Panasonic LCD Projector PT-AX200U Operating Instructions

PICTURE menu
ENGLISH - 31
Settings
You can adjust the white balance of the projected image.
 Setting range: -6 to +6
You can switch automatic adjustment system of the lamp 
and the lens iris, which control the contrast and black 
level, on/off.
 ON: Automatic adjustment
 OFF: No adjustment
The luminance sensor detects the brightness of the 
room and keeps the luminance in balance automatically. 
If needed, you can switch this function on/off from 
MODE, or adjust it manually from MANUAL by pressing 
I...

Settings
PICTURE menu
32 - ENGLISH
JTV-SYSTEM
When the video signal is changed, the setting 
switches automatically.
You can switch the setting manually to match the 
video data. Press I H to cycle through the 
options.You can save and name the adjusted PICTURE menu 
settings for instant access from FAVORITE LOAD 
menu.
1. Adjust the items in PICTURE menu.
2. Select FAVORITE SAVE and press the ENTER 
button.
3. Select the required memory setting and press the 
ENTER button.
 The confirmation screen will...

PICTURE menu
ENGLISH - 33
Settings
You can edit the named memory settings.
QDeleting a memory setting
1. Select FAVORITE DELETE and press the ENTER 
button.
2. Select the required memory setting and press the 
ENTER button.
 If you select ALL DELETE, you can delete all of the 
saved memory settings.
3. Select OK in the confirmation screen and press the 
ENTER button.
QChanging the name of the memory 
setting
1. Select the required memory setting and press the 
ENTER button.
2. Use F G I H to specify the...

34 - ENGLISH
Settings
POSITION menu
You can move the projected image horizontally for fine 
adjustment.
You can move the projected image vertically for fine 
adjustment.
If you have interference patterns of the projected image, 
which is sometimes referred to as moire or noise, you 
can minimize it by pressing I H to adjust the clock 
frequency. (Available with signals from COMPUTER IN 
only)If you require further adjustment for the same reason as 
the DOT CLOCK adjustment, you can fine adjust the...

POSITION menu
ENGLISH - 35
Settings
JAspect ratio options and projection example
If you apply the aspect ratio options to the projected image, the result will be as follows. The result may differ 
due to the input signals. See “Switching the aspect ratio” on page 23.
QVIDEO/S-VIDEO/COMPONENT
Not available with 1 125 (1 080)/50i, 1 125 (1 080)/60i, 1 125 (1 080)/50p, 1 125 (1 080)/60p, 1 125 (1 080)/
24p, 750 (720)/50p and 750 (720)/60p signals.
QCOMPONENT signals
Available with 1 125 (1 080)/50i, 1 125...

Settings
POSITION menu
36 - ENGLISH
WSS (Wide Screen Signalling) detects if a PAL/
625p (576p)/625i (576i) signal is input and that signal 
has an identification signal, and switch the aspect ratio 
to required setting automatically. You can switch the 
system off manually.
If the 4 edges of an image is partly dropped, you can use 
this function to adjust and project it properly.
 Setting range: 0 to +10
 OVER SCAN is not available with COMPUTER 
signals.
If the projector is aligned non-perpendicularly...

ENGLISH - 37
Settings
FUNCTION BUTTON
You can assign a frequently used menu option to the FUNCTION button for shortcut. Press I H to select the 
required menu option and press the ENTER button.
QBLANK function
You can stop the projection temporary for electrical power save. To escape from the blank mode, press any 
button except the LIGHT button.
Remote control Control panel
 See “Navigating through the MENU” on page 27.
 See “Main menu and sub-menu” on page 28.
FUNCTION BUTTON
BLANKpage 37
SLEEPpage 39...

38 - ENGLISH
Settings
OPTION menu
When you change the input method, the guidance 
appears in the upper right corner of the screen. The 
following display methods are available. Press I H to 
cycle through the options.
You can change the background color of the menu. 
Press I H to cycle through the option.
 TYPE1Semi transparent black
 TYPE2Solid blue
 TYPE3Semi transparent dark blue
You can change the position where to display the menu. 
Press I H to cycle through the options.You can choose a screen...

OPTION menu
ENGLISH - 39
Settings
You can select the required duration of time and set the 
off timer to turn off the power of the projector 
automatically. 3 minutes before turn-off, the countdown 
of minutes will be displayed in the lower right corner. 
Press I H to cycle through the options.
If you use the projector at high elevation, the ALTITUDE 
setting need to be HIGH to set the fan speed high. Press 
I H to select the required option.
 LOWThe fan speed is low.
 HIGHThe fan speed is high.
You can...

40 - ENGLISH
Maintenance
TEMP and LAMP Indicators
If a problem should occur with the projector, the LAMP and/or TEMP 
indicators will inform you. Manage the indicated problems as follow.
1. Confirm the status of all indicators and projector, and switch off 
the projector in proper way.
2. Find out the cause of the problem by status of the LAMP and/or 
TEMP indicators.
3. Follow the following instruction for each indication and solve the 
problem.
4. Turn on the projector in the correct way and confirm...