Panasonic Kx Tg2238 Operating Instructions Manual

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
11 
Programmable Functions 
Useful information: 
• If  
Select 
 is pressed while “ 
---(Go back)--- 
” is displayed, the unit will go 
back to the previous menu mode. If you press the key in the main menu, the unit 
will exit programming mode.
• After programming is complete, the display will return to the main menu or the 
sub-menu depending on which menu the selected item is located. (See the menu 
table below.)
• You can exit...

 
Programmable Functions 
12 
Display Language  
You can select either ENGLISH or SPANISH as the display language. The factory 
preset is ENGLISH.  
Dialing Mode  
If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set 
dialing mode to “Pulse”. The factory preset is “Tone”. 
1 
Press  
[MENU] 
. 
2 
Scroll to “ 
Initial setting 
” by pressing  
[] 
 
or  
[] 
, then press  
Select 
. 
3 
Scroll to “ 
Change language 
” by pressing  
[] 
 
or  
[] 
, then press  
Select 
....

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
13 
Programmable Functions
Voice Enhancer Technology 
 
Voice Enhancer Technology ( ) helps clarify and improve sound reception 
creating a natural-sounding voice that is easy to hear and understand. 
This is accomplished by enhancing the frequency that is narrowed through the 
telephone line and comes pre-set to OFF at the factory.
Under normal conditions, cordless phones are limited to a narrowed frequency 
bandwidth (300Hz to 3.5KHz)....

 
Programmable Functions 
14 
Talking Caller ID   
After subscribing to a Caller ID service, the handset will display a caller’s name and 
phone number (p. 23). Name and telephone number Caller ID service is required. 
This Talking Caller ID feature allows the unit to announce a displayed caller’s name 
through the handset and base unit speakers while a call is being received (p. 23). 
For example, when you receive a call from “SMITH, JOHN”, the unit will display 
“ 
SMITH, 
  
JOHN 
” and announce “...

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
15 
Programmable Functions
LCD Contrast 
 
You can select the handset LCD contrast (5 levels). The factory preset is level 3.  
1 
Press  
[MENU] 
. 
2 
Scroll to “ 
Initial setting 
” by pressing  
[] 
 
or  
[] 
, then press  
Select 
. 
3 
Press  
Select 
 at “ 
LCD contrast 
”. 
4 
Select the desired contrast by pressing  
[] 
 or  
[] 
. 
• Each time you press  
[] 
 or  
[] 
, the LCD contrast 
will change. 
5 
Press  
Save 
, then...

 
Programmable Functions 
16 
Ringer Volume  
You can select the handset or base unit ringer volume HIGH, MEDIUM, LOW or 
OFF. The factory preset is HIGH. If set to OFF, the handset or base unit will not ring 
and a caller’s name will not be announced even if the Talking Caller ID feature is ON 
(p. 14).   
  
• If set to OFF, the handset displays “ 
Ringer off 
” while not in use. But if there are 
missed calls and the handset is off the base unit, the handset will not display 
“ 
Ringer off 
”.
• You...

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
17 
Programmable Functions
Ringer Tone 
 
You can select one of 6 ringer tones for external calls on the handset and the base 
unit. The factory preset is 1.  
Line Mode  
The line mode is preset at the factory to “B”. Generally leave the line mode “B”. If a 
change of the line mode setting is required by our customer call center or service 
person, change the line mode to “A”.  
1 
Press  
[MENU] 
. 
2 
Press  
Select 
 at “ 
Ringer...

 
18 
Making Calls 
Using the Handset 
  
To have a hands-free phone conversation  
• If the handset has lost communication with the base unit, the handset beeps 
3 times and “ 
No link to base. Place on cradle and try again. 
” is 
displayed.
• If  
[] 
,  
[] 
 or any other buttons except  
[MUTE] 
 and  
[OFF] 
 is pressed while the 
handset is on the base unit, the handset beeps 3 times and “ 
Please lift up 
and try again. 
” is displayed. Lift the handset and press the button again. 
1 
Press  
[]...

 
Making Calls 
Basic Operation
 
For assistance, please call: 1-800-211-PANA(7262) 
19  
To dial after confirming the 
entered number  
If noise interferes with the 
conversation 
Have the unit select a clearer 
channel by doing one of the 
following:
Press  
[]  
(Channel) if talking 
using  
[] 
,
press  
[] 
 (Channel) if talking 
using  
[] 
, or
press  
CH 
, which is displayed when 
you adjust receiver or speaker 
volume (p. 20).
OR
Walk closer to the base unit. 
To redial the last number 
dialed...

 
Making Calls 
20 
To adjust the receiver/speaker volume while talking 
3 levels (HIGH, MEDIUM and LOW) are available for the receiver and 6 levels for 
the speaker.  
To increase volume, press  
[] 
. 
To decrease volume, press  
[] 
. 
• The display shows the current volume setting.
• If you try to increase/decrease volume when it is at 
the maximum/minimum level, the handset will beep 
3 times. 
Backlit LCD display 
The lighted display of the handset will stay on for a few seconds after pressing a...