Panasonic Lcd Monitor Dvd Receiver Cq Vd7005u Operating Instructions

							20
21CQ-VD7005U
English
……
Touch/Press and hold
OperationsOperations
DVD VTRRADIOCH-CEND
WMAWMAWMAMP3MP3MP3
CDCDCD
VCDVCDVCDDVDDVDDVD
CompatibleCompatibleDiscsDiscsCompatible
Discs
DVDDVDDVD
Track/file Selection
Fast Forward/
Fast Reverse
Note:
¡When playing a DVD, there are cases where it is not possible to return to
the start of a chapter that spans 2 titles. (apage 50)
WMAWMAWMAMP3MP3MP3
CDCDCD
VCDVCDVCDDVDDVDDVD
VCDVCDVCDDVDDVDDVDThe speed changes if the button is held down as follows.
Regular speed /1.5 times (DVD) /10 times (DVD) /20 times
Folder Selection
Title ScrollWMAWMAWMAMP3MP3MP3
WMAWMAWMAMP3MP3MP3CDCDCD
Stop
WMAWMAWMAMP3MP3MP3
CDCDCD
VCDVCDVCDDVDDVDDVDTo resume playback, touch/press 
/ [5].
Pause
WMAWMAWMAMP3MP3MP3
CDCDCD
VCDVCDVCDDVDDVDDVD
Slow Playback
VCDVCDVCDDVDDVDDVD
Repeat Play
WMAWMAWMAMP3MP3MP3
CDCDCD
VCDVCDVCDDVDDVDDVD
*
*
*
*
Repeat Play within the
Current FolderWMAWMAWMAMP3MP3MP3
To resume playback, touch/press
again or touch/press  / [5].
Note:
¡Reverse slow playback is not possible.
Scan PlayCDCDCD
Random Play
WMAWMAWMAMP3MP3MP3
CDCDCD
Random Play within the
Current FolderWMAWMAWMAMP3MP3MP3
[d]
[s]
[}]
–
–
– [{][}]
[{]
–
[3]
[y]
[d]
[[] [[]Next track/file
Beginning of the current track/file
Previous track/file (Touch/press twice.) []]
[d]
[s][[]Fast forward
Release to resume playback.
Fast reverse
Release to resume playback.
Next folder
Scrolls the title once Previous folder []]
Touch
desired 
folder
–
–
Basic Operations
¡Touch/press and hold in the pause mode.
Playback is at about 1/3 normal speed.To resume normal playback, touch/press 
/ [5].
To cancel, touch again.
To cancel, touch and hold for more
than 2 seconds again. –
–
To cancel, touch again. –
–
To cancel, touch again. –
–
To cancel, touch and hold again. –
–
* Touch panel symbols will change to indicate these current mode.  ,  {F= FOLDER (folder)} 
						

							21
22CQ-VD7005U
English
Disc Player(continued)
To switch Operation Screen ON, touch the center of touch panel or press [ENTER].
Note:
¡If no operation is performed for 8 seconds after you have touched  , the operation buttons disappear.
¡If the title/chapter number is inputted and no operation is performed for 2 seconds, playback will start from the num-
ber of the title/chapter entered. 
*2On-Screen Direct Operation (Only for DVD)
Some DVDs allow you to operate the DVD menu by
touching the screen.
In such a case, if your targeted button is located too close
to other buttons, a part of the screen may be enlarged in
order that you can press the button for sure.
Note:
¡When the current disc is not ready for the on-screen
direct operation, perform operations with the buttons
on the remote control or the unit.
¡The on-screen direct operation of the DVD menu is not
available in the DVD changer mode.
Moving operation buttons (Only for DVD)
When the operation buttons interfere with operations,
press  . The buttons are transferred as shown below.
Showing Source button and Menu button
Press  . The Source button and Menu button appear.
Source Button
(apage 14)
Menu Button
(apage 14)
OperationsOperations
DVD VTRRADIOCH-CEND
CompatibleCompatibleDiscsDiscsCompatible
Discs
*1VCDVCDVCD
DVDDVDDVD
Showing menu and 
selecting an item[DVD MENU]
[RETURN]*1
–
[]] [[]
[}] [{] –*
2
–*2
–[]] [[]
[}] [{]
d
[ENTER]d
[ENTER][RETURN]–
–
–
[ENTER]
qMenu appears.
wSelect the desired item.
eDetermine the setting.
d
d ddReturns to the previous display.
qToggles “Chapter number input
mode”, “Title number input mode”
and “Number input mode”.
wInput desired number.
ePlayback starts.
Starting Playback 
from a specific 
chapter/title
Note:
¡For retrying selection during number entry, touch/press  /[RETURN]
.
Note:
¡When the top menu does not appear even by pressing [DVD MENU]
,
press and hold the same button for more than 2 seconds.
*1Note on VCD:
For VCD, touch/press
/ 
[RETURN]instead
of / 
[DVD MENU].
Touch the numerical
key to enter a number
directly
–
to 
–
[ENTER]DVDDVDDVD
d d
d
d d *
1or or
Chapter/title Selection 
						

