Panasonic Kx Tgf372 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Kx Tgf372 Operating Instructions Manual. The Panasonic manuals for Cell Phone are available online for free. You can easily download all the documents as PDF.
Page 51
2Mb N: Select the desired group. a M SELECT N R “ ” is displayed next to the selected group numbers. R To cancel the selected group: Mb N: Select the group. a Press M SELECT N again. “ ” disappears. 3 MSAVE N 4 Proceed with the operation for your unit. Handset: M OFF N Base unit: M EXIT N Baby monitor This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or place. The monitored handset (placed in a baby’s...
Page 52
Note: RIf you edit a phonebook entry which is assigned for monitoring, the edited entry does not transfer to the monitor. n By entering phone numbers: 1 MMENU N#268 2 Mb N: “On ” a M SELECT N 3 Mb N: Select “Outgoing call ” to monitor from an outside line. a M EDIT N a M ADD N 4 Mb N: “Manual ” a M SELECT N 5 Enter the desired name. a M OK N 6 Enter the desired number. a M OK N a M SELECT N R “Baby monitor ” will be displayed. Note: R The registered name/number is displayed. Turning off the...
Page 53
– To answer the call with the base unit,press MZ N 3 times. *1 *1 If MMUTE N is pressed, press MZ N 2 times. n When monitoring from an outside line: Answer the call. If you want to respond from your monitoring phone, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0. Note: R The unit disconnects the call automatically after 2 minutes. Other programming Changing the handset name The default handset name is “Handset 1 ” to “ Handset 6 ”. You can customize the...
Page 54
Using Caller ID serviceImportant: R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features Handset / Base unit When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed: –“Out of...
Page 55
Handset 1 MC N CID 2 Press MC N to search from the most recent call, or MD N to search from the oldest call. 3 To call back, press MSELECT N. To exit, press MOFF N. 4 MCELL N R The unit starts dialing when: – only 1 cellular phone is paired. – a specific line is set to make cellular calls (page 20). 5 Mb N: Select the desired cellular phone. a M SELECT N Base unit 1 MCID N 2 Press MC N to search from the most recent call, or MD N to search from the oldest call. 3 To call back, press MCELL 1 N or...
Page 56
area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows: – When the call is being received, the CallerID number is displayed in the same format as the edited number. – After the call has ended, the caller’s phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the unit to ignore the area code of callers in your area,...
Page 57
Copying phonebook from acellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones (not paired) to the unit’s phonebook. A cellular phone must be compatible with Bluetooth wireless technology. Important: R Your cellular phone must support Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If a copied entry has 2 or more phone numbers, each phone number (6 max.) is stored as a separate entry with the same name. R...
Page 58
–“Trunk prefix ”: A trunk prefix; the initial digit(s) to be dialed in a domestic call, prior to the area code. Handset 1 MMENU N 2 To store “International code ”: #117 To store “Country code ”: #118 To store “Trunk prefix ”: #119 3 Enter the desired number. a M SAVE N 4 MOFF N Note: R After you copy the entries, confirm that the numbers were transferred correctly. Link to Cell app For Android™ users The free Link to Cell app helps you integrate your Android phone with your DECT phone for...
Page 59
–Android phone: Bluetooth must be turned on. – Android phone: [Application Alerts manager] *1 must be turned on. – Handset or base unit: “ Alert On/ Off ” must be turned on (page 59). R If this feature does not work, turn on your device’s Bluetooth feature, unplug the base unit’s AC adaptor, and then reconnect it. *1 Turning on [Application Alerts manager] Use the following procedure after installing the Link to Cell app. Android 2.x: Open your device’s [Settings] app. a Tap [Accessibility] . a...
Page 60
–“Off ”: Voice announcement is not available as alert. You can configure this setting using either the base unit or one of the handsets. Handset / Base unit 1 For CELL 1: MMENU N#6031 For CELL 2: MMENU N#6032 2 Mb N: Select the desired setting. a M SAVE N 3 Proceed with the operation for your unit. Handset: M OFF N Base unit: M EXIT N Selecting the alert tone Handset 1 For CELL 1: MMENU N#6041 For CELL 2: MMENU N#6042 2 Mb N: Select the desired setting. 3 MSAVE N a M OFF N Temporary alert off...