Panasonic LCD Projector PT-AE300U PT-AE200U Operating Instructions

TQBJ 0115-2
LCD Projector 
Operating Instructions
Model No.
PT-AE300U
PT-AE200U
R
PCPOWER
LIGHT
INPUTENTERMENUFREEZENORMALASPECTUSERMEMORYVOLUMEPICTUREMODESDMUTESD TIMEMENULCD PROJECTORVIDEOCMPNTCOMPONENT
KEYSTONE
Before operating this product, please read the instructions carefully and save this
manual for future use.For assistance, please call : 1-888-View-PTV(843-9788)
or send e-mail to : [email protected]
or visit us at www.panasonic.com (U.S.A)
For assistance, please call :...

2-E
NGLISH
ENGLISH
-3
Preparation
CAUTION:This equipment is equipped with a
three-pin grounding-type power
plug. Do not remove the grounding
pin on the power plug. This plug will
only fit a grounding-type power
outlet. This is a safety feature. If you
are unable to insert the plug into the
outlet, contact an electrician. Do not
defeat the purpose of the grounding
plug.
WARNING:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC...

ENGLISH
-5
Preparation
Precautions with regard to safetyWARNINGIf a problem occurs (such as no image or no sound) or if you notice
smoke or a strange smell coming from the projector, turn off the power
and disconnect the power cord from the wall outlet.
BDo not continue to use the projector in such cases, otherwise fire or
electric shocks could result.
BCheck that no more smoke is coming out, and then contact an Authorized
Service Center for repairs.
BDo not attempt to repair the projector yourself, as...

ENGLISH
-7
Preparation
6-E
NGLISH
BHeated air comes out of the air outlet port. Do not bring your hands or
face, or objects which cannot withstand heat close to this port, otherwise
burns or damage could result.
Replacement of the lamp unit should only be carried out by a qualified
technician.
BThe lamp unit has high internal pressure. It can easily become damaged if
struck against hard objects or dropped, and injury or malfunctions may
result.
When replacing the lamp, allow it to cool for at least one...

ENGLISH
-9
Preparation
8-E
NGLISH
Use only the specified battery.
BIf an incorrect battery is used, it may explode or leak, and fire, injury or
contamination of the battery compartment and surrounding area may
result.
Do not mix old and new batteries.
BIf the batteries are inserted incorrectly, they may explode or leak, and fire,
injury or contamination of the battery compartment and surrounding area
may result.
Do not put your weight on this projector.
BYou could fall or the projector could break, and...

ENGLISH
-11
Preparation
10-E
NGLISH
About the SD memory card slot
Make sure that there are no foreign objects inside the slot when inserting an
optional SD memory card. Failure to observe it may damage the card and
the slot.
About the screen
If the screen you are using is dirty, damaged or discolored, attractive
projections cannot be obtained. Do not apply any volatile substances to the
screen, and do not let it become dirty or damaged.
About the lamp
The lamp may need to be replaced earlier due to...

ENGLISH
-13
Preparation
12-E
NGLISH
#Air outlet port
Do not cover this port.WARNINGDo not bring your hands or other
objects close to the air outlet
port.
BHeated air comes out of the air
outlet port. Do not bring your
hands or face, or objects which
cannot withstand heat close to
this port, otherwise burns or
damage could result.
$Connector panel 
(page 16)
%Power input socket (AC IN)
(page 22)
The accessory power cord is
connected here.
Do not use any power cord other
than the accessory power cord....

ENGLISH
-15
Preparation
14-E
NGLISH
+KEYSTONE buttons
(pages 28 and 29)
This button is used to correct
keystone distortion of the
projected image when the
projector position is tilted upward
or downward.
,NORMAL button 
(page 27)
This button is used to reset the
projector adjustment values to the
factory default settings.
-ASPECT button 
(page 30)
This button is used for aspect
adjustment (vertical and
horizontal proportions).
.MUTE button
(page 33)
This button momentarily stops
output of the projector’s...

ENGLISH
-17
Preparation
16-E
NGLISH


#
$ %& '(
$% '
#(
#AUDIO L-R input jacks 
(page 18)
$VIDEO input jack 
(page 18)
This jack is used to input video
signals from a video equipment
such as a video deck.
%S2 VIDEO input connector 
(page 18 and 30)
This connector is used to input
signals from an S-VIDEO-
compatible equipment such as a
video deck. The connector is
compatible with S2 and S1
signals, and projector aspect is
automatically adjusted according
to the type of signal received.&DVI-D IN...

18-E
NGLISH
ENGLISH
-19
Preparation
Example of connecting to video equipment
DVD player
Video deck
NOTE:
BOnly one audio system circuit is available for the AUDIO IN L-R jacks, so if
you wish to change the audio input source, you will need to remove and
insert the appropriate plugs. 
ConnectionsNotes on connectionsBRead the instruction manual for each system component carefully before
connecting it.
BTurn off the power supply for all components before making any
connections.
BIf the cables necessary for...