							22
23CQ-VD7005U
English
Note:
¡If no operation is performed for 10 seconds or  is touched, the operation buttons disappear.
¡It may not be possible to switch the language unless the unit is at the DVD menu (
aprevious page) or is at the DVD
settings. (
apage 38)
¡The language on the DVD settings takes priority when the power is turned on or the disc is loaded. 
¡The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan-
guage/angle.
OperationsOperations
DVD VTRRADIOCH-CEND
CompatibleCompatible
DiscsDiscs
Compatible
Discs
DVDDVDDVD
Subtitle Language
It is possible to change the subtitle language during play if multiple lan-
guages are recorded on the disc.
Note:
¡There may be a brief delay before the subtitles appear.
DVDDVDDVD
Audio Language
It is possible to change the audio language during play if multiple audio lan-
guages are recorded on the disc.
It is possible to switch the audio between stereo sound and monaural sound
(L or R).
DVDDVDDVD
Angle
For DVDs which contain scenes which have been shot simultaneously from
a number of different angles the same scene can be viewed from each of
these different angles during play. ( 
apage 38)
ANGLE MARK
VCDVCDVCD
Stereo & Monaural
: stereo sound
d
: the left channel audio is output on both the left and
right speakers.
d
: the right channel audio is output on both the left and
right speakers. MONO.R
MONO.L
STEREO
––¡Touch during playback.
––¡Touch during playback.
––¡Touch during playback.
––
Useful Function
DVDmode display
Repeat play
Chapter/title selection
Fast forward/fast reverseAudio Language/
Angle/
Subtitle Language
Play/stop/pauseDVD menuReturn 
						

							23
24CQ-VD7005U
English
Notes on MP3/WMA
What is MP3/WMA?
MP3* (MPEG Audio Layer-3) and WMA (Windows MediaTM
Audio) are the compression formats of digital audio. The
former is developed by MPEG (Motion Picture Experts Group),
and the latter is developed by Microsoft Corporation. Using
these compression formats, you can record the contents of
about 10 music CDs on a single CD (This figure refers to data
recorded on a 650 MB CD-R or CD-RW at a fixed bit rate of
128 kbps and a sampling frequency of 44.1 kHz).
*MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
Note:
¡MP3/WMA encoding and CD writing software programs are
not supplied with this unit.
Points to remember when making MP3/WMA files
Common
¡High bit rate and high sampling frequency are recommend-
ed for high quality sound.
¡Selecting VBR (Variable Bit Rate) is not recommended
because playing time is not displayed properly and sound
may be skipped.
¡The playback sound quality differs depending on the encod-
ing circumstances. For details, refer to the instructions of
your own encoding software and writing software.
MP3
¡It is recommended to set the bit rate to “128 kbps or more”
and “fixed”.
WMA
¡It is recommended to set the bit rate to “64 kbps or more”
and “fixed”.
¡Do not set the copy protection on the WMA file to enable
this unit to play back.
Display Information
Displayed items
Displayable characters
¡Displayable length of file name/folder name: within 128
characters. (Unicoded file and folder names are reduced by
half in the number of displayable characters.)
¡Name files and folders in accordance with the standard of
each file system. Refer to the instructions of writing soft-
ware for details.
¡ASCII character set and special characters in each language
can be displayed.
¡Some Cyrillic characters in the Unicode can be displayed.
ASCII character set
A to Z, a to z, digits 0 to 9, and the following symbols:
(space) ! ” # $ % & ’ ( )  * + , - . / : ; < = > ? @ [  ] ˆ _ ` {
| } ~
Note:
¡With some software in which MP3/WMA format files have
been encoded, the character information may not be dis-
played properly.
¡Undisplayable characters and symbols will be converted
into an asterisk (
*). 
¡It is recommended that the length of the file name is less
than 8 (excluding the file extension).
¡CD-TEXT
Disc title
Track title
¡MP3/WMA
Folder name
File name¡MP3 (ID3 tag)
Album name
Title and artist name
¡WMA (WMA tag)
Album name
Title and artist name
Caution
¡Never assign the “.mp3”, or “.wma” file name
extension to a file that is not in the MP3/WMA
format. This may not only produce noise from
the speaker damage, but also damage your
hearing.Windows Media, and the
Windows logo are trademarks,
or registered trademarks of
Microsoft Corporation in the
United States and/or other
countries/regions. 
						

