Home > Panasonic > Cell Phone > Panasonic Kx Tgh260 Operating Instructions Manual

Panasonic Kx Tgh260 Operating Instructions Manual

Here you can view all the pages of manual Panasonic Kx Tgh260 Operating Instructions Manual. The Panasonic manuals for Cell Phone are available online for free. You can easily download all the documents as PDF.

Page 11

Battery charging
C
harge for about 7 hours.
R Confirm  “Charging ” is displayed ( ).
R W

hen the batteries are fully charged,
“ Fully charged ” is displayed. Note when setting up
Note for connections
R
T

he AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to...

Page 12

Controls
Handset
Speaker
M N
 (TALK) Dial keypad (
*:  TONE)M
Z N (SP-PHONE: Speakerphone) Microphone
Receiver
Display
M
O
FF N M
FLASH NMCALL WAIT NM N
 (NOISE REDUCTION/Smart
function key)  indicator
Charge contacts n
C
ontrol type  
Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display. After a cellular phone is paired,
M CELL N is displayed.  
N
avigator key
– MD N,  MC N,  MF N, or  ME N: Scroll through
various lists and items.
–  (Volume: 
MD N 
 or MC...

Page 13

Display icons/Indicators
Handset display items
Item Meaning
Within base unit range
Out of base unit range
The landline is in use.
R
W
hen flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received. A cellular line is in use.
*
 1
R When flashing:
The cellular call is put on
hold.
R When flashing rapidly:
A cellular call is being
received. A cellular phone is
c

onnected. *1
 Ready to make/
receive cellular calls.
R When turned off:
A cellular phone is not
connected...

Page 14

Status Meaning
Light off – A cellular phone is not paired to the base unit.
– A cellular phone is not connected to the base unit
(page 18). Bluetooth HEADSET indicator on the
b

ase unit
The HEADSET indicator shows the Bluetooth
headset status. Status Meaning
On A Bluetooth headset is c
onnected to the base unit.
Ready to use it.
Flashing – A Bluetooth headset is in u
se.
– The base unit is searching for the paired Bluetooth
headset.
– The base unit is pairing a headset.
Flashing
r
 apidly A landline...

Page 15

Other settings
Smart function key (  key)
T
he Smart function key (  key) is located
o

n the bottom of the handset and informs you
with its flashing to allow you to activate the
following features by simply pressing this key.
n When the   indicator flashes rapidly,
y

ou can:
– Answer the call (outside call, intercom). (page 21, 24)
– Stop paging.
– Stop the alarm sound. (page 40)
n When the   indicator flashes slowly in
s

tandby mode, you can:
– Listen to new messages. (page 52)
– Listen to new voice...

Page 16

Link to cell feature
Y ou can connect your base unit and cellular
phone using Bluetooth wireless technology, so
that you can make or answer cellular calls
using your phone system. This allows you to:
– use the unit to talk on cellular calls even if some areas of your home have poor
cellular reception, simply by placing your
cellular phone in an area with good
reception.
– talk on cellular calls even if your cellular phone is in your pocket or bag.
– enjoy cordless cellular calls even if your cellular...

Page 17

2
Mb N:  “Yes ” a  M SELECT N
R When the cellular phone is unpaired,
the CELL indicator is turned off.
3 MOFF N Link to cell settings
Selecting which unit receives
c
 ellular calls
You can select which unit rings and receives
calls for a cellular line. When  “All ” is
selected, all handsets and the base unit ring.
1 For CELL 1:  MMENU N (right soft key)
#6271
For CELL 2:  MMENU N (right soft key)
#6272
2 Mb N: Select the desired handset or  “All ”.
a  M SAVE N
3 MOFF N
Note:
R When you select a specific...

Page 18

Bluetooth devices are disconnected from the
b
ase unit. This feature allows the base unit to
try to reconnect the Bluetooth devices at
regular intervals when it returns within base
unit range. You can set the interval. The
default setting is  “1 min ”.
Important:
R When 3 Bluetooth devices (2 cellular
phones and 1 headset) are paired to the
base unit, only 2 Bluetooth devices can be
used with the unit at the same time, and the
base unit loses its connection from other
Bluetooth devices. To automatically...

Page 19

When you use the landline again
B
efore connecting the telephone line to the
base unit, select  “Off ” in step 2, “Cellular line
only mode (If you do not use the landline)”,
page 18. Cellular line selection
T
 his feature determines which cellular line is
selected to make cellular calls when:
– you press  MCELL N on the handset.
– you press  M N
 
or  MZ N on the handset
while the cellular line only mode is turned
on.
The following settings are available:
– “Manual ” (default): You can select the
desired...

Page 20

Making cellular calls
I mportant:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 13).
1 Lift the handset and dial the phone
number.
RTo correct a digit, press  MCLEAR N.
2 MCELL N
R The...
Start reading Panasonic Kx Tgh260 Operating Instructions Manual

Related Manuals for Panasonic Kx Tgh260 Operating Instructions Manual

All Panasonic manuals