Panasonic Kx Tg2237 Operating Instructions Manual

							51For assistance, please call: 1-800-211-PANA(7262)
Special Features
(FLASH/CALL!WAIT/VOICE!MAIL)
(TONE)(OFF)
(REDIAL/PAUSE)
(FLASH/CALLÒWAIT) (TONE)
(REDIAL/PAUSE)
    ,     , 
(MUTE)
(MUTE/RINGER)(FUNCTION)
Automatic Security Code Setting
Each time you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help
prevent the unauthorized use of your telephone line by another cordless
telephone user.
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press (TONE)before entering access numbers which require tone dialing.
•The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the mode
will return to pulse.
Muting Your Conversation
Handset:
Press
(MUTE)while talking.
•The display on the right will be shown.
Base unit:
Press 
(MUTE/RINGER)while talking. 
•The SP-PHONE indicator flashes.
•The other party cannot hear your voice but you can hear theirs.
•To release the mute, press (MUTE)
, or on the handset or
(MUTE/RINGER)
or (SP-PHONE)on the base unit.
Talk

Ex. (MUTE)was pressed.
Advanced Operation 
						

							52
Special Features
For Call Waiting Service Users
Press (FLASH/CALL!WAIT/VOICE!MAIL)or (FLASH/CALL!WAIT)if you hear
a call-waiting tone while talking.
•The first call is put on hold and you can answer the second call.
•To return to the first caller, press (FLASH/CALL!WAIT/VOICE!MAIL)
or 
(FLASH/CALL!WAIT)again.
•The call waiting service cannot be used when a parallel connected telephone is
in use.
•If this function does not operate properly, consult your telephone company for
details.
Call Waiting Caller ID Feature
Call Waiting Caller ID Feature allows your
handset to display the second caller’s
information. After you hear a call-waiting tone
while talking, the handset will display the caller’s
name with the phone number and
“----Waiting----”.
•Please contact your telephone company for details and availability in your area.
•While talking with the base unit, the handset off the base unit will not display the
caller’s information.
How to Use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users)
We recommend you press (REDIAL/PAUSE)if a pause is required for
dialing with a PBX or to access a long distance service.
Ex. Line access number 
(9)(PBX)
(9)\(REDIAL/PAUSE)\
•Pressing (REDIAL/PAUSE)once creates a 3.5 second pause. This prevents
misdialing when you redial or dial a stored number.
•Pressing (REDIAL/PAUSE)more than once increases the length of the pause
between numbers.Phone number
BROWN,NANCY 
1-555-666-7777
----Waiting---- 
						

							53For assistance, please call: 1-800-211-PANA(7262)
FLASH Button
Pressing (FLASH/CALL!WAIT/VOICE!MAIL)or (FLASH/CALL!WAIT)allows
you to use special features of your host PBX such as transferring an
extension call or accessing special telephone services (optional) such as
call waiting. 
•Pressing (FLASH/CALL!WAIT/VOICE!MAIL)or (FLASH/CALL!WAIT)causes to
release following operations:
— temporary tone dialing, or
— muting your conversation.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. 
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. Your phone comes from the factory set to
“700 ms”. 
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (FUNCTION).
2
Scroll to “Program” by pressingÖor Ñ.
3
Press á.
4
Press áat “Set flash time”.
•The current setting is displayed. 
5
Select the desired time by pressingÖor Ñ.
6
Press á(Savekey) .
•A beep sounds. 
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF)
.
•If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
Flash time
:700ms
GF H=Save
--------------
HSet flash time
Save mailbox#
Flash time
:110ms
Ringer pattern
HProgram
--------------
Advanced Operation 
						

							54
Wall Mounting
This unit can be mounted on a wall phone plate.
2
Connect the AC adaptor.
3
Tuck the telephone line cord inside
the wall mounting adaptor, then
push it in the direction of the arrow.
•The word “UP” should face upward.
1
Push the hook and turn it around.
Turn the hook until a click is heard.
To Power
Outlet 
						