							24
25CQ-VD7005U
English
Root Folder
(Root Directory)
Folder Selection
File Selection
Tree 1 Tree 2 Tree 3 Tree 4 Tree 8
(Max.)
2 1
43q
q ew
r
t
yy
5
6
7
18
8–In the order
–In the order
¡You are recommended to minimize the chances of making
a disc that contains both CD-DA files and MP3/WMA files.
¡If CD-DA files are on the same disc as MP3 or WMA files,
the songs may not play in the intended order, or some
songs may not play at all.
¡When storing MP3 data and WMA data on the same disc,
use different folders for each data.
¡Do not record files other than MP3/WMA files and unneces-
sary folders on a disc.
¡The name of an MP3/WMA file should be added by rules as
shown in the following descriptions and also comply with
the rules of each file system.
¡The file extension “.mp3” or “.wma” should be assigned to
each file depending on the file format.¡You may encounter trouble in playing MP3/WMA files or
displaying the information of MP3/WMA files recorded with
certain writing software or CD recorders.
¡This unit does not have a play list function.
¡Although Multi-session recording is supported, the use of
Disc-at-Once is recommended.
Supported file systems
ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet,
Romeo
Note: 
¡Apple HFS, UDF 1.50, Mix CD and CD Extra are not support-
ed.
Recording MP3/WMA files on a CD-media
Folder selection order/file playback order
Maximum number of files/folders
¡Maximum number of files: 511 (file and folders)
¡Maximum number of files in one folder: 255
¡Maximum depth of trees: 8
¡Maximum number of folders: 255 (Root folder is included.)
Note:
¡You can shorten the duration between data read and play-
back by decreasing the quantity of files or folders, or the
depth of the hierarchy.
¡This unit counts the number of folders irrespective of the
presence or absence of an MP3/WMA file. 
¡If the selected folder does not contain any MP3/WMA files,
the nearest MP3/WMA files in the order of playback will be
played.
¡Playback order may be different from other MP3/WMA
players even if the same disc is used.
¡“ROOT” appears when displaying the root folder name.
Recording MP3/WMA files on a CD-media
32, 44.1, 48 kHz Yes 32 k – 192 kbps Windows Media Audio Ver. 2, 8, 9*16, 22.05, 24 kHz Yes 8 k – 160 kbps MPEG 2 audio layer 3 (MP3)32, 44.1, 48 kHz Yes 32 k – 320 kbps MPEG 1 audio layer 3 (MP3)Sampling frequency VBR Bit rate Compression method
Compression formats (Recommendation:“Points to remember when making MP3/WMA files” on the previous page)
* WMA 9 Professional/LossLess/Voice are not supported.
Copyright
It is prohibited by copyright laws to copy, distribute and
deliver copyrighted materials such as music without the
approval of copyright holder except for personal use.
No warranty
Above description complies with our investigations as of
December 2006. It has no warranty for reproducibility and
displayability of MP3/WMA. 
						

							25
26CQ-VD7005U
English
Radio
[BAND] [ENTER]
Operations
DVD VTRRADIOCH-CENDBand Selection
List Selection
Refer to the next page.
Station
Selection
Seek Tuning
……
Touch/Press and hold[
[][
[]Up
[
]][
]]Down
[
[][
[]Up
[
]][
]]Down
Touch/press and hold for more than 0.5 second then release. Seeking starts.
FM 1FM 2FM 3AM
[BAND][ENTER]
LIST 1LIST 2LIST 3AM*3
There are 6 stations in each list. You can call up next 6 stations by switching from one
list to another. 
*3 From the touch panel, you can toggle only Lists 1-3, but not  . To change to  ,
touch .AMAM
Tuning
*2  The displayed contents on
the touch panel vary with
circumstances. *
2  The displayed contents on the
touch panel vary with circum-
stances. *2
*2
Preparation:
Select . (
apage 40)
ee ee / 
ALLEACHAUTO PRESETFM SETUPRADIOMENU
ALL
[]][[]
[ENTER]
qTouch “
Source Button”
.
d
wTouch 
(RADIO)on the
Source Selection
Screen.
Radio Mode Selection
Press [SRC]
to change to the desired
mode.
To switch Operation Screen ON, touch  .
ENTER
TILTO/CASP
MUTESRC MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
ASPECT
PWR VOL
P·MODE
CLOSE
CQ-VD7005U
TILT
TEXT
ENTERSRC
Frequency
Preset stationsAuto presetting
Stereo indicator Band
selection
*1 List selection
Tuning[SRC]
Source Button
*1Appears when  is selected. (
apage 40)
ee ee / 
ALLEACHAUTO PRESETFM SETUPRADIOMENU
ALL 
						

