Panasonic Kx Tg7531 Operating Instructions Manual

Programming
21For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 21)
– using the direct commands (page 22)
LDirect command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2Press {V}, {^}, {>}, or {

Programming
22For assistance, please visit http://www.panasonic.com/help
*1 If you program these settings using one of the handsets, you do not need to 
program the same item using another handset.
Programming using the direct commands
1
{MENU} i {#}
2Enter the desired code.
3Select the desired setting. i {SAVE}
LThis step may vary depending on the feature being programmed. Initial setting
Ringer setting Ringer volume–
Ringer tone–
Silent mode
–On/Off
–Start/End26
Set date & time Date and time
*113...

Programming
23For assistance, please visit http://www.panasonic.com/help
LTo exit the operation, press {OFF}.
Note:
LIn the following table, < > indicates the default settings.
FeatureCodeSettingSystem*1Page
Caller list{2}{1}{3}––30
V.M. access
(V.M.: Voice mail){3}{3}{0}––40
Intercom{2}{7}{4}––41
Ringer volume
*2
(Handset){1}{6}{0}{1}–{6}: Level 1–6  
{0}: Off––
Ringer tone
(Handset)
*3, *4, *5{1}{6}{1}{1}–{5}: Tone 1–5

{6}–{0}: Melody 1–5––
Silent mode
(On/Off){2}{3}{8}{1}: On {0}: –26
Silent mode...

Programming
24For assistance, please visit http://www.panasonic.com/help
For the Talking Caller ID feature
For the answering systemSet dial mode{1}{2}{0}{1}: Pulse {2}: r13
Set flash 
time
*9{1}{2}{1}{0}: 900 ms
{1}: 
{2}: 600 ms{3}: 400 ms
{4}: 300 ms{5}: 250 ms
{*}: 200 ms {#}: 160 ms
{6}: 110 ms{7}: 100 ms
{8}: 90 ms{9}: 80 msr16
Set line 
mode
*10{1}{2}{2}{1}: A {2}: r–
Privacy mode{1}{9}{4}{1}: On {0}: r17
Register 
handset{1}{3}{0}––28
Deregistration{1}{3}{1}––28
Display
(Change...

Programming
25For assistance, please visit http://www.panasonic.com/help
*1 If “System” column is checked, you do not need to program the same item using 
another handset.
*2 When the ringer volume is turned off, ~ is displayed and the handset does not ring 
for outside calls. However even when the ringer volume is set to off, the handset 
still rings for alarm (page 26), intercom calls, and paging (page 41).
*3 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone 
(tone 1...

Programming
26For assistance, please visit http://www.panasonic.com/help
Special programming
Silent mode
Silent mode allows you to select a period 
of time during which the handset will not 
ring for outside calls. This feature is 
useful for time periods when you do not 
want to be disturbed, for example, while 
sleeping. Silent mode can be set for 
each handset.
Important:
LSet the date and time beforehand 
(page 13).
LWe recommend turning the base unit 
ringer off (page 16) in addition to 
turning the...

Programming
27For assistance, please visit http://www.panasonic.com/help
LWhen the handset is in use, the alarm 
will not sound until the handset is in 
standby mode.
Changing the handset name
Each handset can be given a 
customized name (“Bob”, “Kitchen”, 
etc.). This is useful when you make 
intercom calls between handsets. You 
can also select whether or not the 
handset name is displayed in standby 
mode. The default setting is “Off”. If 
you select “On” without entering any 
handset name, “Handset...

Programming
28For assistance, please visit http://www.panasonic.com/help
Block calls without phone number
You can reject a call without phone 
number including “Out of area”, 
“Private caller”, or “Long 
distance”.
1{MENU} i {#}{2}{4}{0}
2{V}/{^}: Select the desired setting. 
i {SAVE} i {OFF}
Viewing/editing/erasing call block 
numbers
1{MENU} i {#}{2}{1}{7}
2{V}/{^}: Select the desired entry.
LTo exit, press {OFF}.
3To edit a number:
{EDIT} i Edit the phone number. 
i {SAVE} i {OFF}
To erase a number:...

Caller ID Service
29For assistance, please visit http://www.panasonic.com/help
Using Caller ID service
Important:
LThis unit is Caller ID compatible. To 
use Caller ID features, you must 
subscribe to a Caller ID service. 
Contact your service provider/
telephone company for details.
Caller ID features
When an outside call is being received, 
the caller’s name and phone number are 
displayed.
Caller information for the last 50 callers 
is logged in the caller list from the most 
recent call to the...

Caller ID Service
30For assistance, please visit http://www.panasonic.com/help
announced even if you subscribe to 
both Caller ID and Call Waiting with 
Caller ID services.
Phonebook name announcement
When caller information is received and 
it matches a phone number stored in the 
phonebook, the stored name in the 
phonebook is announced.
Group ringer tone for 
phonebook
This feature can help you identify who is 
calling by using different ringer tones for 
different groups of callers. When adding 
an...