STX]VCP:p1p2p3[ETX] Function This command will adjust the Clock Phase. Parameters 000 – 063 Adjustment Range Response [STX]VCP[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VCP:031[ETX] Notes
This command is available for the RGB signal only.
Projector Model to Command Compatibility
Model
Number PT-L711U
PT-L711XU...")
Panasonic RS-232 Protocol for LCD Projector 90 90 5.77 Clock Phase (VCP) Name Clock Phase Syntax [STX]VCP:p1p2p3[ETX] Function This command will adjust the Clock Phase. Parameters 000 – 063 Adjustment Range Response [STX]VCP[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]VCP:031[ETX] Notes This command is available for the RGB signal only. Projector Model to Command Compatibility Model Number PT-L711U PT-L711XU...
Page 93
![Page 93
Panasonic RS-232 Protocol for LCD Projector 91 91 5.78 Dot Clock (VDC)
Name Dot Clock Syntax [STX]VDC:p1p2p3[ETX] Function This command will adjust the Dot Clock. Parameters 000 – 063 Dot Clock Adjustment Range Response [STX]VDC[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VDC:031[ETX] Notes
This command is available for the RGB signal only.
Projector Model to Command Compatibility
Model
Number PT-L711U
PT-L711XU...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-92.png "Page 93
Panasonic RS-232 Protocol for LCD Projector 91 91 5.78 Dot Clock (VDC)
Name Dot Clock Syntax [STX]VDC:p1p2p3[ETX] Function This command will adjust the Dot Clock. Parameters 000 – 063 Dot Clock Adjustment Range Response [STX]VDC[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VDC:031[ETX] Notes
This command is available for the RGB signal only.
Projector Model to Command Compatibility
Model
Number PT-L711U
PT-L711XU...")
Panasonic RS-232 Protocol for LCD Projector 91 91 5.78 Dot Clock (VDC) Name Dot Clock Syntax [STX]VDC:p1p2p3[ETX] Function This command will adjust the Dot Clock. Parameters 000 – 063 Dot Clock Adjustment Range Response [STX]VDC[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]VDC:031[ETX] Notes This command is available for the RGB signal only. Projector Model to Command Compatibility Model Number PT-L711U PT-L711XU...
Page 94
![Page 94
Panasonic RS-232 Protocol for LCD Projector 92 92 5.79 H-Position (VHP)
Name H-Position Syntax [STX]VHP:p1p2p3[ETX] Function This command will shift the picture horizontally. Parameters 000 – 255 H-Position Adjustment Range Response [STX]VHP[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VHP:098[ETX] Notes
Projector Model to Command Compatibility
Model
Number PT-L711U
PT-L711XU PT-L701U
PT-L701XU PT-L701SDU...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-93.png "Page 94
Panasonic RS-232 Protocol for LCD Projector 92 92 5.79 H-Position (VHP)
Name H-Position Syntax [STX]VHP:p1p2p3[ETX] Function This command will shift the picture horizontally. Parameters 000 – 255 H-Position Adjustment Range Response [STX]VHP[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VHP:098[ETX] Notes
Projector Model to Command Compatibility
Model
Number PT-L711U
PT-L711XU PT-L701U
PT-L701XU PT-L701SDU...")
Panasonic RS-232 Protocol for LCD Projector 92 92 5.79 H-Position (VHP) Name H-Position Syntax [STX]VHP:p1p2p3[ETX] Function This command will shift the picture horizontally. Parameters 000 – 255 H-Position Adjustment Range Response [STX]VHP[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]VHP:098[ETX] Notes Projector Model to Command Compatibility Model Number PT-L711U PT-L711XU PT-L701U PT-L701XU PT-L701SDU...
Page 95
![Page 95
Panasonic RS-232 Protocol for LCD Projector 93 93 5.80 Picture Mode (VPM)
Name Picture Mode Syntax [STX]VPM:p1p2p3[ETX] Function This command will set the Picture Mode. Parameters p1p2p3 Description
NAT - Natural
DYN - Dynamic Response [STX]VPM[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VPM:NAT[ETX] Notes
It is recommended that Natural be used for Video and
HDTV sources and Dynamic be used for Computer...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-94.png "Page 95
Panasonic RS-232 Protocol for LCD Projector 93 93 5.80 Picture Mode (VPM)
Name Picture Mode Syntax [STX]VPM:p1p2p3[ETX] Function This command will set the Picture Mode. Parameters p1p2p3 Description
NAT - Natural
DYN - Dynamic Response [STX]VPM[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VPM:NAT[ETX] Notes
It is recommended that Natural be used for Video and
HDTV sources and Dynamic be used for Computer...")
