Panasonic LCD Projector PT-FW430U PT-FX400U Operating Instructions

							Technical Information
ENGLISH - 81
Appendix
Pin assignments and signal names of  terminal 
J
Outside view Pin No.
Signal names Pin No.Signal names
C4
C1
C3 C2
C5
T.M.D.S data 2-Hot plug detection 
T.M.D.S data 2+T.M.D.S data 0- 
T.M.D.S data 2/4 shieldT.M.D.S data 0+ 
—T.M.D.S data 0/5 shield 
——
DDC clock—
DDC dataT.M.D.S clock shield 
Analog VDT.M.D.S clock + 
T.M.D.S data 1-T.M.D.S clock - 
T.M.D.S data 1+ C1Analog R/PR
T.M.D.S data 1/3 shield C2Analog G/G SYNC/Y
— C3Analog B/PB
— C4Analog HD/SYNC
+5V C5Analog GND
GND 
						

							Technical Information
82 - ENGLISH
Appendix
Two window display combination list (PT-FW430U Only)
Subwindow
Main window Computer  DVI-I analog 
VIDEO input S- 
VIDEO  input DVI-I digital HDMI
NETWORKRGB 
input YPBPR 
input RGB 
input YPBPR 
input
*1
Moving  image 
system
*2
RGB 
system
*1
Moving  image 
system
*2
RGB 
system
Computer RGB input
YPBPR input
DVI-I 
analog  RGB input
YPBPR input
VIDEO input
S-VIDEO input
DVI-I 
digital Moving image 
system *1
RGB  
system *2
HDMI Moving image 
system *1
RGB  
system *2
NETWORK
 : SIDE BY SIDE combination is possible
 : SIDE BY SIDE combination is impossible
 : SIDE BY SIDE combination is possible on the following conditions.  (An image may be unstable in the sub-window under some conditions.)
1)  The SIDE BY SIDE signals have the same vertical scanning frequency.
2)  SIDE BY SIDE combination has signals other than the combination of Interlace si\
gnals by Interlace 
signals.
Only 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 
*1 : 
1125(1080)/24p, 1125(1080)/50p, 1125(1080)/60p.
VGA (640 × 480) - WUXGA (1 920 × 1 200)
*2 : 
non-interlace signal, Dot clock frequency : 25 MHz - 162 MHz
(The WUXGA signals support only VESA CVT-RB (Reduced Blanking) signals.)
Note
If the horizontal resolution of the input signal of the sub window is 1 280 pixels or above, the picture quality of the sub 
 
z
window may be lowered.
Some input signals may not display when 1125 (1080)/60p or WUXGA input signals are selected.
 
z 
						

							Technical Information
ENGLISH - 83
Appendix
List of compatible signals
The following table specifies the types of signals compatible with the projectors.
Format :   V = VIDEO, S = S-VIDEO, D = DVI, C = COMPUTER, Y = YP
BPR, H = HDMI
Mode Display 
resolution *1 
(dots) Scanning 
frequency
Dot clock 
frequency 
(MHz) Picture 
quality *
2PnP
Format
H 
(kHz) V
(Hz)
P T-
FW430U P T-
FX400UCOMPUTERDVI-I 
analog DVI-I 
EDID1 DVI-I 
EDID2HDMI
NTSC/NTSC4.43/ PAL-M/PAL60 720 x 480i
15.759.9  - AA
V/S
PAL/PAL-N/SECAM 720 x 576i15.650.0  - AA
525i(480i) 720 x 480i15.759.9 13.5 AA
C/Y
625i(576i) 720 x 576i15.650.0 13.5 AA
525p(480p) 720 x 48331.559.9 27.0 AA ○○
H/D/C/Y
625p(576p) 720 x 57631.350.0 27.0 AA ○○
1125(1080)/60i 1920 x 1080i33.860.0 74.3 AA ○○
1125(1080)/50i 1920 x 1080i28.150.0 74.3 AA ○○
1125(1080)/24p 1920 ×108027.024.0 74.3 AA ○○
1920×1080 1920×108066.6
59.9 138.5 AA
C
55.6 49.9 141.5 AA
1125(1080)/60p 1920 x 1080p67.560.0 148.5 AA ○○
H/D/C/Y1125(1080)/50p 1920 x 1080p56.350.0 148.5 AA ○○
750(720)/60p 1280 x 72045.060.0 74.3 AAA ○○
750(720)/50p 1280 x 72037.550.0 74.3 AAA ○○
VESA 640 x 40031.5
70.1 25.2 AA
C
37.9 85.1 31.5 AA
VGA 640 x 48031.5
59.9 25.2 AA○○ ○○H/D/C
35.0 66.7 30.2 AA○○
C
37.9
72.8 31.5 AA○○
37.5 75.0 31.5 AA○○
43.3 85.0 36.0 AA
SVGA 800 x 60035.2
56.3 36.0 AA○○
37.9 60.3 40.0 AA○○ ○○H/D/C
48.1 72.2 50.0 AA○○
C
46.9
75.0 49.5 AA○○
53.7 85.1 56.3 AA
MAC 832 x 62449.774.6 57.3 AA○○
XGA 1024 x 76839.6
50.1 51.9 AAA
H/D/C
48.4
60.0 65.0 AAA ○○ ○○
56.5 70.1 75.0 AAA ○○ ○○
60.0 75.0 78.8 AAA ○○ ○○
68.7 85.0 94.5 AAA
MXGA 1152 x 86464.0
71.2 94.2 AA○○
C
67.5
74.9 108.0 AA
76.7 85.0 121.5 AA
MAC 1152 x 87068.775.1 100.0 AA○○
MSXGA 1280 x 96060.060.0 108.0 AA○○
“i” added to the resolution value indicates an interlaced signal.
*1 : 
Picture quality is indicated by the following symbols.
*2 : 
AA: Maximum picture quality can be obtained.
A:  Signals are converted by the image processing circuit. 
						

