Panasonic Kx Th111 Operating Instructions Manual

Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp61
4To complete the transfer, press {SP-
PHONE}.
Note for handset and base unit:
LIf the paged party does not answer 
within 1 minute after you hang up, your 
extension rings and the call is returned 
to your phone. You can speak to the 
caller again by pressing {C} on the 
handset or the CELLULAR SELECT 
button ({1} to {5}) that is flashing on the 
base unit.
LTo transfer a cellular call to the...

Using a Cellular Phone with this Unit
62For assistance, please visit http://www.panasonic.com/phonehelp
Conference calls
Conference call with a cellular 
call and land line call 
Y^
While you are talking on a cellular call, you 
can make or answer a 2nd call on the land 
line, and then combine the calls to 
establish a conference call.
1During a cellular call, press {HOLD} 2 
times.
2To answer a land line call, press {C}.
To make a land line call, press {C}, 
then dial the phone number.
3When the land...

Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp63
Conference call with a cellular 
call and an intercom call 
Y^
While you are talking on a cellular call, one 
more extension can join the conversation 
and establish a conference call.
1During a cellular call, press 
{INTERCOM}.
2To page the base unit, press {0}.
To page another handset, enter its 
extension number ({1} to {8}).
3When the paged party answers, press 
{CONF} to make a conference call....

Useful Information
64For assistance, please visit http://www.panasonic.com/phonehelp
Headset (optional)
Setting up a Bluetooth wireless 
headset ^
If your headset is Bluetooth wireless 
technology compatible to this product, you 
can have a hands-free phone conversation 
by registering your headset to the base 
unit.
Important:
LThe following procedures must be 
performed using the base unit.
LThere can only be one active Bluetooth 
headset connection at a time.
Registering a headset
Important:
LFor more...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp65
Connecting the corded headset 
Y
Connecting a headset to the handset 
allows hands-free phone conversations. 
We recommend using the Panasonic 
headset noted on page 4.
LHeadset shown is KX-TCA86.
Switching a call between headset and 
handset speakerphone
To switch to the handset speakerphone, 
press {s}. 
To return to the headset, press {C}.
Additional accessories
Sales and support information
LTo order replacement...

Useful Information
66For assistance, please visit http://www.panasonic.com/phonehelp
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display messageCause/solution
BusyLThe called handset or base unit is in use.
LOther users are using the cellular line. Wait until the 
CELLULAR SELECT button is lit in yellow-green on the 
base unit and [ shown in the top center disappears 
from the handset display.
LPrivacy mode is on for the call you tried to join...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp67
No items storedLYour phonebook, caller list, or redial list is empty.
L“Customize ring” is empty.
No link to base. 
Move closer to base 
and try again.LThe handset has lost communication with the base unit. 
Move closer to the base unit, and try again.
LConfirm that the base unit’s AC adaptor is plugged in.
LRaise the base unit antennas.
LThe handset’s registration may have been canceled. 
Re-register the handset (page...

Useful Information
68For assistance, please visit http://www.panasonic.com/phonehelp
Troubleshooting
General use
Programmable settings
ProblemCause/solution
The unit does not work.LMake sure that the battery is installed correctly and fully 
charged (page 10).
LCheck the connections (page 9).
LUnplug the base unit’s AC adaptor to reset the unit. 
Reconnect the adaptor and try again.
LThe handset has not been registered to the base unit. 
Register the handset (page 43).
I cannot hear a dial tone.LConfirm...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp69
Making/answering calls, intercom
ProblemCause/solution
Static is heard, sound 
cuts in and out. 
Interference from other 
electrical units.LMove the handset and base unit away from other 
electrical appliances (microwave, wireless LAN 
appliance, etc.).
LMove closer to the base unit.
LRaise the base unit antennas.
LTurn on the clarity booster feature (page 21).
LIf your base unit is connected to a telephone line with...

Useful Information
70For assistance, please visit http://www.panasonic.com/phonehelp
Phonebook
Caller ID
ProblemCause/solution
Copying stopped with an 
item displayed.LThe destination handset may have lost communication 
with the base unit, or the destination unit user may have 
pressed {C} or {s} on the handset or {SP-PHONE} 
on the base unit.
The displayed phonebook item was not copied to the 
unit. Press {OFF} on the handset or {STOP} on the 
base unit. Confirm that the destination unit is not in use...