Panasonic Kx Tg2480 Operating Instructions Manual

Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport41
4Base unit:
Press and hold {HANDSET 
LOCATOR} until the LOCATOR 
indicator flashes.
LAfter the LOCATOR indicator starts 
flashing, the rest of the procedure 
must be completed within 1 minute.
5Handset:
Press {OK}, then wait until the handset 
beeps.
LRegistration is complete.
Customer support
The handset can display the Internet 
address where you can download 
operating instructions for this product 
using...

Programmable Settings
42For assistance, please visit http://www.panasonic.com/consumersupport
Programming via direct commands
You can also program most features using “direct commands”—special codes that take 
you directly to the feature you wish to program and allow you to select the desired setting. 
There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1Press {MENU}.
2Enter the desired feature code (shown below).
3Enter the desired...

Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport43
Note:
LIf you make a mistake or enter the wrong code, press {OFF} then start again by 
pressing {MENU}. Store VM 
access#Line 1{0} {7} {1} {1}Go to step 6 on page 33. page 33
Line 2{0} {7} {1} {2}
VM tone detect Line 1{0} {7} {2} {1}{1}: On {0}: Off page 33
Line 2{0} {7} {2} {2}
Change language{0} {8}{1}: English {2}: Spanish page 38
Handset registration{0} {0}Go to step 4 on page 41. page 40
Message alert{0}...

Useful Information
44For assistance, please visit http://www.panasonic.com/consumersupport
Wall mounting
The base unit can be mounted on a wall 
phone plate.
1Push the hook and turn it upward until it 
clicks into place.
2Press the tabs in the direction of the 
arrows (1), then remove the wall 
mounting adaptor (2).
3Connect the AC adaptor. Tuck the 
telephone line cord inside the wall 
mounting adaptor, then push the 
adaptor in the direction of the arrows 
(1 and 2).
LThe word “UP WALL” should face...

Useful Information
For assistance, please visit http://www.panasonic.com/consumersupport45
5To charge the handset battery:
Rest the handset on the charge contacts 
(1), then push the top of the handset so 
the hook snaps into the slot at the top of 
the handset (2).
LThe unit will beep once, the CHARGE 
indicator will light, and “Charging” will 
be displayed.
Headset (optional)
Connecting an optional headset to the 
handset allows hands-free phone 
conversations. Please use only a 
Panasonic headset. See...

Useful Information
46For assistance, please visit http://www.panasonic.com/consumersupport
Belt clip
You can hang the handset on your belt or 
pocket using the included belt clip.
To attach the belt clip
To remove the belt clip
Shoulder rest attachment
Use the shoulder rest attachment if you 
need to keep your hands free during a 
conversation.
To attach the shoulder rest attachment
Attach the included belt clip to the handset 
(see the left), then attach the shoulder rest 
attachment to the belt clip....

Useful Information
For assistance, please visit http://www.panasonic.com/consumersupport47
Error messages
If the unit detects a problem, one of the following messages will be displayed on the 
handset.
Display messageCause & solution
BusyLThe line is being used. You can select the other line by 
pressing {Line1} or {Line2} (page 30).
Error!!LWhen you tried to register the handset, the handset and 
the base unit could not link for some reason, such as 
interference from electrical appliances. Move the...

Useful Information
48For assistance, please visit http://www.panasonic.com/consumersupport
Troubleshooting
General use
Programmable settings
ProblemCause & solution
The unit does not work.LMake sure that the battery is installed correctly (page 
14).
LCheck the connections (page 9–11).
LFully charge the battery (page 14).
LClean the charge contacts and charge again (page 14).
LUnplug the base unit’s AC adaptor to reset the unit. 
Reconnect the adaptor and try again.
LRe-install the battery (page 14) and...

Useful Information
For assistance, please visit http://www.panasonic.com/consumersupport49
Making/answering calls, Paging
Phonebook
ProblemCause & solution
Static is heard, sound 
cuts in and out. 
Interference from other 
electrical units.LMove the handset and the base unit away from other 
electrical appliances.
LMove closer to the base unit.
LRaise the base unit antenna.
LTurn on the clarity booster feature (page 24).
LIf your unit is connected to a telephone line with DSL 
service, we recommend...

Useful Information
50For assistance, please visit http://www.panasonic.com/consumersupport
Caller ID
ProblemCause & solution
The handset does not 
display the caller’s name 
and/or phone number.LYou have not subscribed to Caller ID service. Contact 
your telephone company to subscribe.
LIf your unit is connected to any additional telephone 
equipment such as Caller ID box or wireless telephone 
jack, disconnect the unit from the equipment and plug 
the unit directly into the wall jack.
LIf your unit is...