Panasonic RS-232 Protocol for LCD Projector 93 93 5.80 Picture Mode (VPM) Name Picture Mode Syntax [STX]VPM:p1p2p3[ETX] Function This command will set the Picture Mode. Parameters p1p2p3 Description NAT - Natural DYN - Dynamic Response [STX]VPM[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]VPM:NAT[ETX] Notes It is recommended that Natural be used for Video and HDTV sources and Dynamic be used for Computer...
Page 96
![Page 96
Panasonic RS-232 Protocol for LCD Projector 94 94 5.81 Signal Mode Set (VSG)
Name Signal Mode Set Syntax [STX]VSG:p1p2p3[ETX] Function This command will set the signal mode. Parameters Code Description
AT1 - Auto 1 (Video/S-Video)
AT2 - Auto 2 (Video/S-Video)
NTS - NTSC (Video/S-Video)
N44 - NTSC 443 (Video/S-Video)
PAL - PAL (Video/S-Video)
PAN - N-PAL (Video/S-Video)
PAM - M-PAL (Video/S-Video)
SEC - SECAM (Video/S-Video)
AUT - AUTO (RGB)
U01 - User 1...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-95.png "Page 96
Panasonic RS-232 Protocol for LCD Projector 94 94 5.81 Signal Mode Set (VSG)
Name Signal Mode Set Syntax [STX]VSG:p1p2p3[ETX] Function This command will set the signal mode. Parameters Code Description
AT1 - Auto 1 (Video/S-Video)
AT2 - Auto 2 (Video/S-Video)
NTS - NTSC (Video/S-Video)
N44 - NTSC 443 (Video/S-Video)
PAL - PAL (Video/S-Video)
PAN - N-PAL (Video/S-Video)
PAM - M-PAL (Video/S-Video)
SEC - SECAM (Video/S-Video)
AUT - AUTO (RGB)
U01 - User 1...")
Panasonic RS-232 Protocol for LCD Projector 94 94 5.81 Signal Mode Set (VSG) Name Signal Mode Set Syntax [STX]VSG:p1p2p3[ETX] Function This command will set the signal mode. Parameters Code Description AT1 - Auto 1 (Video/S-Video) AT2 - Auto 2 (Video/S-Video) NTS - NTSC (Video/S-Video) N44 - NTSC 443 (Video/S-Video) PAL - PAL (Video/S-Video) PAN - N-PAL (Video/S-Video) PAM - M-PAL (Video/S-Video) SEC - SECAM (Video/S-Video) AUT - AUTO (RGB) U01 - User 1...
Page 97
![Page 97
Panasonic RS-232 Protocol for LCD Projector 95 95 5.82 Sharpness (VSR)
Name Sharpness Syntax [STX]VSR:p1p2p3[ETX] Function This command will adjust the Sharpness Level. Parameters 000 – 031 Sharpness Adjustment Range Response [STX]VSR[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VSR:008[ETX] Notes
This command is available for all inputs.
Projector Model to Command Compatibility
Model
Number PT-L711U
PT-L711XU...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-96.png "Page 97
Panasonic RS-232 Protocol for LCD Projector 95 95 5.82 Sharpness (VSR)
Name Sharpness Syntax [STX]VSR:p1p2p3[ETX] Function This command will adjust the Sharpness Level. Parameters 000 – 031 Sharpness Adjustment Range Response [STX]VSR[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VSR:008[ETX] Notes
This command is available for all inputs.
Projector Model to Command Compatibility
Model
Number PT-L711U
PT-L711XU...")
Panasonic RS-232 Protocol for LCD Projector 95 95 5.82 Sharpness (VSR) Name Sharpness Syntax [STX]VSR:p1p2p3[ETX] Function This command will adjust the Sharpness Level. Parameters 000 – 031 Sharpness Adjustment Range Response [STX]VSR[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]VSR:008[ETX] Notes This command is available for all inputs. Projector Model to Command Compatibility Model Number PT-L711U PT-L711XU...
Page 98
![Page 98
Panasonic RS-232 Protocol for LCD Projector 96 96 5.83 Video Size (VSZ)
Name Video Size Syntax [STX]VSZ:p1p2p3[ETX] Function This command will adjust the size of the video.. Parameters 000 – 063 Video Size Adjustment Range Response [STX]VSZ[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VSZ:009[ETX] Notes
This command is for the S-Video and Video inputs only. This will make the picture larger or smaller.
