Panasonic Kx Tg2237 Operating Instructions Manual

51For assistance, please call: 1-800-211-PANA(7262)
Special Features
(FLASH/CALL!WAIT/VOICE!MAIL)
(TONE)(OFF)
(REDIAL/PAUSE)
(FLASH/CALLÒWAIT) (TONE)
(REDIAL/PAUSE)
    ,     , 
(MUTE)
(MUTE/RINGER)(FUNCTION)
Automatic Security Code Setting
Each time you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help
prevent the unauthorized use of your telephone line by another cordless
telephone user.
Temporary Tone Dialing
(For Rotary or...

52
Special Features
For Call Waiting Service Users
Press (FLASH/CALL!WAIT/VOICE!MAIL)or (FLASH/CALL!WAIT)if you hear
a call-waiting tone while talking.
•The first call is put on hold and you can answer the second call.
•To return to the first caller, press (FLASH/CALL!WAIT/VOICE!MAIL)
or 
(FLASH/CALL!WAIT)again.
•The call waiting service cannot be used when a parallel connected telephone is
in use.
•If this function does not operate properly, consult your telephone company for
details.
Call Waiting Caller...

53For assistance, please call: 1-800-211-PANA(7262)
FLASH Button
Pressing (FLASH/CALL!WAIT/VOICE!MAIL)or (FLASH/CALL!WAIT)allows
you to use special features of your host PBX such as transferring an
extension call or accessing special telephone services (optional) such as
call waiting. 
•Pressing (FLASH/CALL!WAIT/VOICE!MAIL)or (FLASH/CALL!WAIT)causes to
release following operations:
— temporary tone dialing, or
— muting your conversation.
Selecting the flash time
The flash time depends on your telephone...

54
Wall Mounting
This unit can be mounted on a wall phone plate.
2
Connect the AC adaptor.
3
Tuck the telephone line cord inside
the wall mounting adaptor, then
push it in the direction of the arrow.
•The word “UP” should face upward.
1
Push the hook and turn it around.
Turn the hook until a click is heard.
To Power
Outlet 

55
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
4
Connect the telephone line cord.
Mount the unit, then slide down.
•Raise the antenna.
•Fasten the telephone line cord to
prevent it from being disconnected.
5
To charge the handset battery:
Fix the charge contacts (#) and insert
the hook to the handset hole ($).
•The IN USE/CHARGE indicator lights.
2
1
Hook
Hole
Hooks
OR 

56
H
You can hang the handset on your belt or pocket using the belt clip.
To attach the belt clip To remove the belt clip
Headset JackThe illustration headset
is a KX-TCA88.
Connecting an optional headset to the handset
Open the headset jack cover, and connect an optional headset to the
headset jack as shown below.
Belt Clip
Plugging an optional headset into the handset allows a hands-free phone
conversation. Please use only a Panasonic KX-TCA88 or KX-TCA90
headset. To order, call the accessories...

57
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Battery Replacement
A nickel cadmium battery that is recyclable powers the
product you have purchased. At the end of its useful life,
under various state and local laws, it is illegal to dispose of
this battery into your municipal waste stream. Please call 
1-800-8-BATTERY for information on how to recycle this
battery. If “Recharge” is displayed and/or “ ” flashes after being fully
charged, replace the battery with a new Panasonic...

58
Adding Another Phone
This unit will not function during a power failure. To connect a standard
telephone on the same line, use the Panasonic T-adaptor KX-J66.
To order, call the accessories telephone number on page 2.
Standard Telephone
Single-Line
Telephone Jack
T-Adaptor (KX-J66)Telephone
Line Cord 

59
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Troubleshooting
Problem
The unit does not work.
“No link to base
Place on cradle and
try again.” is displayed
and an alarm tone sounds.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
The handset and/or the base
unit does not ring.
The handset display is blank.
Remedy
•Check the settings (p. 11–15).
•Charge the battery fully (p. 12).
•Clean the charge contacts and charge
again (p. 13).
•Install the battery...

60
Troubleshooting
Problem
You cannot program items,
such as the dialing mode.
Previously programmed
information is erased.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the program/
search.
The unit does not display the
caller’s name and/or phone
number.
Remedy
•Programming is not possible while the
unit is in the talk or speakerphone mode,
when viewing the Caller List/directory list.
•Do not pause for over 60 seconds while...