Panasonic Kx Tg6582 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Kx Tg6582 Operating Instructions Manual. The Panasonic manuals for Cell Phone are available online for free. You can easily download all the documents as PDF.
Page 31
Shared Phonebook
31For assistance, please visit http://www.panasonic.com/help
Erasing entries
Erasing an entry
1Find the desired entry (page 30).
2{ERASE }
3{V}/{^}: “Yes ” i { SELECT } i
{ OFF }
Erasing all entries in a group
1{C } i { MENU }
2{V}/{^}: “Erase all” i
{ SELECT }
3{V}/{^}: Select the desired group.
i { SELECT }
4{V}/{^}: “Yes” i { SELECT }
5{V}/{^}: “Yes” i { SELECT }
6{OFF }
Chain dial
This feature allows you to dial phone
numbers in the phonebook while you are
on a call....
Page 32
Programming
32For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 32)
– using the direct commands (page 35)
L Direct command is the main method us ed in these operating instructions.
Programming by scrolling through the display menus
1
{MENU }
2Press {V} or {^} to select the desired main menu. i { SELECT...
Page 33
Programming 33For assistance, please visit http://www.panasonic.com/help Intercom 4––59 Bluetooth Link to cell 1: Add new device *2 (for CELL 1) 15 – Connect*1/Disconnect*117 – Ringer volume (Handset/Base unit *1) – – Ringer tone (Handset) – – Select unit to ring *116 – Ring as cell (limited)*116 – Registration 15 2: Add new device *2 (for CELL 2) 15 – Connect*1/Disconnect*117 – Ringer volume (Handset/Base unit *1) – – Ringer tone (Handset) – – Select unit to ring *116 – Ring as cell (limited)*116 –...
Page 34
Programming 34For assistance, please visit http://www.panasonic.com/help *1 If you program these settings using one of the handsets, you do not need to program the same item using another handset. *2 After the Bluetooth device is registered, “Add new device ” changes to the device name. Initial setting c Ringer setting Ringer volume *3 – Handset – Base unit*1 – Ringer tone *3– Interrupt tone – Handset – Base unit *1 – Silent mode – On/Off – Start/End 40 Set date & time Date and time *114 Alarm 40 Time...
Page 35
Programming
35For assistance, please visit http://www.panasonic.com/help
*3 When the cellular line only mode is turned on, these menus are not displayed
(page 17).
Programming using the direct commands
1
{ MENU } i { # }
2Enter the desired code.
3Select the desired setting. i { SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF }.
Note:
L In the following table, < > indicates the default settings.
FeatureCodeSettingSystem*1Page
Caller list {2 }{1...
Page 36
Programming
36For assistance, please visit http://www.panasonic.com/help
For Bluetooth: Link to cellAuto talk
*4{
2 }{0 }{0}{ 1}: On { 0 }: < Off>–21
Privacy mode {1 }{9 }{4}{ 1}: On { 0 }: < Off> r23
Register
handset {
1 }{3 }{0} ––4 2
Deregistration {1 }{3 }{1} ––4 2
Display
(Change language) {
1 }{1 }{0}{ 1}: < English >
{ 2 }: Español –14
Customer
support
*5{ 6 }{8 }{0} –––
FeatureCodeSettingSystem*1Page
Connect/
Disconnect
(CELL 1) {
6 }{2 }{5}{1} –r17
Connect/
Disconnect
(CELL 2) {
6...
Page 37
Programming
37For assistance, please visit http://www.panasonic.com/help
For landlineRegistration
(CELL 1)
{
6 }{2 }{4}{1} ––1 5
Registration
(CELL 2) {
6 }{2 }{4}{2}
Auto connect {6 }{3 }{2}{ 1}: < 1 min>
{ 2 }: 3 min
{ 3 }: 5 min
{ 4 }: 10 min
{ 0 }: Off r
17
Cell area code {6 }{3 }{3} –r18
Cell line only
mode {
1 }{5 }{7}{ 1}: On
{ 0 }: < Off> r
17
Cell line
select Handset:
{
6 }{3 }{4} {
1 }:
Cellphone 1
*10
{2 }:
Cellphone 2*10
{0 }:< Manual> –18
Base unit:
{*}{6 }{3}{4} {
1 }:
Cellphone...
Page 38
Programming
38For assistance, please visit http://www.panasonic.com/help
For Bluetooth: Using Bluetooth devices
For the answering systemSet dial mode
{1 }{2 }{0}{ 1}: Pulse {2 }: < Tone> r14
Set flash
time
*13{ 1 }{2 }{1}{ 0}: 900 ms
{ 1 }: < 700 ms >
{ 2 }: 600 ms {3 }: 400 ms
{ 4 }: 300 ms {5 }: 250 ms
{*} : 200 ms {# }: 160 ms
{ 6 }: 110 ms {7 }: 100 ms
{ 8 }: 90 ms {9 }: 80 ms r
22
Set line
mode
*14{ 1 }{2 }{2}{ 1}: A { 2 }: < B> r–
FeatureCodeSettingSystem*1Page
Phonebook transfer...
Page 39
Programming 39For assistance, please visit http://www.panasonic.com/help *1 If “System” column is checked, you do not need to program the same item using another handset. *2 This tone lets you know when you receive an outside call while you are on another line or an intercom call. If you select “On”, the tone sounds 2 times. *3 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones. *4 If you subscribe to a...
Page 40
Programming
40For assistance, please visit http://www.panasonic.com/help
Special programming
Alarm
An alarm sounds at the set time for 3
minutes once or daily. Alarm can be set
for each handset.
Important:
LSet the date and time beforehand
(page 14).
1{MENU } i { # }{7 }{2}{0}
2{V} /{^} : Select the desired alarm
option. i { SELECT }
3Enter the desired month and date.
i { OK }
4Set the desired time.
5{AM/PM }: Select “AM” or “PM”. i
{ OK }
6{V}/{^} : Select the desired alarm
tone. i { SELECT...