Panasonic Kx Tga939 Installation Manual

							Thank you for purchasing a Panasonic digital cordless phone.
Please read this installation manual before using the unit and 
save it for future reference.
For assistance, visit our website:
http://www.panasonic.com/help 
for customers in the U.S.A. or 
Puerto Rico. This unit is an additional hands
et compatible with the following 
Panasonic Digital Cordless Phones: 
KX-TG9391/KX-TG9392
You must register this handset wit h your base unit before it can 
be used. This installation manual describes only the steps 
needed to register and begin using the handset. Please read 
the base unit’s operating inst ructions for further details.
Charge the batteries for about 7 hours before initial use.
Additional Digital Cordless Handset
Model No. 
KX-TGA939
Installation Manual
PNQX1455ZA  DM0708SY0
TGA939(e).fm  Page 1  Friday, June 27, 2008  5:40 PM 
						

							2For assistance, please visit http://www.panasonic.com/help
Supplied accessories
*1 Both of the AC adaptors function well with the charger.
*2 Please read the base unit’s operating instructions for replacement battery information.
*3 The handset cover comes attached to the handset.
Note:
L Please read the base unit’s operating instructions for additional/
replacement accessories.
Sales and support information
LTo order additional/replacement accessories, call 1-800-332-5368.
L TTY users (hearing or speech impa ired users) can call 1-866-605-
1277.
Connection
Note:
L Use only the supplied Panasonic AC adaptor PQLV209 or PQLV219.
Accessory item/Order numberQuantity
Charger/PNLC1001YT 1
AC adaptor for charger
*1/PQLV209T or PQLV219Z 1
Rechargeable batteries
*22
Handset cover
*3/PNYNTGA430BR 1
Belt clip/PNKE1004Z1 1
Hooks
(120 V AC, 
 60 Hz)
TGA939(e).fm  Page 2  Friday, June 27, 2008  5:40 PM 
						

							For assistance, please visit http://www.panasonic.com/help3
LThe AC adaptor must remain connected at all times. (It is normal for 
the adaptor to feel warm during use.)
Battery installation and battery charge
Important:
LUse the supplied rechargeable batteries (Part No. HHR-55AAABU).
L When installing the batteries:
– Wipe the battery ends ( S, T) with a dry cloth.
– Avoid touching the battery ends ( S, T) or the unit contacts.
– Confirm correct polarities ( S, T).
L When replacing the batteries:
– USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
– Do NOT use Alkaline/Manganese/Ni-Cd batteries.
– We recommend using the Panasonic rechargeable batteries noted 
in the base unit’s operating instructions for replacement battery 
information.
1Press the notch on the handset cover firmly, and slide it in the 
direction of the arrow. 
2Insert the batteries negative ( T) end first. Close the handset cover.
3Place the handset on the charger for about 7 hours before initial 
use.
Note:
L If the batteries are fully charged, but the operating time seems to be 
shorter, clean the battery ends ( S, T ) and the charge contacts with a 
dry cloth.
TGA939(e).fm  Page 3  Friday, June 27, 2008  5:40 PM 
						

							4For assistance, please visit http://www.panasonic.com/help
Attention:
Registering a handset to the base unit
1
Handset:
Lift the handset and press {OFF }.
2Base unit:
Press and hold { LOCATOR} for about 5 seconds until the registration 
tone sounds.
L If all registered handsets start ringing, press the same button to 
stop. Then repeat this step.
3Handset:
Place the handset on the charger.
LContinue the operation even when the handset display shows 
“Registering”.
4With the handset still on the char ger, wait until a long beep sounds 
and  w stops flashing.
Note:
L If an error tone sounds, or if w  is still flashing, register the handset 
according to the base unit’s operating instructions.
Display language
1
{ MENU } i  {#}{ 1}{1}{0}
2{V}/{^}: Select the desired setting.
3Press the middle soft key to save.  i {OFF }
A nickel metal hydride battery that is 
recyclable powers the product you 
have purchased.
Please call 1-800-8-BATTERY (1-
800-822-8837) for information on how 
to recycle this battery.
TGA939(e).fm  Page 4  Friday, June 27, 2008  5:40 PM 
						

							For assistance, please visit http://www.panasonic.com/help5
Wall mounting
1
Drive the screws (not supplied) into the wall.
2Mount the charger (A), then slide it down ( B) and to the right ( C) 
until it is secure.
Belt clip
You can hang the handset on your belt  or pocket using the supplied belt 
clip.
N To attach the belt clip NTo remove the belt clip
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)A B
C
TGA939(e).fm  Page 5  Friday, June 27, 2008  5:40 PM 
						

							6For assistance, please visit http://www.panasonic.com/help
For your safety
To prevent severe injury and loss of life/property, read this section 
carefully before using the product to ensure proper and safe operation of 
your product.
WARNING
Power connection
LCompletely insert the AC adaptor/power plug into the power outlet. 
Failure to do so may cause electric shock and/or excessive heat 
resulting in a fire.
L Regularly remove any dust, etc. from the AC adaptor/power plug by 
pulling it from the power outlet,  then wiping with a dry cloth. 
Accumulated dust may cause an insulation defect from moisture, etc. 
resulting in a fire.
L Unplug the product from power outlets if it emits smoke, an abnormal 
smell, or makes an unusual noise. These conditions can  cause fire or 
electric shock. Confirm that  smoke has stopped emitting and contact 
the Panasonic Call Center at 1-800-211- PANA (1-800-211-7262).
Installation
L To prevent the risk of fire or elec trical shock, do not expose the product 
to rain or any type of moisture.
L Do not place or use this product near automatically controlled devices 
such as automatic doors and fire alarms. Radio waves emitted from 
this product may cause such devices  to malfunction resulting in an 
accident.
CAUTION
Installation and relocation
L The AC adaptor is used as the main disconnect device. Ensure that 
the AC outlet is installed near the product and is easily accessible.
TGA939(e).fm  Page 6  Friday, June 27, 2008  5:40 PM 
						

