Panasonic Kx Tg6021 Operating Instructions Manual

Caller ID Service
For assistance, please visit http://www.panasonic.com/help21
Using Caller ID service
This unit is Caller ID compatible. To use 
Caller ID features, you must subscribe 
to Caller ID service of your telephone 
service provider.
Caller ID features
When an outside call is being received, 
the calling party’s name and phone 
number are displayed.
Caller information for the last 50 callers 
is logged in the caller list by the most 
recent call to the oldest.
LGenerally caller information is...

Caller ID Service
22For assistance, please visit http://www.panasonic.com/help
turn on the answering system and set 
the ring count to “2” (page 34), the 
unit does not announce the caller’s 
name. If “Toll saver” is selected 
and there is a new message, the unit 
does not announce the caller’s name.
LWhen you receive a call while on the 
phone, the 2nd caller’s name is not 
announced even if you subscribe to 
both Caller ID and Call Waiting with 
Caller ID services.
LThe announcement is heard at the...

Caller ID Service
For assistance, please visit http://www.panasonic.com/help23
31 – Area code – Local phone 
number 
Example:
4{C}
Caller ID number auto edit 
feature
Once you call back an edited number, 
the unit will remember the Area Code 
and Format of the Edited Number. Next 
time when someone calls from the 
same Area Code, caller information will 
be customized by the unit as follows:
– When the call is being received, the 
Caller ID number will be displayed in 
the same Format as the Edited...

Programming
24For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset. 
To access the features, there are 2 methods:
– scrolling through the display menus (page 24) 
– using the direct commands (page 26)
LMainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2Press {V} or {^} to select the desired menu. i {Select}
LIf...

Programming
For assistance, please visit http://www.panasonic.com/help25
*1 If you program these settings using one of the handsets, you do not need to 
program the same item using another handset. Customer support––29
Initial setting Set answering
(KX-TG6051/
KX-TG6052/
KX-TG6053/
KX-TG6054)Ring count
*134
Recording time
*135
Remote code
*134
Voice Mail Store VM access#
*136
VM tone detect
*136
Message alert– 35, 37
LCD contrast––
Key tone––
Auto talk–16
Caller ID edit–23
Set tel line Set dial mode...

Programming
26For assistance, please visit http://www.panasonic.com/help
Programming using the direct commands
1
{MENU}
2Enter the desired feature code.
3Enter the desired setting code. i {Save}
LThis step may vary depending on the feature being programmed.
4{OFF}
Note:
LIn the following table, < > indicates the default setting.
LIf you make a mistake or enter the wrong code, press {OFF}, then start again from 
step 1.
FeatureFeature 
codeSetting codeSystem 
setting*1Page
Alarm{8}{1}: Once {0}: –28
Auto...

Programming
For assistance, please visit http://www.panasonic.com/help27
KX-TG6021/KX-TG6022/KX-TG6023 only
KX-TG6051/KX-TG6052/KX-TG6053/KX-TG6054 onlyRinger volume 
(Handset){1}{1}{1}: Low {2}: Medium
{3}:  {0}: Off––
Set dial mode{0}{5}{1}{1}: Pulse {2}: r14
Set flash 
time
*5{0}{5}{2}{1}:  {2}: 600ms
{3}: 400ms {4}: 300ms
{5}: 250ms {6}: 110ms
{7}: 100ms {8}: 90msr16
Set line mode
*6{0}{5}{3}{1}: A {2}: r–
Store VM 
access#{0}{7}{1}–r36
Time 
adjustment
*7
(Caller ID 
subscribers only){4}{2}{1}:...

Programming
28For assistance, please visit http://www.panasonic.com/help
*1 If “System setting” column is checked, you do not need to program the same item 
using another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after 
lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or 
pressing any keys, including confirmation tones and error tones.
*4 If you subscribe to...

Programming
For assistance, please visit http://www.panasonic.com/help29
Note:
LTo stop the alarm, press any dial key or place the handset on the base unit or 
charger.
LWhen the handset is in use, the alarm will not sound until the handset is in standby 
mode.
Customer support
The handset can display the Internet address where you can download the operating 
instructions or get further information for this product using your computer.
{MENU} i {V}/{^}: “Customer support” i {Select} i {OFF}...

Answering System
30For assistance, please visit http://www.panasonic.com/help
Answering system
This unit contains an answering system 
which can answer and record calls for 
you when you are unavailable to 
answer the phone.
Important:
LOnly 1 person can access the 
answering system at a time.
LWhen callers leave messages, the 
unit records the day and time of each 
message. Make sure the date and 
time have been correctly set (page 
14).
Memory capacity
The total recording capacity (including 
your...