							Technical Information
84 - ENGLISH
Appendix
ModeDisplay 
resolution *1 
(dots) Scanning 
frequency
Dot clock 
frequency 
(MHz) Picture 
quality *
2PnP
Format
H 
(kHz) V
(Hz)
P T-
FW430U P T-
FX400UCOMPUTERDVI-I 
analog DVI-I 
EDID1 DVI-I 
EDID2HDMI
SXGA 1280 x 102464.0 60.0 108.0 A A
○ ○H/D/C
80.0 75.0 135.0 A A ○ ○
C
91.1 85.0 157.5 A A
SXGA60
+1400 x 1050 64.0 60.0 108.0 A A
65.1 59.9 122.4 A A ○ ○○ ○H/D/C
UXGA 1600 x 1200 75.0 60.0 162.0 A A ○ ○
C
WIDE750(720) 1280 x 720 44.8 59.9 74.5 AA A
○ ○
37.1 49.8 60.5 AA A
WXGA768 1280 x 768 39.6 49.9 65.3 AA A
H/D/C
47.8 59.9 79.5 AA A ○ ○○ ○
WXGA800 1280 x 800 41.3 50.0 68.0 AA A
49.1 60.2 69.1 AA A
C
49.7 59.8 83.5 AA A ○ ○○ ○H/D/C
WXGA
+1440 x 900 55.9 59.9 106.5 A A ○ ○
C
WSXGA
+1680 x 1050 65.3 60.0 146.3 A A ○ ○
WUXGA 1920 x 1200 74.0 59.9 154.0 A A
“i” added to the resolution value indicates an interlaced signal.
*1 * 
Picture quality is indicated by the following symbols.
*2 * 
AA* Maximum picture quality can be obtained.
A*  Signals are converted by the image processing circuit.
Note The number of display dots is 1280 x 800 for the PT-FW430U and 1024 x 768 for the PT-FX400U. 
 
z
A signal with a different resolution will be projected after converting the resolution to m\
atch the projector 
display.
When interlaced signals are connected, flicker may occur on the projected image.
 
z
Restoring the MENU LOCK PASSWORD to default
To initialize your password, consult your distributor. 
						