Projector...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-97.png "Page 98
Panasonic RS-232 Protocol for LCD Projector 96 96 5.83 Video Size (VSZ)
Name Video Size Syntax [STX]VSZ:p1p2p3[ETX] Function This command will adjust the size of the video.. Parameters 000 – 063 Video Size Adjustment Range Response [STX]VSZ[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VSZ:009[ETX] Notes
This command is for the S-Video and Video inputs only. This will make the picture larger or smaller.
Projector...")
Panasonic RS-232 Protocol for LCD Projector 96 96 5.83 Video Size (VSZ) Name Video Size Syntax [STX]VSZ:p1p2p3[ETX] Function This command will adjust the size of the video.. Parameters 000 – 063 Video Size Adjustment Range Response [STX]VSZ[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]VSZ:009[ETX] Notes This command is for the S-Video and Video inputs only. This will make the picture larger or smaller. Projector...
Page 99
![Page 99
Panasonic RS-232 Protocol for LCD Projector 97 97 5.84 S1 Signal (VS1)
Name S1 Signal Syntax [STX]VS1:p1[ETX] Function This will set the Aspect Ratio of the Projector. Parameters Code Description
0 - 4:3 (Video/RGB)
1 - 16:9 (Video/RGB)
2 - S4:3 (Video/RGB)
0 - Auto (S-Video)
1 - 4:3 (S-Video)
2 - 16:9 (S-Video)
3 - S4:3 (S-Video) Response [STX]VS1[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-98.png "Page 99
Panasonic RS-232 Protocol for LCD Projector 97 97 5.84 S1 Signal (VS1)
Name S1 Signal Syntax [STX]VS1:p1[ETX] Function This will set the Aspect Ratio of the Projector. Parameters Code Description
0 - 4:3 (Video/RGB)
1 - 16:9 (Video/RGB)
2 - S4:3 (Video/RGB)
0 - Auto (S-Video)
1 - 4:3 (S-Video)
2 - 16:9 (S-Video)
3 - S4:3 (S-Video) Response [STX]VS1[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use...")
Panasonic RS-232 Protocol for LCD Projector 97 97 5.84 S1 Signal (VS1) Name S1 Signal Syntax [STX]VS1:p1[ETX] Function This will set the Aspect Ratio of the Projector. Parameters Code Description 0 - 4:3 (Video/RGB) 1 - 16:9 (Video/RGB) 2 - S4:3 (Video/RGB) 0 - Auto (S-Video) 1 - 4:3 (S-Video) 2 - 16:9 (S-Video) 3 - S4:3 (S-Video) Response [STX]VS1[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use...
Page 100
![Page 100
Panasonic RS-232 Protocol for LCD Projector 98 98 5.85 Tint (VTN)
Name Tint Syntax [STX]VTN:p1p2p3[ETX] Function This command will adjust the Tint of the picture. Parameters 000 – 063 Tint Adjustment Range Response [STX]VTN[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VTN[ETX] Notes
This command is only available for the S-Video and
Video inputs that are NTSC and NTSC 4.43 only.
Projector Model to Command...](http://img.usermanuals.tech/thumb/58/75802/w300_pt-l711_en_rs232c_guide_d-99.png "Page 100
Panasonic RS-232 Protocol for LCD Projector 98 98 5.85 Tint (VTN)
Name Tint Syntax [STX]VTN:p1p2p3[ETX] Function This command will adjust the Tint of the picture. Parameters 000 – 063 Tint Adjustment Range Response [STX]VTN[ETX] Interrupt Processing The Projector must be powered on for this command to
be effective. Examples of Use [STX]VTN[ETX] Notes
This command is only available for the S-Video and
Video inputs that are NTSC and NTSC 4.43 only.
Projector Model to Command...")
Panasonic RS-232 Protocol for LCD Projector 98 98 5.85 Tint (VTN) Name Tint Syntax [STX]VTN:p1p2p3[ETX] Function This command will adjust the Tint of the picture. Parameters 000 – 063 Tint Adjustment Range Response [STX]VTN[ETX] Interrupt Processing The Projector must be powered on for this command to be effective. Examples of Use [STX]VTN[ETX] Notes This command is only available for the S-Video and Video inputs that are NTSC and NTSC 4.43 only. Projector Model to Command...