Panasonic KX-TG585SK Operating Instructions

IntercomIntercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds
(page 44, 48).
–Handset:  To finish intercom, press
M OFF N. To answer the call, press  M
N.
– Base unit:  To finish intercom, press
M Z N. To answer the call, press  MZ N
again.
Making an intercom call
Handset
1 MMENU N a  M b N:  “Intercom ” a
M SELECT N
2...

Using the MCALL BLOCK N
button
You can press the  MCALL BLOCK N button in
the following situations to disconnect the
current call and add a phone number to the
call block list:
– when an incoming call is being received
– when an incoming call is being recorded by the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
Handset
1 Press  MCALL BLOCK N under the
situations shown above.
2...

6MSAVE N a  M OFF N
n When a cellular phone is not paired:
1 MC N CID
2 Mb N: Select the desired entry to be
blocked.
R To edit the number:  MMENU N a
M b N:  “Edit ” a  M SELECT N
Press  MEDIT N repeatedly until the
phone number is shown in the
10-digit format.  a M SAVE N a
“ Call block ” a  M SELECT N a
Go to step 4.
3 MCALL BLOCK N
4 Mb N:  “Yes ” a  M SELECT N
5 Edit the phone number if necessary
(24 digits max.).
6 MSAVE N a  M OFF N
Base unit
1 MCID N
2 Mb N: Select the entry to be blocked.
R To...

2Mb N: Select the desired setting.  a
M SAVE N a  M EXIT N
Setting not to ring once for
blocked call
If you do not want the unit to sound one ring
for calls from phone numbers stored in the call
block list, select  “No ”. The default setting is
“ Yes ”.
Handset
1 MCALL BLOCK N
2 Mb N:  “One ring for blocked call ”
a  M SELECT N
3 Mb N: Select the desired setting.  a
M SAVE N a  M OFF N
Base unit
1 MMENU N#173
2 Mb N: Select the desired setting.  a
M SAVE N a  M EXIT N
Viewing/editing/erasing call
block...

PhonebookYou can add 3,000 names (16 characters
max.) and phone numbers (24 digits max.) to
the phonebook, and assign each phonebook
entry to the desired group (page 36). The
following groups are available:
– Group 1:  “Home ”*1
 (default)
– Group 2:  “Cell 1 ”*1
– Group 3:  “Cell 2 ”*1
– Group 4-9: You can change the group name for each group.
*1 For groups 1-3, the group names cannot be changed.
Important:
R All entries can be shared by the base unit
and any registered handset.
R You can copy...

4To store the name, continue from step
3, “Editing entries”, page 37.
n When a cellular phone is not paired:
1 ME N REDIAL
2 Mb N: Select the desired phone number.
a  M SAVE N
3 To store the name, continue from step
3, “Editing entries”, page 37.
Base unit
1 MREDIAL N
2 Mb N: Select the desired phone number.
a  M SAVE N a  M EXIT N
Note for base unit:
R If you stored redial list number to the
phonebook using the base unit, the entry is
automatically assigned to  “Home ”.
R If you want to edit the caller...

4To change group names
Mb N:  “Group name ” a  M SELECT N a
Edit the name (10 characters max.).  a
M SAVE N
5 To set group ringer tone
Mb N: Select the current setting of the
group ringer tone.  a M SELECT N a  M b N:
Select  the  desired  ringer  tone.  a  M SAVE N
6 MOFF N
Finding and calling from a
phonebook entry
Once you have found the desired entry using
one of the following 4 methods, make a call
with your unit.
n Using a cellular line:
Handset
1 MCELL N
R The unit starts dialing when:
– only 1...

2MMENU N a  M b N:  “Edit ” a  M SELECT N
3 Edit the name if necessary.  a M OK N
4 Edit the phone number if necessary.  a
M OK N
5 Mb N: Select the desired group (page 36).
a  M SELECT N 2 times  a M OFF N
Erasing entries
Erasing an entry
Handset
1 Find the desired entry (page 37).
2 MMENU N a  M b N:  “Erase ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
Base unit
1 Find the desired entry (page 37).
2 MERASE N a  M b N:  “Yes ” a  M SELECT N
a  M EXIT N
Erasing all entries
Handset
1 MF N W...

nFrom the phonebook:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:  “Phonebook ” a  M SELECT N
3 Mb N: Select the desired entry.
4 MSAVE N a  M OFF N
Note:
R If you edit a phonebook entry which is
assigned to a speed dial key, the edited
entry does not transfer to the speed dial
key.
Editing an entry
Handset
1 Press and hold the desired speed dial key
(1  to  9). a  M MENU N
2 Mb N:  “Edit ” a  M SELECT N
3 Edit the name if necessary.  a M OK N
4 Edit the phone number if...

Menu list
To access the features, there are 2 methods.
Handset / Base unit
n Scrolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
n Using the direct command code
1 MMENU N a  Enter the desired code.
Example:  Press MMENU N#101 .
For available code:
– Handset: see page page 40.
– Base unit:...