Home > Panasonic > Projector > Panasonic LCD Projector PT-AX200U Operating Instructions

Panasonic LCD Projector PT-AX200U Operating Instructions

Here you can view all the pages of manual Panasonic LCD Projector PT-AX200U Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 21

ENGLISH - 21
Basic Operation
Projecting an image
1. Switch on the connected devices.
 Press the play button of the required device.
2. Press the INPUT SELECT button to select the 
required input method if needed. See “Switching 
the input signal” on page 26.
 The image will be projected on the screen.
1. Press the ASPECT button to select the required 
aspect mode. See “Switching the aspect ratio” on 
page 23.
2. Adjust the projected image with the lens shift 
levers. See “Lens shift and positioning” on...

Page 22

22 - ENGLISH
Basic Operation
Remote control operation
You can operate the projector with the remote control 
within the remote range 7 m (2211).
QFacing to the projector
Ensure the remote control emitter is facing to the 
remote control signal receptor on front/back of the 
projector and press the required buttons to 
operate.
QFacing to the screen
Ensure the remote control emitter is facing to the 
screen and press the required buttons to operate 
the projector. The signal will be reflected off the...

Page 23

Basic Operation
Remote control operation
ENGLISH - 23
You can display the PICTURE and ADVANCED MENU menu items by pressing the PIC. ADJUST 
button. Press the button to switch between PICTURE and ADVANCED MENU menu. Press F G to 
select the required menu item and I H to adjust.
QPICTURE menu items
PICTURE MODE, CONTRAST, BRIGHTNESS, 
COLOR, TINT, SHARPNESS, COLOR 
TEMPERATURE and DYNAMIC IRIS
QADVANCED MENU items
GAMMA, CONTRAST, BRIGHTNESS, NR, 
MPEG NR, CINEMA REALITY and TV-SYSTEM
The aspect ratio will...

Page 24

Basic Operation
Remote control operation
24 - ENGLISH
You can adjust a selected color individually and save and retrieve under the PICTURE MODE setting. 
Press the COLOR MANAGEMENT button to open the menu.
QAdjusting the selected color
Select a color and adjust COLOR, TINT and 
BRIGHTNESS.
1. Select the CURSOR menu and press ENTER.
 The projected image is captured, and the target 
cursor is displayed. 
 When the LOG is fully stored, the target cursor will 
not be displayed. See “Managing stored logs” on...

Page 25

Basic Operation
Remote control operation
ENGLISH - 25
QSaving a log setting as a profile
Return to the COLOR MANAGEMENT menu and 
save the stored log as a profile. Make sure that the 
PICTURE MODE is not switched.
1. Select the PROFILE SAVE menu and press 
ENTER
 The PROFILE SAVE menu is displayed. You can 
save the profile as USER1, USER2 and USER3.
2. Press ENTER to save the profile
 The confirmation screen is displayed. Press ENTER 
again to save.
3. Use F G I H to specify the location of the...

Page 26

Basic Operation
Remote control operation
26 - ENGLISH
You can switch the input method manually by pressing the INPUT SELECT button. Press the button 
several times or press I H to cycle through the input methods as follows. The actual projected image 
will be changed in a while.
 The graphical guidance will be displayed on the upper 
right of the projected image and you can confirm the 
selected input method which is highlighted in yellow. See 
“INPUT GUIDE” on page 38.
You can assign the following menu...

Page 27

ENGLISH - 27
Settings
Menu Navigation
The menu system allows you to access functions which do not have their own dedicated buttons on the remote 
control. The menu options are structured and categorized. You can navigate through the menu with F G H I 
buttons.
JDisplaying the main menu
Press the MENU button to display the main 
menu and the operating guidance.
QAdjusting with the bar scale items
The triangle mark under the bar indicates factory 
default setting and the square indicates the current...

Page 28

Settings
Menu Navigation
28 - ENGLISH
The main menu has 5 options. Select the required menu item and press ENTER to display the sub-menu.
Main menu and sub-menu
NOTE:
• Some default settings vary by the selected input signal.
• Sub-menu items vary according to the selected input signal.
• Some settings are adjustable without any signals.
Main menuSub-menuOptions (Underlined is default setting)Page
PICTURE PICTURE MODE NATURAL NORMAL
DYNAMICpage 30
CINEMA1 CINEMA2 VIVID CINEMA
GAME
CONTRAST
• Default:...

Page 29

Menu Navigation
ENGLISH - 29
Settings
Main menuSub-menuOptions (Underlined is default setting)Page
POSITION H-POSITION
• Default: 0page 34
V-POSITION
• Default: 0page 34
DOT CLOCK
*1
*1.COMPONENT/COMPUTER signals only
• Default: 0page 34
CLOCK PHASE
*2
*2.COMPONENT signals only
• Default: 0page 34
ASPECT 4:3 16:9 14:9page 34
ZOOM1 ZOOM2 V SCROLL
H-FIT V-FIT JUST
WSS
*3
*3.VIDEO/S-VIDEO/COMPONENT signals only
ONOFFpage 36
OVER SCAN
*4
*4. Not available with COMPUTER signals
• Default: 0page 36
KEYSTONE
•...

Page 30

30 - ENGLISH
Settings
PICTURE menu
Depending on the projection environment, you can use 
these preset parameter settings to optimize image 
projection. Press I H to cycle through the options.
QReproducing color of an sRGB image
For reproducing the original color of S-VIDEO 
images precisely, set as follows.
1. Press the PICTURE ADJUST button and select 
NATURAL.
2. Press the DEFAULT button to reset the other sub-
menu items.
3. Press the RETURN button once to return to the 
main menu and select OPTION....
Start reading Panasonic LCD Projector PT-AX200U Operating Instructions

Related Manuals for Panasonic LCD Projector PT-AX200U Operating Instructions

All Panasonic manuals