							55
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
4
Connect the telephone line cord.
Mount the unit, then slide down.
•Raise the antenna.
•Fasten the telephone line cord to
prevent it from being disconnected.
5
To charge the handset battery:
Fix the charge contacts (#) and insert
the hook to the handset hole ($).
•The IN USE/CHARGE indicator lights.
2
1
Hook
Hole
Hooks
OR 
						

							56
H
You can hang the handset on your belt or pocket using the belt clip.
To attach the belt clip To remove the belt clip
Headset JackThe illustration headset
is a KX-TCA88.
Connecting an optional headset to the handset
Open the headset jack cover, and connect an optional headset to the
headset jack as shown below.
Belt Clip
Plugging an optional headset into the handset allows a hands-free phone
conversation. Please use only a Panasonic KX-TCA88 or KX-TCA90
headset. To order, call the accessories telephone number on page 2.
Optional Headset
To switch to the speakerphone while using the headset:
Press  . To return to the headset, press  . 
						

							57
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Battery Replacement
A nickel cadmium battery that is recyclable powers the
product you have purchased. At the end of its useful life,
under various state and local laws, it is illegal to dispose of
this battery into your municipal waste stream. Please call 
1-800-8-BATTERY for information on how to recycle this
battery. If “Recharge” is displayed and/or “ ” flashes after being fully
charged, replace the battery with a new Panasonic P-P511
(PQPP511SVC) battery. To order, call the accessories telephone number
on page 2.
1
Press the notch on the
handset cover firmly and
slide it as indicated by the
arrow.
2
Remove the old battery.
Insert the new battery into 
the handset as shown (#), 
matching the correct polarity. 
Press the battery down 
until it places into the
compartment ($).
3
Close the cover. Make sure you charge the new battery for about
15 hours in order to display the battery strength prompt correctly
(p. 12).
2
1 
						

							58
Adding Another Phone
This unit will not function during a power failure. To connect a standard
telephone on the same line, use the Panasonic T-adaptor KX-J66.
To order, call the accessories telephone number on page 2.
Standard Telephone
Single-Line
Telephone Jack
T-Adaptor (KX-J66)Telephone
Line Cord 
						

							59
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Troubleshooting
Problem
The unit does not work.
“No link to base
Place on cradle and
try again.” is displayed
and an alarm tone sounds.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
The handset and/or the base
unit does not ring.
The handset display is blank.
Remedy
•Check the settings (p. 11–15).
•Charge the battery fully (p. 12).
•Clean the charge contacts and charge
again (p. 13).
•Install the battery properly (p. 12).
•Place the handset on the base unit and
unplug the AC adaptor to reset. Plug in,
and try again.
•Re-install the battery and place the
handset on the base unit (p. 57). Try
again.
•You are too far from the base unit. Move
closer and try again.
•Place the handset on the base unit and
try again.
•Plug in the AC adaptor.
•Raise the base unit antenna.
•Locate the handset and the base unit
away from other electrical appliances
(p. 3).
•Move closer to the base unit.
•Raise the base unit antenna.
•Press 
Üto select a clearer channel in
the talk, speakerphone or intercom
mode.
•The ringer volume is set to OFF. Set to
HIGH or LOW (p. 18).
•When the handset is on the base unit,
the handset does not ring. Only the base
unit rings in the selected pattern when
receiving a call. 
•Charge the battery fully (p. 12). 
						

							60
Troubleshooting
Problem
You cannot program items,
such as the dialing mode.
Previously programmed
information is erased.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the program/
search.
The unit does not display the
caller’s name and/or phone
number.
Remedy
•Programming is not possible while the
unit is in the talk or speakerphone mode,
when viewing the Caller List/directory list.
•Do not pause for over 60 seconds while
programming.
•Move closer to the base unit.
•
Ö, Ñ, Üor ámay have been
pressed when you picked up the
handset. Press 
(OFF)and try again.
•If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
•You cannot store an item in the directory
while the unit is in the talk, speaker or
intercom mode or while storing phone
numbers in the base unit.
•Do not pause for over 60 seconds while
storing.
•To answer the call, press, or
(SP-PHONE). Start again from the
beginning after hanging up.
•You need to subscribe to a Caller ID
service.
•Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
•Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
•Telephone line noise may be affecting
the Caller ID information.