Panasonic Kx Tg2553 Operating Instructions Manual

41
Advanced Operation1
Press (FUNCTION/EXIT/CH).
2
Press Öor Ñrepeatedly until the arrow
points to “Program”.
3
Press FWD/EDITá(Yeskey).
4
Press Öor Ñrepeatedly until the arrow
points to “Voicemail tone”.
5
Press FWD/EDITá(Yeskey).
6
Press Öor Ñto select “Off” or “On”.
Press 
FWD/EDITá(Savekey).
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•
You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
HProgram
GF H=Yes
Save mailbox#
HVoicemail tone
GF H=Yes...

42
Voice Mail Service
•If “Voicemail” and “”still remain on the display and the VOICE MAIL
indicator on the base unit still flashes even if you have listened to your voice mail
message(s), press (FUNCTION/EXIT/CH), and press and hold (CLEAR)until the
unit beeps. “Voicemail” and 
“”will disappear and the indicator will go off.
•If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, “Voicemail” and 
“”may not be displayed and the
VOICE MAIL indicator may not...

Special Features
43
Advanced Operation
Automatic Security Code Setting
Each time you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help
prevent the unauthorized use of your telephone line by another cordless
telephone user.
Handset Locator
You can locate the handset or page the handset user with beep tones
from the base unit.
1
Press (HANDSET!LOCATOR).
•The IN USE/CHARGE indicator flashes. The handset beeps for 1 minute
and...

44
Special Features
For Call Waiting Service Users
Press (FLASH/CALL!WAIT/VOICE!MAIL)if you hear a call-waiting tone
while talking.
•The first call is put on hold and you can answer the second call.
•To return to the first caller, press (FLASH/CALL!WAIT/VOICE!MAIL)again.
•The call waiting service cannot be used when a parallel connected telephone is
in use.
•If this function does not operate properly, consult your telephone company for
details.
Call Waiting Caller ID Feature
Call Waiting Caller ID Feature...

45
Advanced Operation
FLASH Button
Pressing (FLASH/CALL!WAIT/VOICE!MAIL)allows you to use special
features of your host PBX such as transferring an extension call or
accessing special telephone services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. 
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. Your phone comes from the factory set to
“700 ms”. 
Make sure the handset is in the...

46
Wall Mounting
To Power
Outlet
This unit can be mounted on a wall phone plate.
2
Connect the AC adaptor.
3
#Tuck the telephone line
cord inside the wall
mounting adaptor.
$Connect the telephone
line cord to the unit.
%Install the adaptor by
pushing it in the direction
of the arrow.
•The word “UP” should face
upward.
1
Adjust the angle of the cradle:
#Slide the lock switch
to “RELEASE”.
$Rotate the cradle 90°
until it faces straight
up.
%Slide the lock switch
to “LOCK” with the
cradle facing straight...

47
Useful Information
4
Connect the telephone line
cord. Mount the unit, then
slide down.
•Raise the antennas.
5
To charge the handset battery:
Place the handset in the cradle as
shown.
•The IN USE/CHARGE indicator lights.
IN USE/CHARGE
Indicator 

48
Using an Optional Headset
Plugging an optional headset into the handset allows a hands-free phone
conversation. Please use only the Panasonic KX-TCA88 headset. To order
call the accessories telephone number on page 2.
Connecting an optional headset to the handset
Open the headset jack cover, and connect the headset to the headset
jack as shown below.
Headset Jack
H
When the optional headset is connected to the handset, make sure to use the
headset to talk with the caller. If you want to have a normal...

49
Useful Information
Battery Replacement
Attention:
The product you have purchased is powered by a nickel
cadmium battery which is recyclable. At the end of its
useful life, under various state and local laws, it is illegal
to dispose of this battery into your municipal waste
stream. Please call 1-800-8-BATTERY for information on
how to recycle this battery. If “Recharge battery” is displayed and/or “” flashes after being
fully charged, replace the battery with a new Panasonic P-P510
(N4HKGMB00001)...

50
Adding Another Phone
This unit will not function during a power failure. To connect a standard
telephone on the same line, use the Panasonic T-adaptor KX-J66.
To order, call the accessories telephone number on page 2.
T-Adaptor (KX-J66) Single-Line 
Telephone Jack
Telephone 
Line Cord Standard Telephone