Panasonic Kx Tg2239 Operating Instructions Manual

21
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)For assistance, please call: 1-800-211-PANA(7262)
1
Press .
2
Dial a phone number.
•The dialed number is displayed.
•After a few seconds, the display will show the
length of the call and the battery strength.
3
To hang up, press (OFF)or place the 
handset on the base unit.
•If the handset has lost communication with the base unit, 3 beeps sound and “No
link to base Place on cradle and try again.” is displayed.
TalkV.E.
1112222
TalkV.E....

22
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
•Talk alternately with the caller in a quiet room.
•If the other party has difficulty hearing you, press Öto decrease the speaker
volume.
•If the other party’s voice from the speaker cuts in/out during a conversation,
press Öto decrease the speaker volume.
•While talking using  , you can switch to the hands-free phone
conversation by pressing  . To switch back to the receiver, press  .
To have a hands-free phone...

23
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
To dial after confirming the entered number
1
Dial a phone number.
•If you misdial, press (HOLD/INTERCOM/CLEAR).
One digit is erased. Dial the correct phone
number.
•To cancel, press (OFF).
2
Press .
OR
To have a hands-free phone conversation,
press  , and when the other party
answers, talk into the microphone.
•After a few seconds, the display will show the
length of the call and the battery strength.
3
To hang up, press (OFF)or place...

24To adjust the receiver volume (HIGH, MEDIUM or LOW)
or speaker volume (6 levels) while talking
To increase, press Ñ.
To decrease, press 
Ö.
•The display will return to the length of the call.
While using 
•Each time you press Öor Ñ, the volume
level will change among 3 levels (HIGH,
MEDIUM or LOW). Your phone comes from
the factory set to level MEDIUM.
While using 
•Each time you press Öor Ñ, the volume
level will change among 6 levels. Your phone
comes from the factory set to level 3.
•When you...

25
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
Lighted handset keypad
The handset dialing buttons will light when you press a button or lift the
handset off the base unit. They flash when a call is received with the
handset off the base unit. 
The lights will go out a few seconds after pressing a button, lifting the
handset, answering a call, hanging up a call, leaving the programming
mode or ending the intercom.
Backlit LCD display
The lighted handset display will stay on for a few...

26
1
Press (SP-PHONE).
•The SP-PHONE indicator lights.
2
Dial a phone number.
3
When the other party answers, talk into the MIC (microphone).
4
To hang up, press (SP-PHONE).
•The indicator light goes out.
•To switch to the handset while using the base unit speakerphone:
— If the handset is off the base unit, press or  .
— If on the base unit, just lift up.
•During a call using the handset, the call can be switched to the base unit by
pressing (SP-PHONE)on the base unit.
Base Unit (Digital Duplex...

27
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
•Talk alternately with the caller in a quiet room.
•If the other party has difficulty hearing you, press VOLUMEto decrease
the speaker volume.
•If the other party’s voice from the speaker cuts in/out during a conversation,
press VOLUMEto decrease the speaker volume.
To adjust the speaker volume (8 levels) while talking
To increase, press VOLUME.
To...

28
Base Unit
1
Press (SP-PHONE).
•The SP-PHONE indicator lights.
2
Talk into the MIC.
3
To hang up, press (SP-PHONE).
•The indicator light goes out.
•You can select the ringer volume while a call is being received. Press
(MUTE/RINGER)while the base unit is just ringing. To set to OFF, press and
hold (MUTE/RINGER).
•When the handset and base unit ringer volumes are set to OFF, they will not ring
(p. 18).
When a call is received, the unit rings and “Incoming call” is
displayed and the IN USE indicator on...

29
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
Caller ID Service
This unit is compatible with a Caller ID service offered by your telephone
company. If you subscribe to a Caller ID service, the calling party’s
information will be shown on the handset after the first ring.
The unit can record information of up to 30 different callers, including the
time and date received and the number of times called, in the Caller List.
The Caller List information is sorted by the most recent to the...

30
1
Press Öor Ñto enter the
Caller List.
•The display will show, for example, 
the following.
•You can go to the directory list by
pressing á(p. 43).
2
To search from the most
recent call, press 
Ö.
To search from the oldest
call, press 
Ñ.
•To scroll between callers, 
press Öor Ñ.
3
To exit the list, press (OFF). 2 new calls
GF H=Directory
•Once new calls have been checked, “√” will be added.
•If “No items stored” is displayed in step 1, the Caller List is empty.
•If more than one call is received from...