Panasonic LCD Projector PT-AE100U Operating Instructions

TQBJ 0095-1
LCD Projector 
Operating Instructions
Model No.
PT-AE100U
R
DIGITAL ZOOMENTERMENUNORMAL
FMUTEINPUTASPECTVOLUMEPROJECTOR
R
Before operating this product, please read the instructions carefully and save this
manual for future use.For assistance, please call : 1-888-VIEW-PTV(843-9788)
or send e-mail to : [email protected]
or visit us at www.panasonic.com (U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.co.jp/global/ (Puerto Rico)
ENGLISH 

23
Preparation
IMPORTANT SAFETY NOTICEWARNING: 
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Dear Panasonic Customer:This instruction booklet provides all the necessary operating information that
you might require. We hope it will help you to get the most performance out
of your new product, and that you will be pleased with your Panasonic LCD
projector.
The serial number of your product may be found on its back. You should
note it in the space provided...

5
Preparation
Precautions with regard to safetyWARNINGIf a problem occurs (such as no image or no sound) or if you notice
smoke or a strange smell coming from the projector, turn off the power
and disconnect the power cord from the wall outlet.
BDo not continue to use the projector in such cases, otherwise fire or
electric shocks could result.
BCheck that no more smoke is coming out, and then contact an Authorized
Service Center for repairs.
BDo not attempt to repair the projector yourself, as this can...

7
Preparation
6
During a thunderstorm, do not touch the projector or the cable.
BElectric shocks can result.
Do not use the projector in a bath or shower.
BFire or electric shocks can result.
Do not look into the lens while the projector is being used.
BStrong light is emitted from the projector’s lens. If you look directly into this
light, it can hurt and damage your eyes.
Do not bring your hands or other objects close to the air outlet port.
BHeated air comes out of the air outlet port. Do not bring...

9
Preparation
8Use only the specified battery.
BIf an incorrect battery is used, it may explode or leak, and fire, injury or
contamination of the battery compartment and surrounding area may
result.
Do not put your weight on this projector.
BYou could fall or the projector could break, and injury may result.
BBe especially careful not to let young children climb onto the projector.
Disconnect the power cord plug from the wall outlet as a safety
precaution before carrying out any cleaning.
BElectric...

11
Preparation
10
About the screen
If the screen you are using is dirty, damaged or discolored, attractive
projections cannot be obtained. Do not apply any volatile substances to the
screen, and do not let it become dirty or damaged.Before carrying out cleaning and maintenance, be
sure to disconnect the power cord plug from the
wall outlet.Wipe the cabinet with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in water with a small amount
of neutral detergent in it, squeeze the...

13
Preparation
12
#Air outlet port
Do not cover this port.WARNINGDo not bring your hands or other
objects close to the air outlet
port.
BHeated air comes out of the air
outlet port. Do not bring your
hands or face, or objects which
cannot withstand heat close to
this port, otherwise burns or
damage could result.
$Connector panel 
(page 16)
%Power input socket (AC IN)
(page 22)
The accessory power cord is
connected here.
Do not use any power cord other
than the accessory power cord.
&MAIN POWER switch...

15
Preparation
14
+MENU button 
(page 24)
This button is used to display
menu screens. When a menu
screen is being displayed, it can
be used to return to a previous
screen or to clear the screen.
,NORM button 
(page 27)
This button is used to reset the
projector adjustment values to the
factory default settings.
-DIGITAL ZOOM +/- buttons 
(page 28)
These buttons are used to
enlarge certain portions of the
projected image.
.ENTER button 
(page 26)
This button is used to accept and
to activate items...

17
Preparation
Inserting the batteryInsert the lithium battery which is
supplied with the remote control
unit, making sure that the polarities
are correct.
#While pushing the battery
holder tab to the right, pull out
the battery holder.
$Insert the battery into the
battery holder so that the “+”
side is facing upwards.
%Insert the battery holder.
NOTE:
BDo not drop the remote control
unit.
BKeep the remote control unit
away from liquids.
BRemove the battery if not using
the remote control unit for long...

L
|
  AUDIO
|
RAUDIO
VIDEO INPC IN
VIDEO S2 VIDEOL
|
  AUDIO
|
R
COMPONEN
19
Preparation
18Example of connecting to video equipment
DVD player
Video deck
NOTE:
BOnly one audio system circuit is available for the AUDIO L-R input jacks
for S-VIDEO/VIDEO signals, so if you wish to change the audio input
source, you will need to remove and insert the appropriate plugs.
BIf the signal cables are disconnected or if the power supply for the
computer or video deck is turned off while the digital zoom or index...