							For assistance, please visit http://www.panasonic.com/help7
Battery
LWe recommend using the supplied ba tteries or additional/replacement 
batteries noted in the base unit’s operating instructions for 
replacement battery information.  USE ONLY rechargeable Ni-MH 
batteries AAA (R03) size.
L Do not mix old and new batteries.
L Do not open or mutilate the batteries. Released electrolyte from the 
batteries is corrosive and may cause burns or injury to the eyes or skin. 
The electrolyte may be toxic if swallowed.
L Exercise care when handling the ba tteries. Do not allow conductive 
materials such as rings, bracelets  or keys to touch the batteries, 
otherwise a short circuit may cause  the batteries and/or the conductive 
material to overheat and cause burns.
L Charge the batteries provided with or identified for use with this 
product only, in accordance with  the instructions and limitations 
specified in this manual.
L Only use a compatible charger to charge the batteries. Do not tamper 
with the charger. Failure to follow  these instructions may cause the 
batteries to swell or explode.
Other information
L Operating the product near electrical appliances may cause 
interference. Move away from the electrical appliances.
L Use only the power cord and batteries  indicated in this manual. Do not 
dispose of batteries in a fire. T hey may explode. Check with local 
codes for possible special  disposal instructions.
Routine care
LWipe the outer surface of the product with a soft moist cloth.
L Do not use benzine, thinner, or any abrasive powder.
TGA939(e).fm  Page 7  Friday, June 27, 2008  5:40 PM 
						

							8For assistance, please visit http://www.panasonic.com/help
Notice for product disposal, transfer, or return 
LThis product can store your private/ confidential information. To protect 
your privacy/confidentiality, we  recommend that you erase the 
information such as phonebook or caller list entries from the memory 
before you dispose of, transfer, or return the product.
FCC and other information
This equipment is hearing aid compatible as defined by the FCC in 47 
CFR Section 68.316.
When you hold the phone to your ear, noise might be heard in your 
Hearing Aid. Some Hearing Aids are not adequately shielded from 
external RF (radio frequency) energy . If noise occurs, use an optional 
headset accessory or the speakerphone option (if applicable) when 
using this phone. Consult with y our audiologist or Hearing Aid 
manufacturer about the availability  of Hearing Aids which provide 
adequate shielding to RF energy commonly emitted by digital devices.
WHEN PROGRAMMING EMERGENCY  NUMBERS AND(OR) MAKING 
TEST CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the dispatcher the reason for  the call.
2) Perform such activities in the of f-peak hours, such as early morning or 
late evenings.
This device complies with Part 15 of  the FCC Rules. Operation is subject 
to the following two conditions:
(1) This device may not cause harmful  interference, and (2) this device 
must accept any interference received, including interference that may 
cause undesired operation.
Privacy of communications may not be ensured when using this phone.
TGA939(e).fm  Page 8  Friday, June 27, 2008  5:40 PM 
						

							For assistance, please visit http://www.panasonic.com/help9
CAUTION:
Any changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate this 
device.
NOTE:
This equipment has been tested and found to comply with the limits for 
a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential instal lation. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that interference 
will not occur in a particular inst allation. If this equipment does cause 
harmful interference to radio or  television reception, which can be 
determined by turning the equipment  off and on, the user is encouraged 
to try to correct the interference by one or more of the following 
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
– Consult the dealer or an experienc ed radio/TV technician for help.
FCC RF Exposure Warning:
L This product complies with FCC radiat ion exposure limits set forth for 
an uncontrolled environment. 
L This handset may not be collocated  or operated in conjunction with 
any other antenna or transmitter.
L The handset may be carried and operated with only the specific 
provided belt-clip. Other non-test ed belt-clips or similar body-worn 
accessories may not comply and must be avoided.
Notice:
L FCC ID can be found inside the battery compartment or on the bottom 
of the unit.
TGA939(e).fm  Page 9  Friday, June 27, 2008  5:40 PM 
						

							10For assistance, please visit http://www.panasonic.com/help
Compliance with TIA-1083 standard:
NoticeTelephone handsets identified with this logo have 
reduced noise and interference when used with T-Coil 
equipped hearing aids and cochlear implants.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
LÎé-~ ê”ãÄÖâé
ö!ª
á›ãÒá.3.ÐáÅ”ãÄ Ö]âé
ö!ªê:Þ1‘
ûãåùÔ•åÞá”°$ âêãÄÖ]æÅ¿áê
ÚããÒáC!åäé(oF,ê)LÒÆèùÔ•
L
ôr}
LThis product is designed for use in the United States of America. 
Sale or use of this product in other countries may violate local laws.
LCet appareil est conçu pour être utilisé aux États-Unis d’\
Amérique.  La vente ou l’emploi de cet appareil dans certains autres pays peut 
constituer une infraction à la législation locale.
LEste producto está diseñado para usarse en los Estados Unidos de  América. 
La venta o el empleo de este producto en ciertos países puede 
constituir violación de la legislación local.
TGA939(e).fm  Page 10  Friday, June 27, 2008  5:40 PM