Panasonic Kx Tg5771 Operating Instructions Manual

Programming
For assistance, please visit http://www.panasonic.com/help41
Programmable settings
You can customize the unit by programming the following features using the handset. To 
access the features, there are 2 methods: 
– scrolling through the display menus (page 41) 
– using the direct commands (page 46)
LMainly the direct command method is used in these operating instructions.
LTo change the base unit ringer volume and tone, see page 28.
Programming by scrolling through the display menus
1{MENU}...

Programming
42For assistance, please visit http://www.panasonic.com/help
Monochrome display models: KX-TG5771/KX-TGA570
LWhen you find “*1” in the following table, refer to the note below. 
*1 If you program these settings using one of the handsets, you do not need to program 
the same item using another handset.
Main menuSub-menu 1Sub-menu 2Page
Answering device To play new––
To play all––
To erase all––
Settings Message alert61
Ring count
*159
Recording time
*160
Remote code
*159
Call screening
*161...

Programming
For assistance, please visit http://www.panasonic.com/help43
Initial setting Auto Intercom–64
Talking CallerID–37
Caller ID edit––
LCD contrast––
Key tone––
Auto talk–27
Set base unit Talking CallerID
*137
VM tone detect
*162
Set tel line Set dial mode
*125
Set flash time
*1–
Set line mode
*1–
Registration HS registration67
Deregistration67
Set date & time Date and time
*125
Time adjustment
*1–
Change language–25
Handset name–51
Customer support––46
Main menuSub-menu 1Sub-menu 2Page...

Programming
44For assistance, please visit http://www.panasonic.com/help
Color display models: KX-TG5776/KX-TG5777/KX-TG5779/KX-TGA571
LWhen you find “*1” in the following table, refer to the note below. 
*1 If you program these settings using one of the handsets, you do not need to program 
the same item using another handset.
Main menuSub-menu 1Sub-menu 2Page
Answering device To play new––
To play all––
To erase all––
Settings Message alert61
Ring count
*159
Recording time
*160
Remote code
*159
Call...

Programming
For assistance, please visit http://www.panasonic.com/help45
Initial setting Auto Intercom–64
Talking CallerID–37
Caller ID edit––
Key tone––
Auto talk–27
Set base unit Talking CallerID
*137
VM tone detect
*162
Set tel line Set dial mode
*125
Set flash time
*1–
Set line mode
*1–
Registration HS registration67
Deregistration67
Set date & time Date and time
*125
Time adjustment
*1–
Change language–25
Handset name–51
Customer support––46
Main menuSub-menu 1Sub-menu 2Page
TG5771_5776_5777.book...

Programming
46For assistance, please visit http://www.panasonic.com/help
Programming using the direct commands
1{MENU} (middle soft key) i {#}
2Enter the desired feature code.
3Enter the desired setting code.
LThis step may vary depending on the feature being programmed.
4{SAVE} i {OFF}
Note:
LIn the following table, < > indicates the default setting.
LIf you make a mistake or enter the wrong code, press {OFF}, then start again from step 
1.
FeatureFeature 
codeSetting codeSystem 
setting*1Page
Auto...

Programming
For assistance, please visit http://www.panasonic.com/help47
Key tone*4{1}{6}{5}{1}:  {0}: Off––
LCD contrast 
(Display contrast){1}{4}{5}{1}–{6}: Level 1–6  – –
Message alert{3}{4}{0}{1}: On {0}: –61
Recording time{3}{0}{5}{1}: 1 min {2}: 2 min
{3}: 
{0}: Greeting onlyr60
Remote code{3}{0}{6}Default: 111r59
Ring count{2}{1}{1}{2}–{7}: Rings 
{0}: Toll saverr59
Ring color 
(Ringer indicator color){2}{3}{5}{1}: 
{2}: Color2 {3}: Color3
{4}: Multicolor––
Ringer tone 
(Handset){1}{6}{1}––49...

Programming
48For assistance, please visit http://www.panasonic.com/help
*1 If “System setting” column is checked, you do not need to program the same item using 
another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after lifting 
up the handset to answer a call, turn off this feature.
*3 The handset can display the Internet address where you can download operating 
instructions or get further information for this product using your computer.
*4 Turn this...

Programming
For assistance, please visit http://www.panasonic.com/help49
Customizing handset 
ringer tone and display
Handset ringer tone (for outside 
calls)
You can change the ringer tone heard 
when an outside call is received. 
LYou can record melodies for the handset 
ringer tone from an audio device (page 
49).
LColor display models only (KX-TG5776/
KX-TG5777/KX-TG5779/KX-TGA571):
You can copy melodies (in WAV file 
format using a computer) to be used for 
the handset ringer tone. Refer to the...

Programming
50For assistance, please visit http://www.panasonic.com/help
1Connect the handset to the audio 
device (such as a CD player or 
computer) using the included audio 
cable.
 
LHandset shown is KX-TGA570.
2{MENU} (middle soft key) i 
{#}{1}{6}{6}
3“Record” i {SELECT}
4Start playing the audio device.
5Press {REC.} to start recording.
6To stop recording, press {STOP}.
LTo listen to the recording, select 
“Playback”, then press {SELECT}. 
LTo re-record, select “Retry”, press 
{SELECT}, then start...