Panasonic Kx Tgh260 Operating Instructions Manual

Operating Instructions
Link-to-Cell Bluetooth Convergence Solution
Model No.KX-TGH260
KX-TGH262
KX-TG472SK KX-TGH263
KX-TG473SK KX-TGH264
 
   
 
Model shown is KX-TGH260.
Before initial use, see “Getting Started”
on page 10.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte  “Guía Rápida Española”, página 72.
For assistance, visit our Web site: http://www.panasonic.com/help
 for customers
in the...

Introduction
Model composition 
.......................................3
Accessory information  ..................................3
Important Information
For your safety .............................................6
Important safety instructions ........................7
For best performance ...................................7
Other information .........................................8
Specifications  ...............................................9
Getting Started
Setting up...

Model composition
Series Model No. Base unit Handset
Part No. Part No. Quantity
KX-TGH260
s eries KX-TGH260 KX-TGH260 KX-TGHA20
1
KX-TGH262 KX-TGH260 KX-TGHA20 2
KX-TG472SK KX-TGH260 KX-TGHA20 2
KX-TGH263 KX-TGH260 KX-TGHA20 3
KX-TG473SK KX-TGH260 KX-TGHA20 3
KX-TGH264 KX-TGH260 KX-TGHA20 4Accessory information
Supplied accessories
No. Accessory item/
O

rder number Quantity
KX-TGH260 KX-TGH262
K
X-TG472SK KX-TGH263
K
X-TG473SK KX-TGH264
A AC adaptor/PNLV226Z 1 111
B Telephone line cord/
P

QJA10075Z 1
1...

Accessory item Order number
Rechargeable
b atteries HHR-4DPA
* 1
R To order, please visit
http://www.panasonic.com/batterystore
Battery type:
–
 Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
T-adaptor KX-J66
Range extender KX-TGA405*
 2
Key detector KX-TGA20*
 3*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*

2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not...

Your Bluetooth headset
* 1
:  1 max.
(for a wireless hands-free conversation: page 49) *1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For
m
 ore details and the list of compatible cellular phones, please visit our Web site:
http://www.panasonic.com/link2cell Trademarks
R
T

he Bluetooth ®
 word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.,
and any use of such marks by Panasonic Corporation is under license.
R All other trademarks identified...

For your safety
T
o prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product. WARNING
Power connection
R
U

se only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a...

R
This product is unable to make calls when:
– the handset batteries need recharging orhave failed.
– there is a power failure. Battery
R
W

e recommend using the batteries noted
on page 4.  USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when...

R
If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception. Environment
R
K

eep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time,...

Specifications
R
S
tandard:
DECT 6.0 (Digital Enhanced Cordless
Telecommunications 6.0)
Bluetooth wireless technology 2.1
R Frequency range:
1.92 GHz to 1.93 GHz (DECT)
2.402 GHz to 2.48 GHz (Bluetooth)
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit:
Standby: Approx. 1.1 W
Maximum: Approx. 4.0 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 1.8 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
For...

Setting up
Connections
R
I
f you do not connect the telephone line
cord and use only cellular lines, set the
cellular line only mode to use this unit more
conveniently (page 18).
n  Base unit Connect the AC adaptor to the unit by
p

ressing the plug firmly. Fasten the cord by hooking it.
Connect the AC adaptor to the power
o

utlet. Connect the telephone line cord to the
u

nit, then to the single-line telephone jack
(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is
r

equired if you...