Panasonic Kx Tg2130 Operating Instructions Manual

Preparation
For assistance, please visit http://www.panasonic.com/help11
Handset
ADisplay
B {PAUSE } { REDIAL }
C {C}  (TALK)  {FLASH }
D Headset jack
E {< } (Repeat)
F {5 } (Message / Stop)
G {> } (Skip)
H {*}  (TONE)
I {MUTE } { CLEAR }
J Antenna
K Receiver
L {EDIT }
M {V} {^}  CID (Caller ID) / 
VOL. (Volume)
N {OFF }
O {ERASE }
P {AUTO } { FUNCTION } Q
{CH } (Channel)  {ANSWER }
R Microphone
S Charge contacts
Base unit display items
*1 When the answering system is turned 
off, the display shows “ ”....

Programming
12For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by 
programming the following features.
Day and time
Set the correct day and time. When you 
play back a message from the answering
system (page 21), the unit announces the
day and time it was recorded.
1Press and hold {DAY/CHECK } until the 
current day is announced, then release 
{ DAY/CHECK }.
2Press and hold  {HOUR } until the 
current hour is announced, then release 
{ HOUR }....

Programming
For assistance, please visit http://www.panasonic.com/help13
2Select the desired ringer tone by using 
{V} or {^} .
3Press  {EDIT }, then press  {OFF }.
Handset ringer on/off
You can turn the ringer on/off. The default 
setting is “ ON”.
1Press  {FUNCTION } 5 times until 
“ RINGER “ is displayed.
2Select “ON” or “ OFF” by using  {V} or {^} .
3Press  {EDIT }, then press  {OFF }.
Note:
L When the ringer is set to off, the handset 
does not ring for outside calls.
Dialing mode
If you cannot make...

Making/Answering Calls
14For assistance, please visit http://www.panasonic.com/help
Making calls
1Lift the handset and dial the phone 
number.
LTo correct a digit, press  {CLEAR }.
2Press  {C}.
3When you finish talking, press  {OFF } or 
place the handset on the base unit.
Note:
L If an alarm tone sounds in step 2, move 
closer to the base unit or place the 
handset on the base unit, and try again.
L If additional dialing is necessary after 
using speed dialing functions such as 
phonebook dialing or...

Making/Answering Calls
For assistance, please visit http://www.panasonic.com/help15
Useful features during a 
call
Automatic security code setting
When you place the handset on the base 
unit for the first time after connecting the 
AC adaptor, the unit automatically selects 
one of more than 65,000 security codes. 
Mute
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
To mute your voice, press  {MUTE }.
L To return to the conversation, press 
{MUTE }.
For Call...

Phonebook
16For assistance, please visit http://www.panasonic.com/help
Handset phonebook
You can add up to 10 items to the handset 
phonebook and search for phonebook 
items by name.
Storing names and numbers
1Press {FUNCTION }.
2Press a memory station number  {0 } to 
{ 9 }.
L You can also select the desired 
memory station by using  {V} or {^} .
L If an item is already stored, that 
information is displayed.
L The memory station number  {1 } is 
shown as “ 01”, and  {0 } is shown as 
“ 10 ” in the...

Phonebook
For assistance, please visit http://www.panasonic.com/help17
3Press {^} to scroll up from the memory 
station “ 01”, or  {V} to scroll down from 
the memory station “ 10”.
L You can also find the items using the 
memory station numbers  {0 } to  {9 } 
directly.
L The memory station number  {1 } 
shows “ 01”, {0 } shows “ 10” on the 
display.
4Press  {C}.
Note:
L If “ EMPTY ” is displayed in step 2, no item 
is stored in the memory station.
L If the phone number is more than 12 
digits, the...

Caller ID Service
18For assistance, please visit http://www.panasonic.com/help
Using Caller ID service
This unit is Caller ID compatible. To use 
Caller ID features, you must subscribe to 
Caller ID service of your telephone service 
provider.
Caller ID features
When an outside call is being received, the 
calling party’s name and telephone 
number are displayed.
Caller information for the last 40 different 
callers is logged in the caller list by the 
most recent call to the oldest.
LGenerally caller...

Caller ID Service
For assistance, please visit http://www.panasonic.com/help19
Viewing the caller list and 
calling back
1Press {V} or {^}  to enter the caller list.
2Press  {V} to search from the most 
recent call, or  {^} to search from the 
oldest call.
3Press  {C}.
Note:
L If the caller list is empty, you cannot 
enter the caller list by pressing  {V} or 
{^} .
L Once new calls have been checked, 
“NEW ” is not displayed.
Editing a caller’s phone number 
before calling back
You can edit a phone...

Answering System
20For assistance, please visit http://www.panasonic.com/help
Answering system
Important:
LOnly 1 person can access the answering 
system at a time.
L When callers leave messages, the unit 
records the day and time of each 
message. Make sure the day and time 
have been set (page 12).
L You cannot operate the answering 
system during a phone call.
L While a caller message is being 
recorded, “ ” and the number of 
recorded messages are alternately 
displayed on the base unit.
Memory...