							26
27CQ-VD7005U
English
……
Touch/Press and hold
Manual Preset
Memory
Up to 6 stations can be
preset in each band. 
Preset Station
Calling
to
Auto Preset
Memory
6 stations with first to 6th highest in signal
strength of each band will be preset.[BAND]
to
Preset Swap
qSelect the list and the preset number that contains the station to be interchanged 
(see “Preset station calling” above).
w Select the list and hold down the preset number that contains the targeted channel
for more than 2 seconds.
The preset station selected in the step qis
interchanged with the targeted preset chan-
nel selected in the step w(Preset Swap).
Select a band and frequency.
¡Touch and hold for more than 2 seconds.
¡The frequency blinks once, and a receiving station is saved in the memory.
New stations overwrite existing saved stations.
¡Touch/press and hold for more than 2 seconds.
¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning)
New stations overwrite existing saved stations.
¡Touch/press and hold for more than 2 seconds.
¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning)
New stations overwrite existing saved stations.
[BAND]
In total 18 FM stations are
automatically preset. 
A station preset is inter-
changeable with another
station preset.
B
––
––
[ENTER] [ENTER]
Six stations are automati-
cally preset in each band.
A
to––
Preset Memory
blinks once
Select a band.
Select a band or a list.
¡Touch desired preset button.
18stations with first to 18th highest in signal
strength of all FMs will be preset at once.
Preparation:
Select . (
apage 40)
ee ee / 
ALLEACHAUTO PRESETFM SETUPRADIOMENU
EACH
Preparation:
Select . (
apage 40)
ee ee / 
ALLEACHAUTO PRESETFM SETUPRADIOMENU
ALL
Preparation:
Select . (
apage 40)
ee ee / 
ALLEACHAUTO PRESETFM SETUPRADIOMENU
ALL 
						

							27
28CQ-VD7005U
English
AV1/AV2
Note:
¡You can set up the system so that the AV mode is not
selected (source skip). (
apage 39) (AV set to NAVI
INPUT is not skipped even if  is set to
.)
¡If no operation is performed for 10 seconds or  is
touched, the operation buttons disappear.
¡AV terminal is not used for the Panasonic car 
navigation system (available in future). Refer to
for setting. (
aSystem Upgrade
Guidebook)
NAVI SETUP
ON
SOURCE SKIP
ENTER
TILTO/CASP
MUTESRC MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
ASPECT
PWR VOL
P·MODE
CLOSE
CQ-VD7005U
TILT
TEXT
ENTERSRC
Preparation:
¡Connect an optional external device to the AV1/AV2.
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
[SRC]
Source Button
To switch Operation Screen ON, touch the center of
touch panel or press [ENTER]. Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are
connected.
qTouch “
Source Button”
.
d
wTouch /
(AV1/AV2)on the
Source Selection
Screen.
AV Mode Selection
Press [SRC]
to change to the desired
mode.[ENTER] 
						

							28
29CQ-VD7005U
English 
						

							29
30CQ-VD7005U
English
Settings
Preparation: 
To display menu in French, Execute  (Language setting). (
apage 33) MENU DISPLAY
DISPLAY UNIT
CLOCK
ID-CODE
MEMORY CLEAR
OTHER
DIMMER
PICTURE
SOUND SETUP
GRAPHIC-EQ
CS Auto 
SP SETUP
SP LEVEL
TIME ALIGNMENT
SOURCE LEVEL
CROSS OVER 
LANGUAGE
DISPLAY
DVD SOUND 
MULTI-CH
NAVI SETUP
CAMERA SETUP
SOURCE SKIP
INPUT SELECT
OUTPUT SELECT
H-F SETUP
FM SETUP
AM SETUP
XM SETUP
SIRIUS SETUP
(*1) Please refer to the System Upgrade Guidebook.(*1) Setting for Sirius satellite radio(*1) Setting for XM radio(
apage 40) Setting for AM stations(
apage 40) Setting for FM stations Radio RADIO
(*1) Hands-free setting(*1) Output selection(*1) Input selection(
apage 39) Source skip(*1) Rear view camera setting(*1) Navigation setting Input/output
INPUT/OUTPUT
(apage 39) Sound output selection(
apage 39) DVD sound setting(
apage 38) Appearance of DVD image(
apage 38) Language Setting DVD DVD
(apage 37) Cut off frequency(
apage 37) Setting the AV1/AV2 input level(
apage 37) Delay time setting of each speaker(
apage 36) Adjusting the output balance of each speaker(
apage 36) Setting of the absence/presence of each speaker(
apage 35) CS Auto setting(
apage 34) Setting and adjusting of graphic equalizer(
apage 34) Sound setting Audio AUDIO
(apage 34) Display appearance(
apage 34) Adjusting the brightness Screen SCREEN
(apage 33) Other settings(
apage 33) Memory clearance(
apage 32) ID Code Setting(
apage 32) Clock setting(
apage 32) Display adjustment User USER