							ENGLISH - 85
Appendix
Specifications
Model No.PT-FW430U PT-FX400U
Power supply AC100 V - 240 V    50 Hz/60 Hz
Power consumption 100 V - 240 V 3.9 A-1.4 A 330 W
When [STANDBY MODE] of [ECO MANAGEMENT] is set to [ECO]*  0.3 W (100 V - 120 V), 0.4 W (220 V - 240 V)
When [STANDBY MODE] of [ECO MANAGEMENT] is set to [NORMAL]* 9 W When [STANDBY MODE] of [AUDIO SETTING] is set to [ON]* 20 W
LCD panel Panel size
1.89 cm(0.74")
(aspect ratio 16 * 10) 2.03 cm(0.8")
(aspect ratio 4 * 3)
Display method 3 transparent LCD panels (RGB)
Drive method Active matrix method
Pixels 1 024 000
(1 280 x 800) x 3 panels 786 432
(1 024 x 768) x 3 panels
Lens Manual zoom (2x) / Manual focus
F 1.7 to 2.6, f 21.6 mm to 43.0 mm Manual zoom (2x) / Manual focus
F 1.7 to 2.6, f 24.0 mm to 47.2 mm
Luminous lamp 250 W UHM lamp
Light output *
13500 lm 4000 lm 
Applicable 
scanning 
frequency 
*
2
for RGB signal Horizontal 15.6 kHz to 91.1 kHz, Vertical 24 Hz to 85.1 Hz
PIAS (Panasonic Intelligent Auto Scanning) system
Dot clock frequency: 162 MHz or less
for YP
BPR signal [525i(480i)] 
Horizontal 15.75 kHz, Vertical 60 Hz
[525p(480p)]  Horizontal 31.5 kHz, Vertical 60 Hz
[750(720)/60p]  Horizontal 45 kHz, Vertical 60 Hz
[1125(1080)/60i]  Horizontal 33.75 kHz, Vertical 60 Hz
[1125(1080)/50p]  Horizontal 56.25 kHz, Vertical 50 Hz
[625i(576i)]  Horizontal 15.63 kHz, Vertical 50 Hz
[625p(576p)]  Horizontal 31.25 kHz, Vertical 50 Hz
[750(720)/50p]  Horizontal 37.5 kHz, Vertical 50 Hz
[1125(1080)50i]  Horizontal 28.13 kHz, Vertical 50 Hz
[1125(1080)/24p]  Horizontal 27 kHz, Vertical 24 Hz
[1125(1080)/60p]  Horizontal 67.5 kHz, Vertical 60 Hz
HD/SYNC and V terminals are not compliant with 3 value composite SYNC
 
z
for Video signal 
(including S-Video) Horizontal 15.75 kHz / 15.63 kHz, Vertical 50 Hz / 60 Hz
for DVI-D / HDMI 
signal 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60p, 1125(1080)/50p, 
1125(1080)/60i, 1125(1080)/50i, 1125(1080)/24p
Displayable resolution* VGA to WUXGA (non-interlace)
 
z
Dot clock frequency: 25.2 MHz to 148.5 MHz 
z
Color system 7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL 60)
Projection size 0.84 m-7.62 m(33"-300")
Screen aspect ratio 16 * 104 * 3
Projection scheme Front / Rear / Mount on Ceiling / Floor (Menu setting system)
Speaker 1 (4 cm round-type)
Maximum usable volume output 5 W
Contrast ratio *
1600 : 1 (all white / all black)
Measurement, measuring conditions and method of notation all comply with\
 ISO21118 international 
*1 * 
standards.
For details of video signals that can be projected using this projector, refer to “List of compatible signals”. 
*2 * 
(
Æpage 83) 
						

							Specifications
86 - ENGLISH
Appendix
Model No.PT-FW430U PT-FX400U
Terminals COMPUTER IN
1 (D-sub 15 pin female)
[RGB signal] 
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 [p-p] 75 Ω
 
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
  VD TTL high impedance, automatic positive/negative polarity compatible
[YP
BPR signal]  Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
DVI-I IN 1 (DVI-I 29 pin)
[DIGITAL signal] 
Single link, DVI 1.0 compliant, HDCP compatible
[RGB signal]  0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 [p-p] 75 Ω
 
