Panasonic Kx Tgf372 Operating Instructions Manual

Setting up
Connections
RIf you do not connect the telephone line
cord and use only cellular lines, set the
cellular line only mode to use this unit more
conveniently (page 19).
n  Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the single-line telephone jack
(RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a...

Battery charging
Charge for about 7 hours.
RConfirm  “Charging ” is displayed (
).
R When the batteries are fully charged,
“Fully charged ” is displayed.
Note when setting up
Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to...

Controls
Handset
Belt clip holesSpeakerMN (TALK)Headset jackDial keypad ( *: TONE)MZ N (SP-PHONE: Speakerphone)MicrophoneReceiverDisplayM OFF NMFLASH N M CALL WAIT NMCALL BLOCK NCharge contacts
nControl type Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display. After a cellular phone is paired,
M CELL N is displayed.
 Navigator key
– MD N,  MC N,  MF N, or  ME N: Scroll through
various lists and items.
– VOL. (Volume:  MD N or  MC N): Adjust the
receiver or...

MERASE NMANSWER ON/OFF N
ANSWER ON/OFF indicator
M LOCATOR N M INTERCOM N
R You can locate a misplaced handset
by pressing  MLOCATOR N.
MEXIT NMN (PLAY/STOP)
Message indicator
M CELL 1 N
CELL 1 indicator
M CELL 2 N
CELL 2 indicator
M APP ALERTS NDesk stand/Wall mounting adaptor
RThe adaptor is a removable
attachment for desk stand or wall
mounting use (page 70).
MicrophoneDial keypad ( *: TONE)
n Control type
 Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the...

ItemMeaning
Cell1 in
useSomeone is using the
corresponding line.
Cell2 in
use
C1&C2 in
use
Line in
use
*1 Corresponding lines (1, 2: cellular line)are indicated next to the item.
*2 During a cellular call, the item is not displayed even though the feature is
activated.
*3 Corresponding lines (1, 2: cellular line, L: landline) are indicated next to the item. If
all lines are turned off, no line is indicated.
Base unit display items
ItemMeaning
Ringer volume is off. *1
(page 47, 48)
Silent mode is on....

Language settings
Display languageYou can select either  “English ” or
“ Español ” as the display language. The
default setting is  “English ”.
Handset / Base unit
1 MMENU N#110
2 Mb N: Select the desired setting.  a
M SAVE N
3 Proceed with the operation for your unit.
Handset:  M OFF N
Base unit:  M EXIT N
Voice guidance language
You can select either  “English ” or
“ Español ” as the voice guidance language
of the answering system. The default setting is
“ English ”.
Handset
1 MMENU N#112
2 Mb N:...

Link to cell featureYou can connect your base unit and cellular
phone using Bluetooth wireless technology, so
that you can make or answer cellular calls
using your phone system. This allows you to:
– use the unit to talk on cellular calls even if some areas of your home have poor
cellular reception, simply by placing your
cellular phone in an area with good
reception.
– talk on cellular calls even if your cellular phone is in your pocket or bag.
– enjoy cordless cellular calls even if your cellular...

2Mb N:  “Yes ” a  M SELECT N
R When the cellular phone is unpaired,
the CELL indicator is turned off.
3 MOFF N
Link to cell settings
Selecting which unit receives
cellular calls
You can select which unit rings and receives
calls for a cellular line. When  “All ” is
selected, all handsets and the base unit ring.
Handset
1 For CELL 1:  MMENU N#6271
For CELL 2:  MMENU N#6272
2 Mb N: Select the desired handset or  “All ”.
a  M SAVE N
3 MOFF N
Note:
R When you select a specific handset to
receive calls for a...

Bluetooth devices out of base unit range, the
Bluetooth devices are disconnected from the
base unit. This feature allows the base unit to
try to reconnect the Bluetooth devices at
regular intervals when it returns within base
unit range. You can set the interval. The
default setting is “1 min ”.
Important:
R When 3 Bluetooth devices (2 cellular
phones and 1 headset) are paired to the
base unit, only 2 Bluetooth devices can be
used with the unit at the same time, and the
base unit loses its connection...

– Bluetooth connections from cellularphones or headset are disconnected. If
the auto connection is turned on
(page 18), the cellular phones are
reconnected.
–
 will be displayed on the handset
momentarily. The handset can be used
once 
 is displayed.
When you use the landline again
Before connecting the telephone line to the
base unit, select  “Off ” in step 2, “Cellular line
only mode (If you do not use the landline)”,
page 19.
Cellular line selection
This feature determines which cellular line is...