Panasonic KX-TG585SK Operating Instructions

2Mb N: Select the desired group.  a
M SELECT N
R “
” is displayed next to the selected
group numbers.
R To cancel the selected group:
Mb N: Select the group.  a Press
M SELECT N again. “
” disappears.
3 MSAVE N
4 Proceed with the operation for your unit.
Handset:  M OFF N
Base unit:  M EXIT N
Baby monitor
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or place. The monitored handset
(placed in a baby’s...

Note:
RIf you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1 MMENU N#268
2 Mb N:  “On ” a  M SELECT N
3 Mb N: Select  “Outgoing call ” to
monitor from an outside line.  a
M EDIT N a  M ADD N
4 Mb N:  “Manual ” a  M SELECT N
5 Enter the desired name.  a M OK N
6 Enter the desired number.  a M OK N
a  M SELECT N
R “Baby monitor ” will be displayed.
Note:
R The registered name/number is displayed.
Turning off the...

– To answer the call with the base unit,press  MZ N 3 times. *1
*1 If  MMUTE N is pressed, press  MZ N 2
times.
n When monitoring from an outside line:
Answer the call.
If you want to respond from your monitoring
phone, press  #1 using tone dialing.
You can turn off the baby monitor feature
by pressing  #0.
Note:
R The unit disconnects the call
automatically after 2 minutes.
Other programming
Changing the handset name
The default handset name is  “Handset 1 ” to
“ Handset 6 ”. You can customize the...

Using Caller ID serviceImportant:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your phone
service provider for details.
Caller ID features
Handset / Base unit
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
–“Out of...

Handset
1 MC N CID
2 Press  MC N to search from the most recent
call, or  MD N to search from the oldest call.
3 To call back, press  MSELECT N.
To exit, press  MOFF N.
4 MCELL N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
5 Mb N: Select the desired cellular phone.  a
M SELECT N
Base unit
1 MCID N
2 Press  MC N to search from the most recent
call, or  MD N to search from the oldest call.
3 To call back, press  MCELL 1 N or...

area code and format of the edited number.
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the CallerID number is displayed in the same format
as the edited number.
– After the call has ended, the caller’s phone number is displayed in the same format as
the edited number, when reviewed from the
caller list.
For example, you can use this feature to set
the unit to ignore the area code of callers in
your area,...

Copying phonebook from acellular phone (phonebook
transfer)
You can copy phonebook entries from the
paired cellular phones or other cellular phones
(not paired) to the unit’s phonebook. A cellular
phone must be compatible with Bluetooth
wireless technology.
Important:
R Your cellular phone must support Phone
Book Access Profile (PBAP) or Object
Push Profile (OPP) specification.
R If a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name.
R...

–“Trunk prefix ”: A trunk prefix; the initial
digit(s) to be dialed in a domestic call, prior
to the area code.
Handset
1 MMENU N
2 To store  “International code ”:
#117
To store  “Country code ”:  #118
To store  “Trunk prefix ”:  #119
3 Enter the desired number.  a M SAVE N
4 MOFF N
Note:
R After you copy the entries, confirm that the
numbers were transferred correctly.
Link to Cell app
For Android™ users
The free Link to Cell app helps you integrate
your Android phone with your DECT phone for...

–Android phone:  Bluetooth must be
turned on.
– Android phone:  [Application Alerts
manager] *1
 must be turned on.
– Handset or base unit:  “ Alert On/
Off ” must be turned on (page 59).
R If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.
*1 Turning on  [Application Alerts
manager]
Use the following procedure after
installing the Link to Cell app.
Android 2.x: Open your device’s
[Settings]  app. a Tap  [Accessibility] .
a...

–“Off ”: Voice announcement is not
available as alert.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1 For CELL 1:  MMENU N#6031
For CELL 2:  MMENU N#6032
2 Mb N: Select the desired setting.  a
M SAVE N
3 Proceed with the operation for your unit.
Handset:  M OFF N
Base unit:  M EXIT N
Selecting the alert tone
Handset
1 For CELL 1:  MMENU N#6041
For CELL 2:  MMENU N#6042
2 Mb N: Select the desired setting.
3 MSAVE N a  M OFF N
Temporary alert off...