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
  VD TTL high impedance, automatic positive/negative polarity compatible
[YP
BPR signal]  Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
VIDEO IN 1 (RCA pin jack   1.0 V [p-p] 75 Ω)
S-VIDEO IN 1 (Mini DIN 4 pin, Y 1.0 V [p-p], C 0.286 V [p-p] 75 Ω, S1 signal compatible)
HDMI IN 1 (HDMI 19 pin, HDCP and Deep color compatible)
SERIAL IN 1 (D-sub 9 pin, RS-232C compliant, for computer control use
AUDIO IN 2 (M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more)
1 (RCA pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ and more)
AUDIO OUT 1 (M3 stereo mini jack, stereo monitor output compatible,
0 V [rms] to 2.0 V [rms] valuable, output impedance 2.2 kΩ and less)
LAN 1 (for RJ-45 network connection, PJLink compatible, 10Base-T/100Base-TX)
WIRELESS MODULE 
connection  1 (only for the Wireless module; ET-WM200U, optional)
Power cable length 2.0 m(78 3/4")
Cabinet Molded plastic
Dimensions Width: 430 mm (16 7/8")
Height: 125.5 mm (5") (when front adjustable feet shortened) Depth: 323 mm (12 3/4") (excluding protractions)
Weight Approx.6.0 kg(13.2 lbs.) *
3
Operating environmentOperating environment temperature *4 : 0 °C (32 °F) to 40 °C (104 °F)
Operating environment humidity: 20 % to 80 % (no condensation)
Remote 
control Power supply
DC 3 V (battery (AA/R6/LR6 type) x 2)
Operating range Approx. 15 m (49'2") (when operated directly in front of receptor)
Weight 117 g (4.2 ozs.) (including batteries)
Dimensions Width : 48 mm (1 7/8"), Length : 163 mm (6 13/32"), Height : 24.5 mm (15/16")
This is an average value. It may differ depending on individual product.
*3 : 
When using this projector at high elevation 1400 m (4593 ft) to 2700 m (8858 ft) sea level, the operating 
*4 : 
environment temperature will be 0 °C (32 °F) to 35 °C (95 °F).
The part numbers of accessories and separately sold components are subject to change without notice.
 
z 
						

							Ceiling mount bracket safeguards
ENGLISH - 87
Appendix
Dimentions

0ç0ê0í0õ0æ0ó
0õ0æ0î0ñ
0í0â0î0ñ
0ð0ï/·0è/¸
0Á0ô0õ0â0ï0å0ã0ú/·0ó/¸
0ç0ê0í0õ0æ0ó 0õ0æ0î0ñ
0æ0ï0õ0æ0ó0ó0æ0õ0ö0ó0ï
0î0æ0ï0ö0ê0ï0ñ0ö0õ0Á0ô0æ0í0æ0ä0õ
0í0â0î0ñ
0ð0ï/·0è/¸
0Á0ô0õ0â0ï0å0ã0ú/·0ó/¸
0ç0ð0ä0ö0ô
0û0ð0ð0î
0ô0é0ê0ç0õ0Á0í0ð0ä0ì0í0æ0ï0ô0Á0ô0é0ê0ç0õ
323 (12 3/4)
430 (16 7/8)
60.5
(2 3/8)
10.5
(3/8)
53
(2 1/8) 
125.5 (5)
Actual dimension may differ by product.
: 
½
Ceiling mount bracket safeguards
Installation work of the ceiling mount bracket should only be carried by a qualified technician. 
z
Even if it is during guaranteed period, the manufacturer is not responsi\
ble for any hazard or damage caused  
z
by using a ceiling mount bracket which is not purchased from an authoriz\
ed distributors, or environmental 
conditions.
Ask authorized personnel to promptly remove any products that are no lon\
ger used.
 
z
Use a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Power  
z
screwdrivers or impact screwdrivers must not be used.
For details, see the work instruction manual packed together with the ce\
iling mount bracket.
 
z
The model Nos. of the accessories and the parts sold separately are subj\
ect to change without notice. 
z
Model No. of ceiling mount bracket: 
ET-PKF110H (for high ceilings)
ET-PKF110S (for low ceilings)Bottom view
9 mm(3/8)


