Panasonic Kx Tg6841 Operating Instructions Manual

n
When 2 or more handsets are registered:
When the unit rings, use a handset which is
not supplying power to the base unit. For
the operation, please see “Answering calls”,
page 17.
R Do not use or lift the handset which is
placed on the base unit during power
back-up mode.
Note:
R During a call with the handset placed on the
base unit (power back-up mode), the call
may be disconnected if you touch the
handset. In such case, try to call back.
R The range of the base unit is limited during
a power...

Shared phonebook
T he shared phonebook allows you to make
calls without having to dial manually. The base
unit and any handset registered to the base
unit can use the shared phonebook. You can
add 100 names and phone numbers to the
shared phonebook, and assign each
phonebook entry to the desired group.
Important:
R Only 1 person can access the shared
phonebook at a time.
R Caller ID subscribers can use group ringer
tone features (page 37). Adding entries
Handset
1 MF N   
a  M M
ENU N
2 Mb N:  “Add new...

Changing group names
T
he default group name is  “Group 1 ” to
“ Group 9 ”. Handset
1 MF N   
a  M M
ENU N
2 Mb N:  “Group ” a  M SELECT N
3 Mb N: Select the desired group.  a
M SELECT N
4 Mb N:  “Group name ” a  M SELECT N
5 Edit the name (10 characters max.;
page 22).  a M SAVE N
6 MOFF N Finding and calling from a
p

honebook entry Scrolling through all entries
Handset / Base unit
1 P

roceed with the operation for your unit.
Handset:  MFN  Base unit:
 M N
2 Mb N:

 Select the desired entry.
3 Proceed...

4
MOFF NBase unit
1 F

ind the desired entry (page 23).
2 MERASE N a  M b N:  “Yes ” a  M SELECT N
3 MEXIT N Erasing all entries
Handset
1 MF N   
a  M M
ENU N
2 Mb N:  “Erase all ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N
4 Mb N:  “Yes ” a  M SELECT N
5 MOFF N Base unit
1 M N
 a  M E
RASE N
2 Mb N:  “Yes ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT NChain dial
T
 his feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a...

Speed dial
Y ou can assign 1 phone number to each of
the dial keys ( 1 to  9) on the handset. Adding phone numbers to speed
d

ial keys
n By entering phone numbers:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:  “Manual ” a  M SELECT N
3 Enter the party’s name (16 characters
max.).  a M OK N
4 Enter the party’s phone number (24
digits max.).  a M OK N
5 MSELECT N a  M OFF N
n From the shared phonebook:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:...

Programmable settings
Y
ou can customize the unit by programming the following features.
To access the features, there are 2 methods. Handset / Base unit
n S

crolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
R This step may vary depending on the feature being programmed.
R To exit the...

Sub-menu 1 Sub-menu 2 Settings Code
Play all msg.
––#32442
Erase all msg. * 1
– –#32542
Greeting Record greeting*
 1
–#30241
Check greeting –#30341
Pre-recorded *
 1
(Reset to pre-recorded
greeting) –
#30441
New message
a
 lert *1 Outgoing call
–
O
n/Off 1:
 On  0:   #338 43
Outgoing call
– N

otification to –
Outgoing call
– R

emote code 1:
 Activate
0:  
Base unit beep 1: O
n  0:   #339 43
Settings Ring count*
 1
2–7: 2-7 rings

0:  Toll saver #211
45
Recording time *
 1
1: 1 min
3:  
0:  Greeting...

Sub-menu 1 Sub-menu 2 Settings Code
Alarm
–1: Once
2:  Daily
0:   #720
32
Time a
djustment *1, *3
–1: < Caller ID auto >
0:  Manual #226
–Main menu:   “
I
nitial setting ”Sub-menu 1 Sub-menu 2 Settings Code
Ringer setting
Ringer volume 0–6: O
ff –6  #16017
Ringer tone *
 4, *5, *6
 #161–
Silent mode
– O

n/Off 1:
 On  0:   #23832
Silent mode
– S

tart/End <
11:00 PM/06:00 AM >#237 33
Set d
ate & time Date and time* 1
–#10114
Alarm 1: O
nce
2:  Daily
0:   #720
32
Time a
djustment *1, *3
1: < Caller ID...

Sub-menu 1 Sub-menu 2 Settings Code
Call block
* 1
– –#21733
First ring *
 1
1:  0:  Off #17334
Block w/o num *
 1, *2
(Block calls without
phone number) 1: 
 On  0:   #24034
Speed dial ––#26125
Voice mail Store VM access#*
 1
( VM : Voice mail) –
#33147
VM tone detect *
 1
1:  0:  Off #33247
LCD contrast
(
 Display contrast) –
1–6: Level 1–6  #145–
Key tone *
 7
–1:  0:  Off #165–
Caller ID edit
(
 Caller ID number
auto edit) –
1:  0:  Off #21438
Auto talk *
 8
–1:  On  0:   #20017
Set tel line Set dial...

Main menu:   “
Customer support ”Operation Code
Displaying customer support Web address.
#680–Main menu:   “
K
ey detector ”*11 Sub-menu 1 Sub-menu 2 Settings Code
Search
––#655 –
Battery check ––n
 
Base unit
Main menu:    “
P
honebook ”Operation Code
Viewing the phonebook entry.
#28023Main menu:   “
C
aller list ”Operation Code
Viewing the caller list.
#21337Main menu:   “
A
nswer device ”Sub-menu 1 Sub-menu 2 Settings Code
Screen call
– Off #31040Main menu:   “
I
nitial setting ”Sub-menu 1 Sub-menu 2...