M4 x 0.7
Torque:1.25 ± 0.2 N.m
Specifications 
						

							88 - ENGLISH
Appendix
Index
A
Accessories .................................... 15
ADVANCED MENU  ........................ 40
Air filter  ..................................... 70, 71
ASPECT  ......................................... 44
AUDIO SETTING  ............................ 61
AUTO POWER SAVE  .....................59
AUTO SETUP  ..................... 33, 52, 54
AV MUTE function  ....................32, 54
B
BACK COLOR  ................................ 53
Basic operations using the remote  control  ......................................... 32
BRIGHTNESS  ................................ 38
C
Cautions on use.............................. 14
Cautions when installing  ................. 12
Cautions when transporting  ............ 12
CD-ROM  ......................................... 15
Changing the display language  ...... 48
CLOCK PHASE  .............................. 43
CLOSED CAPTION SETTING  ....... 51
COLOR  ........................................... 39
COLOR TEMPERATURE  ...............39
Connecting  ..................................... 27
Connecting the power cord .............28
CONTRAST  .................................... 38
CONTROL DEVICE SETUP  ........... 66
CONTROL PANEL  .......................... 19
D
DATE AND TIME  ............................ 62
DAYLIGHT VIEW  ............................ 40
DEFAULT button  ............................. 33
DIGITAL CINEMA REALITY  ........... 40
DIGITAL ZOOM  .............................. 55
Direct power off function  .................30
DISPLAY OPTION menu  ................49
DISPLAY SETTING  ........................ 65
Disposal  .......................................... 13
DOT CLOCK  ................................... 43
DVI-I IN  ........................................... 50
E
ECO button ..................................... 33
ECO MANAGEMENT  ..................... 59
EMULATE  ....................................... 60
F
FILTER indicator ............................. 69
FRAME LOCK  ................................ 47
FREEZE  ......................................... 54
FREEZE function  ............................ 32
Front adjustable feet  ....................... 24
FUNCTION BUTTON  .....................60
Function buttons  ............................. 33
H
HDMI IN .......................................... 50
HIGH ALTITUDE MODE  .................57
How to adjust the state of the   image  .......................................... 31
I
ID numbers ............................... 20, 56
INDEX WINDOW  ............................ 54
INITIALIZE  ...................................... 63
INITIALIZE ALL  ............................... 63
INITIAL SETTING  ........................... 16
INITIAL START UP  ......................... 56
INPUT GUIDE  ................................ 49
Installing batteries ...........................20
K
KEYSTONE .................................... 42
L
LAMP indicator ............................... 68
LAMP POWER  ............................... 57
Lamp unit  .................................. 72, 73
LANGUAGE menu ..........................48
Lens shift function ...........................24
List of compatible signals  ............... 83
M
MAIN MENU  ................................... 36
Maintenance  ................................... 70
Managing the indicated problems ...68
MENU LOCK  .................................. 65
MENU LOCK PASSWORD  ............65
Menu Navigation ............................. 35
N
Navigating through the menu  ......... 35
NETWORK menu  ...........................67
NOISE REDUCTION  ......................41
NO SIGNAL SHUT-OFF  ................. 59
O
ON SCREEN DISPLAY  .................. 49
Operating environment  ................... 86
Optional accessories  ...................... 15
OSD DESIGN  ................................. 49
Other terminals  ............................... 80
OVER SCAN  .................................. 43
P
PASSWORD ................................... 64
PASSWORD CHANGE  ..................64
PICTURE menu  .............................. 38
PICTURE MODE  ............................ 38
POSITION menu  ............................ 42
Power indicator  ............................... 28
Powering off the projector  ...............30
Powering up the projector ...............29
Precautions for Use  ........................ 12
Projecting ........................................ 31
Projection distance  ................... 22
, 23
PROJECTION METHOD  ..........21, 57
Projector body  ................................ 18
PROJECTOR ID  ............................. 56
PROJECTOR SETUP menu  ..........56
R
Read this first .................................... 2
Rear terminals  ................................ 19
Remote control  ............................... 17
Removing batteries .........................20Replacing the unit
 ........................... 71
Resetting to the factory   default  ................................... 33, 35
RGB/YP
BPR  .................................... 41
S
SCHEDULE .................................... 58
SCREEN SETTING   .......................51
Screen size and throw distance ......22
Security........................................... 13
SECURITY menu  ...........................64
Selecting the image  ........................ 31
Serial terminal................................. 77
Setting Remote control ID   numbers  ...................................... 20
Setting up  ....................................... 21
SHARPNESS  ................................. 39
SHIFT  ............................................. 42
SHIFT V  .......................................... 42
SIDE BY SIDE  .......................... 55, 82
SIGNAL SEARCH  ..........................53
Specifications  ................................. 85
STANDBY MODE  ...........................59
STARTUP LOGO  ............................ 52
STATUS  .......................................... 56
SUB MENU  ..................................... 36
Switching the input signal  ............... 32
SXGA MODE  .................................. 53
T
TEMP indicator ............................... 69
TEST PATTERN  ............................. 63
TEXT CHANGE  .............................. 65
TINT  ................................................ 39
Troubleshooting  .............................. 75
TV-SYSTEM  ................................... 41
V
VOLUME ........................................ 34
W
WARNING MESSAGE ...................49
WIDE MODE  .................................. 53
Wireless Module  ............................. 74 
						

							Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union.
If you wish to discard this product, please contact your local authoriti\
es or dealer and ask for 
the correct method of disposal.
Panasonic Solutions Company
3 Panasonic Way, Secaucus, NJ 07094
TEL: (877) 803 - 8492
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
TEL: (905) 624 - 5010
0ñ1111111
10Á0ä11111111
11
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 201 1